Lights modifications

Shoutbox

jagamichi: Highest Value Bit = left Aug 3, 2020 12:27:55 GMT
valentin: Thanks! i need to figure out what code i need to replace bbf3 for the error to not come back Aug 3, 2020 13:56:04 GMT
EGG71: ALGUIEN A CAMBIADA LA CINTA RELOJ GOLF 2016 COMO SE CODIFICA Aug 3, 2020 16:34:39 GMT
vwcalifornia2020: forum.obdeleven.com/thread/8199/post-2020-models-obd11-devices Aug 4, 2020 19:35:41 GMT
vwcalifornia2020: ok so odb11 does not work with 2020 models! if I had read this before I wouldn't have bought it !! not cool ! it is not specified on the website that it is until 2019 !! it is noted from 2016 -...

Aug 4, 2020 19:36:02 GMT
testeronline: just to be clear VAG have introduced new security on MQB Platform motors that all devices will need to deal with (VCDS, OBD11, caristaapp, VCP Etc) but they are all building the interface Aug 4, 2020 19:43:38 GMT
testeronline: as VAG have been slow in passing info on to these tools. However I agree OBD11 Should be clear in what cars can fully use Coding and Which cars cant. Aug 4, 2020 19:44:27 GMT
testeronline: I have already today told support that there web site is incorrect showing it can do stuff it cant (copy and paste error in my opinion) Aug 4, 2020 19:45:00 GMT
vwcalifornia2020: i hope Aug 4, 2020 19:46:35 GMT
testeronline: It works on Android (to scan) the SFD Issue is across all devices so will get sorted in time so its a bug raise issue with support via the Apple report bug Aug 4, 2020 19:47:58 GMT
dermot: I have obdeleven & credits 215. Cannot start any changes due to grayed out check mark, will not except changes. I have all correct hardware. interested in the tail pop function on a VW Golf R.. Please help me..! Aug 5, 2020 21:10:25 GMT
wolf: i have a 2002 audi a6 quattro 2.8l and it runs good but lately it wants to turn over but not start i replaced the cam position sensors and still have the problem any suggestions Aug 6, 2020 1:31:15 GMT
wolf: no codes Aug 6, 2020 1:32:33 GMT
b97: is there a list or manual of all codings with obd11? Aug 6, 2020 8:45:35 GMT
dvs7biz: Wolf, check the Variable Valve Timing Control (N205) Valve. I had similar problem and replaced cam position sensor and crankshaft position sensor with no positive results. After breaking down engine it was the Variable Valve Timing Control (N205) Valve. Aug 6, 2020 9:02:06 GMT
GTA: gTs Aug 8, 2020 20:58:55 GMT
Idkwhattoputhere: Can anyone point me in the right direction for instructions on how to CHANGE (not reset) the value or mileage at which the dashboard notification comes on for Inspection being due?? I know how to reset and change both the service and inspection intervals Aug 9, 2020 3:24:22 GMT
Idkwhattoputhere: Ive already reset both, and changed the max values from a 10k interval to a 5k interval. But now my dash, not MMI, is giving me a notification whenever I start or stop my car. How do I completely disable that notification or change it to come on at 500 mi Aug 9, 2020 3:25:38 GMT
dv52 (Australia): @idkwhattoputhere: Try this - Dashboard module - Adaptation - ESI: Resetting ESI - change to "no warning" Aug 9, 2020 22:36:58 GMT
ArghRUS: Hello? can anyone explain me what is long coding 0? long coding 1& Aug 10, 2020 8:51:55 GMT
Shout as:
Refresh
  • Bold
  • Italic
  • Underline
  • Strikethrough
  • Link
  • Insert Smiley
0/256 Send Cancel