Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 26, 2020 21:01:36 GMT
pt16a4 it may help if you also add the following to dv52 (Australia) Great picture. The obd11 dev team managed to break the ability to send only the backup file (it has been raised) There is a workaround From your history screen select the filter
| From the filter screen you firstly just select the clear all option (this will untick everything)
Then select from the Time option 1 day (only if you do it on the same day)
Then select only Backup
You will now get a much smaller output file that will only contain the backup
|  |  |
good luck
|
|
arnau
New Member
Posts: 15
|
Post by arnau on Nov 27, 2020 8:33:47 GMT
See attached! Hope it helps! Attachments:history.txt (72.16 KB)
|
|
pt16a4
Junior Member
Posts: 83
|
Post by pt16a4 on Dec 2, 2020 9:48:24 GMT
Arnau, thanks!
I have not had time to try this, but will look over your backup and try posting my own as shown above.
|
|
pt16a4
Junior Member
Posts: 83
|
Post by pt16a4 on Mar 7, 2021 19:53:18 GMT
Hello all, Hope everyone is doing well, staying safe. Apologies for falling off on my own thread, but the restrictive measures here limited my ability to do any type of programming with the vehicle. I have finally pulled the attached backup. I did switch the body type of the vehicle after the fact, which is a small change. I will try comparing my backup to Arnau´s for any differences. Attachments:history.txt (64.22 KB)
|
|
pt16a4
Junior Member
Posts: 83
|
Post by pt16a4 on Mar 14, 2021 23:26:33 GMT
Have had a look through both backup files but cannot identify Audi pre sense nor the speed limit warning. Both features were previously accessible via MMI.
I did restore speed warning within the MMI vehicle settings, but it remains greyed out and inaccessible, "currently unavailable".
What am I missing?
|
|
pt16a4
Junior Member
Posts: 83
|
Post by pt16a4 on Mar 20, 2021 19:27:14 GMT
Completely at a loss here. I have compared my backup with arnau's with no luck.
I cannot find the speed warning or Audi pre sense within the MMI.
I have speed warning under my driver assist functions via the MMI, but it cannot be activated. It remains "currently unavailable"
Pre sense no longer displays.
Any hints here? I've run out of ideas.
|
|
pt16a4
Junior Member
Posts: 83
|
Post by pt16a4 on Apr 3, 2021 12:19:57 GMT
Recovered Audi Pre Sense menu.
Adaptations: AWV
The function is visible via MMI, but not activated.
Unsure of which data bus to use.
"AWV_0x1B_msg_bus: comfort data bus"
Anyone know if this is the correct message bus?
|
|
pt16a4
Junior Member
Posts: 83
|
Post by pt16a4 on Jan 12, 2022 11:23:10 GMT
Digging this topic up.
Speed Warning & Pre Sense are visible via the MMI, but cannot be selected; "currently unavailable" and greyed out.
I believe Pre Sense is related to AWV in Adaptations 5F. Unsure of the correct msg bus.
As for Speed Warning, I do not know which Adaptation has populated this setting within the MMI, Driver Assist Functions.
Both settings were previously selectable via MMI.
Can anyone with these settings available share their Adaptation settings?
|
|
djidji
Closed beta tester
Posts: 2
|
Post by djidji on Dec 26, 2022 23:33:13 GMT
if you still need it
01940101FF0A000053111101000B00102F0101E5017001009E
|
|
pt16a4
Junior Member
Posts: 83
|
Post by pt16a4 on Oct 13, 2024 23:40:42 GMT
Yet to figure this out.
Speed Warning & Pre Sense are visible in the MMI, but cannot be selected: "currently unavailable" and greyed out.
Which Adaptation has populated these menus? What is the correct message bus?
|
|
