|
0.44.0
Aug 16, 2021 5:55:55 GMT
Post by Til on Aug 16, 2021 5:55:55 GMT
Use the following format to report bugsDescription of bug: your bug descriptionAndroid software version: your android version Phone: your android phone modelDongle variant: Firstgen or Nextgen Car: your vehicle brand, model and year App profile: your app user email or username Changelog
v0.44.0 - Fixed not showing bluetooth devices for some phones In case you cannot see the update in your Play Store/AppGallery yet, you can download the application directly via this link.
|
|
Deleted
Deleted Member
Posts: 0
|
0.44.0
Aug 17, 2021 7:38:14 GMT
Post by Deleted on Aug 17, 2021 7:38:14 GMT
Description of bug.
New one click add was released today for the Cupra Formentor but when I look at the apps page it does not show it as a NEW item. It has added the app just does not tell you its a new app.
Android software version 9.0 Phone Sony Experia Dongle variant - offline so not relevant Car Cupra Formentor App profile cupra280.co.uk
|
|
|
0.44.0
Aug 17, 2021 11:14:35 GMT
Post by OBDeleven on Aug 17, 2021 11:14:35 GMT
Hello,
thank you for reporting to us. We have tested this function and we did not found any issues at our end. The message "NEW" will disappear right once you will open the applications again. It will show you "NEW" only for the first time, if you will open it again, it will no longer show you "NEW".
|
|
|
0.44.0
Aug 17, 2021 11:32:32 GMT
via mobile
Post by cioce on Aug 17, 2021 11:32:32 GMT
"New" is present here if I look Formentor apps first time, for me there is no bug.
|
|
Deleted
Deleted Member
Posts: 0
|
0.44.0
Aug 17, 2021 11:57:52 GMT
Post by Deleted on Aug 17, 2021 11:57:52 GMT
Thank you, To confirm on the first one click app you built for me I saw the NEW.
On the second one I did not get it.
Can you just confirm when the new goes, is it after i open the app a second time, or is it after I have gone to a specific model (as I have multiple cars in my garage) a second time.
And just another bit of information, I just logged into my iOS Phone and neither of these apps is showing as new so am i correct in guessing that the flag is held against the user account.
|
|
Deleted
Deleted Member
Posts: 0
|
0.44.0
Aug 18, 2021 10:02:46 GMT
Post by Deleted on Aug 18, 2021 10:02:46 GMT
Description of Bug: Backup issues - I have reported these before but still outstanding.
Ran a backup of Control unit 17 with the Lap Timer turned on, this shows I have 69 Adaptation channels backed up Ran one click app Lap Timer and Removed it Ran a backup of Control unit 17 without Lap Timer enabled, this now shows I have 68 Adaptation channels backup up.
For me I expect the backup to include all settings even if they are not enabled so that I have a complete backup of the cars settings, this is currently not the case.
It is still not a simple process to email a single control unit backup via email (you have to use type and date filters) unlike full backup which is one click.
Format of data between Android and IOS is different (lover vs upper case, Adaptation channel names with underscore without underscore) in themselves these are all minor differences but it just means I have to do extra coding to compare output files when they are supposed to be the same.
Car Seat Leon Cupra 280 2014 Phone Sony Experia Android Version 9.0 Dongle - Next Gen profile name - cupra280.co.uk
|
|
Deleted
Deleted Member
Posts: 0
|
0.44.0
Aug 26, 2021 18:25:14 GMT
Post by Deleted on Aug 26, 2021 18:25:14 GMT
Descripton of Bug: My Car info screen: Still cant email details using GMAIL Screen does not show all the detail on all cars, on my car (and many others in my garage ) i only get Engine code and under power it shows just the value kW(HP) but no values. However on other cars i get Engine Code, actual values for Power, Volume, Cylinders and Remark Scan results Under settings you can say if you want scan results as Icon's or Numbers, however when you first run a scan it always gives you ICON'S even though its set in settings to show Numbers. To be fair after you run it you can go to settings and turn it to icons and back to numbers and then results are shows as numbers. But it does not work on the first run. I will add back again the single control unit backup you cant just email like we used to be able to Control unit 56 (Radio) is still showing in offline view
Full Backup process when running shows on some control units 101% and on my car the A9 stops at 96%
These all strike me as very simple fixes (as they all used to work) would be nice Car Seat Leon Cupra 280 2014 Phone Sony Experia Android Version 9.0 Dongle - Next Gen profile name - cupra280.co.uk
|
|
|
0.44.0
Aug 28, 2021 10:42:32 GMT
via mobile
Post by oleg1972 on Aug 28, 2021 10:42:32 GMT
I bought a scanner with a version of about 2 years ago. Everything worked. I activated many functions on the Skoda a7. Today I went into the application but I can not change the settings. I will write to update to the version about.
|
|
vasp
New Member
Posts: 2
|
0.44.0
Aug 28, 2021 14:41:22 GMT
via mobile
Post by vasp on Aug 28, 2021 14:41:22 GMT
Description of bug: gauges stay on only a few seconsa Android software version: 11 Phone: Samsung galaxy ultra 21 Dongle variant: Firstgen pro Car: audi rs6 c6 11/2008 App name: vasilis3690@gmail.com
|
|
Deleted
Deleted Member
Posts: 0
|
0.44.0
Aug 29, 2021 9:16:48 GMT
Post by Deleted on Aug 29, 2021 9:16:48 GMT
Description of Bug: Not seen this one before but i have run a full backup on IOS and then done a Full Backup on Android to compare the two items. First thing I notice on Control Unit 17 and 19 the Live Data count on Android is 2 Items lower than on IOS, I have raised it directly but just letting others know.
Secondly Control Unit 03 Brakes when viewing backup offline
On Android under Developer_Function_105 Firstly the label has Underscores but IOS does not Secondly I now get Access authorization required, perform login
On IOS I Get under Developer Function 105 Delay interface for electro-mechanical parking brake Value = Activated.
and just to add to this I see this a lot on this control unit.
Doing a tick off on the Adaptation values, the cound is the same however in IOS I get one extra items called Could not parse from current odx file, you can change odx version in control unit info, i did look to change it but there was only one ODX File so cant change it. However when I look at the Android backup I dont have this item and when I look at the IOS Backup in Android it also does not show this value.
Car Seat Leon Cupra 280 2014 Phone Sony Experia Android Version 9.0 Dongle - Next Gen profile name - cupra280.co.uk
|
|
Falck
New Member
Posts: 8
|
0.44.0
Aug 30, 2021 16:02:11 GMT
via mobile
Post by Falck on Aug 30, 2021 16:02:11 GMT
Description of bug: OBDeleven app crashes when pressing connect button
Android software version: Android 12 Beta
Phone: Google Pixel 5
Dongle variant: Firstgen
Car: Volkswagen Golf GTE, 2016. Also all other cars
App profile: Falck
Seems like problems interfacing with Bluetooth on latest Android?
|
|
|
0.44.0
Aug 31, 2021 0:32:51 GMT
Post by hasnuddin on Aug 31, 2021 0:32:51 GMT
Description of bug: Vehicle pictures are upside down despite the fact that original pictures are formatted correctly Android software version: Android 11 Phone: Samsung Galaxy Note 20 Ultra 5G Dongle variant: Nextgen Car: Volkswagen Passat B8 (2019) and Volkswagen Golf Mk7 (2015) App profile: hasnudh@yahoo.com Attached screenshot:
|
|
|
0.44.0
Sept 1, 2021 8:18:05 GMT
Post by johnwick on Sept 1, 2021 8:18:05 GMT
Description of bug: OBDeleven app crashes when pressing connect button Android software version: Android 12 Beta Phone: Google Pixel 5 Dongle variant: Firstgen Car: Volkswagen Golf GTE, 2016. Also all other cars App profile: Falck Seems like problems interfacing with Bluetooth on latest Android? I also have same issue problem, did you find the solution? if you find the solution, please give me the solution. Update: I have solved my problem by using BlueDriver Bluetooth Adapter. I read this review obd2scannertools.org/obd2-scanner/bluedriver-bluetooth-adapter-best-obd2-scanner-review/ article and purchase the product. This BlueDriver tools find out the problem and I solved the issue.
|
|
Deleted
Deleted Member
Posts: 0
|
0.44.0
Sept 3, 2021 13:29:34 GMT
Post by Deleted on Sept 3, 2021 13:29:34 GMT
Description of Bug: More info on backup differences. I was testing out the difference on a single control unit backup when you enter a specific security access code. I also changed the Diagnostic session to see what difference it made. What I now see is if I run a single control unit backup then by default the system uses Diagnostic type VW-Diagnostic mode However when you do a full backup it uses OBD-Diagnostic mode
This testing was done only on Control unit 03 others may be different.
So what you might ask, well the answer is all the values on the Full Backup in my Brake control unit with description of Developer_Function_xxx are shown with "Access authorization required, perform Login" and there is no detail but there is in the single control unit backup Secondly any field with a value of ---: is also marked as "Access authorization required, perform Login" Thus the full backup does not provide you with the full backup. I have not yet tried changing the Diagnostic mode before I run the full backup but will do that over the weekend and revert with findings.
UPDATE Just checked backup on my IOS Phone and when you do a full backup on IOS by default it appears to use VW-Diagnostic mode so looks like another difference between the two systems.
Car Seat Leon Cupra 280 2014 Phone Sony Experia Android Version 9.0 Dongle - Next Gen profile name - cupra280.co.uk
|
|