Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 30, 2018 13:09:10 GMT
Google shows the following
Fixed issues with K-Line and CAN control module access.
Heads up about installing this or any other release that updates the dongle firmware:
Today for the first time the update process started but came up with error message saying did not work make sure all requirements etc are met try again.
Just as I was about to hit the try again button i noticed my radio came up with message telling me my phone had bluetooth connected, when I tried again worked fine. So I am guessing that if we have firmware updates you need to make sure you phone is connected to car first before trying, just saves the annoying error message.
|
|
woo
New Member
Posts: 18
|
Post by woo on Mar 30, 2018 13:38:09 GMT
I tried to connect to the 9 central electronics, only load data ... I have been trying for more than three hours
polo 2016
android 7.0
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 30, 2018 13:48:59 GMT
clear app data first and then try again.
|
|
woo
New Member
Posts: 18
|
Post by woo on Mar 30, 2018 13:56:50 GMT
Deleted it.
Installed.
No way.
Version 0.9.3.1
I got it all over.
|
|
woo
New Member
Posts: 18
|
Post by woo on Mar 30, 2018 18:14:23 GMT
현재 미국의 Google 스토어에서 0.9.3.1 버전을 다운로드하고 항목 9 중앙 전자 기기 만 계속로드합니다. 도와주세요. 캐시를 삭제하고 데이터를 삭제했지만 실행할 수 없습니다.Attachments:
|
|
|
Post by zeal8080 on Mar 31, 2018 11:20:17 GMT
I used 9.3.1 with HUAWEI MediaPad M3 and Android 7. I could not sent history file by e-mail yet.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 31, 2018 11:28:04 GMT
|
|
|
Post by parigot47 on Mar 31, 2018 17:30:32 GMT
Same problem Version 0.9.3.1 App data clear
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 31, 2018 18:14:09 GMT
Guys its the weekend so i don't expect you will get anything from support team.
If the app data clear, Uninstall and Reinstall does not work then can you provide Phone, Android Version and Car just so they can hopefully work out what issue is affecting you (because mine is fine). Also if possible you should try it on another device and see if it works on that one.
|
|
|
Post by parigot47 on Mar 31, 2018 18:23:59 GMT
No problem, I can wait until next week Android 7 Phone Huawei 10 Skoda Fabia 2017 Only the 09 central electrics is not accessible But of course the problem is not the phone since with the old version of obd11 it worked
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 1, 2018 13:55:28 GMT
Dev team just to add to this i have no problems with my car and Samsung phone using Android v7 as stated earler.
However just tried using a Huawei mya-l11 phone running android v6 and I was able to connect and access Control 09 however a lot of the things i tried to do i got error message control unit not responding, I then logged off and turned off the bluetooth on the car and tried again and whilst it was not as fast as my phone (but its different phone provider whos internet signal is not as strong) I ran the same test's and this time all was ok, turned bluetooth back on and still everything worked.
Have moved this thread to the 0.9.3.1 one so that the issues are kept in the same place.
|
|
woo
New Member
Posts: 18
|
Post by woo on Apr 1, 2018 14:09:49 GMT
I.
Android 7.
Polo 2016 Style
Samsung Galaxy 5, LG V10
I've tried both, but the same thing happens.
|
|
|
Post by westindies on Apr 2, 2018 18:52:31 GMT
Hi everyone,i just switch from a Q3 to and Audi Q5 and still sad to see that there is no basic settings for transmission available? Will the coding or a App on the way?
Thanks
|
|
|
Post by OBDeleven on Apr 3, 2018 8:55:59 GMT
I tried to connect to the 9 central electronics, only load data ... I have been trying for more than three hours
polo 2016
android 7.0 Please try to connect to Central electrics control unit now and then send me error log by pressing three dots in top right corner of app.
|
|
|
Post by OBDeleven on Apr 3, 2018 8:56:55 GMT
No problem, I can wait until next week Android 7 Phone Huawei 10 Skoda Fabia 2017 Only the 09 central electrics is not accessible But of course the problem is not the phone since with the old version of obd11 it worked Please try to connect to Central electrics control unit now and then send me error log by pressing three dots in top right corner of app.
|
|
woo
New Member
Posts: 18
|
Post by woo on Apr 3, 2018 14:45:53 GMT
OBDeleven Developer! 1.Please try to connect to Central electrics control unit now and then send me error log by pressing three dots in top right corner of app. ? re: Loading data ... screen only repeats continuously. You can send error log from the screen after loading data ... But the loading data circle keeps spinning. It keeps spinning for hours. Loading data ... does not go over the screen after this. (As in the picture, other items appear like that. But only 9 central electronics Infinite Loading data ... is displayed.) Attachments:
|
|
woo
New Member
Posts: 18
|
Post by woo on Apr 3, 2018 14:53:06 GMT
2. Only the 9 central electronics keeps spinning. (1) Samsung Galaxy s5 (2) LG V10 (3) xiaomi Be the same symptom.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 3, 2018 15:21:32 GMT
|
|
|
Post by OBDeleven on Apr 4, 2018 9:34:02 GMT
OBDeleven Developer! 1.Please try to connect to Central electrics control unit now and then send me error log by pressing three dots in top right corner of app. ? re: Loading data ... screen only repeats continuously. You can send error log from the screen after loading data ... But the loading data circle keeps spinning. It keeps spinning for hours. Loading data ... does not go over the screen after this. (As in the picture, other items appear like that. But only 9 central electronics Infinite Loading data ... is displayed.) Please try to do the following: After app hangs on spinning turn ignition off > put phone to sleep > wake up your phone > app will say that unable to access control unit > press cancel > press three dots and send the log
|
|
woo
New Member
Posts: 18
|
Post by woo on Apr 4, 2018 12:18:01 GMT
I wrote it down. Where are the three dots on the right? Please explain how to send the error log. Run obdeleven APP → Run 9 central electronics → CAR off → phone OFF → phone ON → Run obdeleven APP → App will be available to control access unitpress → press three dogs and the log Is this order correct? If this is true After the mobile phone is switched on, Run obdeleven APP → App will be available to control access App will be available to control access This doesn't come out. Run obdeleven APP You'll see the same screen immediately as you did in picture 1. There are no three dots on the right. I'm sorry. Please explain more easily ... Attachments:
|
|
|
Post by OBDeleven on Apr 6, 2018 11:15:55 GMT
Please uninstall your app then download and install this version of obdeleven.com/application/test/OBDeleven.apk with this version app will not hang on Loading data, but it will show you dialog with message "Communication error with control unit" after you get this message press cancel and report error via three dots. woo: now you must see three dots in top right corner
|
|
woo
New Member
Posts: 18
|
0.9.3.1
Apr 6, 2018 13:18:15 GMT
via mobile
Post by woo on Apr 6, 2018 13:18:15 GMT
Please uninstall your app then download and install this version of obdeleven.com/application/test/OBDeleven.apk with this version app will not hang on Loading data, but it will show you dialog with message "Communication error with control unit" after you get this message press cancel and report error via three dots. woo: now you must see three dots in top right corner I sent it with 9 central electronics no! Did you confirm the error?
|
|
|
Post by OBDeleven on Apr 6, 2018 13:22:19 GMT
To send correct LOG You will need to connect to your vehicle > go to Central electrics control unit > send log after you get error message "Communication error with control unit" Anyway thank you for your help
|
|
woo
New Member
Posts: 18
|
Post by woo on Apr 6, 2018 14:31:07 GMT
To send correct LOG You will need to connect to your vehicle > go to Central electrics control unit > send log after you get error message "Communication error with control unit" Anyway thank you for your help I sent it another way. I think I've done everything I can. Now please catch the developer bug. I really want to use the 9 central electronics. re: send log after you get error message "Communication error with control unit" No matter what you try, you can't get to the number 9. car Acc off → Run obdeleven APP→ 09 central electronics Loading data... Infinite repetition Loading data.
|
|
|
Post by krystian660 on Apr 6, 2018 20:07:05 GMT
Fabia 2015 - same issue. Can't connect with STG 09.
|
|
|
Post by stretch on Apr 6, 2018 23:33:19 GMT
Same issue: infinite "loading data" on any attempt to communicate with module 65 or 0f and likely some others. Been trying to work with the developer, but I cannot get the app to produce the "cannot communicate" error so I can send proper log. One it's in that never-ending state of "loading data", the only way to interrupt it is to close the app with app manager.
|
|
|
Post by Martynas Šileika on Apr 9, 2018 5:13:51 GMT
Same issue: infinite "loading data" on any attempt to communicate with module 65 or 0f and likely some others. Been trying to work with the developer, but I cannot get the app to produce the "cannot communicate" error so I can send proper log. One it's in that never-ending state of "loading data", the only way to interrupt it is to close the app with app manager. Stretch, to help us out with the log you have to uninstall your app and install it from obdeleven.com/application/test/OBDeleven.apk with this app you will get 'cannot communicate' error.
|
|
|
Post by Martynas Šileika on Apr 9, 2018 12:40:12 GMT
Same issue: infinite "loading data" on any attempt to communicate with module 65 or 0f and likely some others. Been trying to work with the developer, but I cannot get the app to produce the "cannot communicate" error so I can send proper log. One it's in that never-ending state of "loading data", the only way to interrupt it is to close the app with app manager. Hello again, we got your logs but you do it wrong. You have to open the app, connect to vehicle, then go to control unit 65 and after you get message communication error, dont kill app. you should press cancel and then do a report via three dots in the upper right corner.
|
|
|
0.9.3.1
Apr 10, 2018 16:34:21 GMT
via mobile
Post by adrian on Apr 10, 2018 16:34:21 GMT
Hello. Since the latest device update, i cant connect to my device. Does Not respond. Can somebody help me. If i put the device in to the port, the green light flashes two times. And if i try to connect, the green light doesnt flash like before the device update.
|
|
|
Post by krystian660 on Apr 10, 2018 23:05:32 GMT
New issue: Module with TP 1.6 not working - Seat Ibiza 6j can't connect with brakes, steering assist.
|
|