flitz
New Member
Posts: 3
|
Post by flitz on Apr 14, 2019 23:38:46 GMT
Hi! I have a Jetta TSI 2.0L CPLA engine (211hp gasoline turbo) Mexican make (I am from Brazil).
How should I run a turbo pressure actuator testing?
I tried going to Basic Testing on engine module, found the corresponding option, but when I long press the Start button, it never ends... No sound from any movement on the wastegate actuator.
I also tried with the engine running just in case and of course it gives the 24 error code (invalid sequence).
Is there any trick to get that test running?
Thank you very much!
|
|
|
Post by adiwob on Apr 15, 2019 6:32:52 GMT
Hi! I have a Jetta TSI 2.0L CPLA engine (211hp gasoline turbo) Mexican make (I am from Brazil). How should I run a turbo pressure actuator testing? I tried going to Basic Testing on engine module, found the corresponding option, but when I long press the Start button, it never ends... No sound from any movement on the wastegate actuator. I also tried with the engine running just in case and of course it gives the 24 error code (invalid sequence). Is there any trick to get that test running? Thank you very much! Hello, your ecu doesn't have testing function. You can look up through live data.
|
|