|
0.9.8
Nov 2, 2018 10:05:46 GMT
Post by krystian660 on Nov 2, 2018 10:05:46 GMT
Update. Without adding part number I can post offer.
If offer is posted I can edit and fill part number.
|
|
|
0.9.8
Nov 2, 2018 12:22:22 GMT
Post by monsun77 on Nov 2, 2018 12:22:22 GMT
After the upate over Playstore the dongle got a new update. After that the apps works fine. No problems anymore.
|
|
|
0.9.8
Nov 2, 2018 13:13:57 GMT
Post by Thirsty on Nov 2, 2018 13:13:57 GMT
Can connect now but it took me 3 tries until it finally worked. All ECUs are listed and accessable.
|
|
|
0.9.8
Nov 2, 2018 19:37:54 GMT
via mobile
Post by szafa24 on Nov 2, 2018 19:37:54 GMT
U mnie to nie działa po aktualizacji. Dalej nie mogę skanować ponieważ moduły się nie wyświetlają.
|
|
|
0.9.8
Nov 2, 2018 22:30:09 GMT
Post by dmortimer3001 on Nov 2, 2018 22:30:09 GMT
All working again 👍🏼 thank you guys
|
|
|
0.9.8
Nov 2, 2018 22:57:14 GMT
Post by krystian660 on Nov 2, 2018 22:57:14 GMT
I have the impression that the coding history does not show adaptation, even though the filter should be.
|
|
|
0.9.8
Nov 3, 2018 12:44:47 GMT
via mobile
Post by szafa24 on Nov 3, 2018 12:44:47 GMT
U mnie nie działa. Nie wyświetlają się moduły. Z urządzeniem telefon się łączy. Nie można skanować.
|
|
Deleted
Deleted Member
Posts: 0
|
0.9.8
Nov 3, 2018 13:59:32 GMT
Post by Deleted on Nov 3, 2018 13:59:32 GMT
I have the impression that the coding history does not show adaptation, even though the filter should be. I have a user telling me the same thing, only can see long coding not adaptation
Also when you go into App there is an Archive history function can somebody confirm what this is supposed to do and can you get it back afterwards.
Secondly I made two changes using Heated Seats memory app (all good) but I am not able to email only archive the changes however older changes I can email.
|
|
|
0.9.8
Nov 3, 2018 16:36:06 GMT
Post by bbertu98 on Nov 3, 2018 16:36:06 GMT
after the last update of the app, in my car there are 2 new modules about the left and right led headlights. Nice
|
|
probd
New Member
Posts: 12
|
0.9.8
Nov 3, 2018 18:42:23 GMT
Post by probd on Nov 3, 2018 18:42:23 GMT
As 0.9.8 seems to have some connection issues, what exactly is the version number of the fixed (beta) app? Still 0.9.8 (which would be rather confusing)?
I didn't use the app since the update, so my dongle will most likely get the firmware update next time I use it. By then, I'd like to be sure to have the fixed app release on my mobile device to avoid any issues.
|
|
|
0.9.8
Nov 3, 2018 19:39:06 GMT
Post by Thirsty on Nov 3, 2018 19:39:06 GMT
As 0.9.8 seems to have some connection issues, what exactly is the version number of the fixed (beta) app? Still 0.9.8 (which would be rather confusing)? I didn't use the app since the update, so my dongle will most likely get the firmware update next time I use it. By then, I'd like to be sure to have the fixed app release on my mobile device to avoid any issues. Take a look at this post: forum.obdeleven.com/post/20440This is 0.9.8 beta where the connection works.
|
|
Phil
New Member
Audi A4 Quattro 2.0T 2007
Posts: 10
|
0.9.8
Nov 6, 2018 6:09:42 GMT
Post by Phil on Nov 6, 2018 6:09:42 GMT
I can connect to my dongle but it seems that there is a connection issue. I can not access to any controls units and full scan keeps running without giving any results. (see screenshots attached) I see the battery voltage and I can access to some gauges though. Software version 0.9.8, Audi A4 B7 2007 , tested on my phone and my tablet. I sent a report via the 3 dots in the top right corner. Thanks
|
|
|
0.9.8
Nov 6, 2018 7:37:45 GMT
via mobile
Post by testman on Nov 6, 2018 7:37:45 GMT
I can connect to my dongle but it seems that there is a connection issue. I can not access to any controls units and full scan keeps running without giving any results. (see screenshots attached) I see the battery voltage and I can access to some gauges though. Software version 0.9.8, Audi A4 B7 2007 , tested on my phone and my tablet. I sent a report via the 3 dots in the top right corner. Thanks View Attachment View AttachmentView AttachmentHello, I think i have the same issue. forum.obdeleven.com/thread/4115/golf-4-ecus-detectedI used v0.98 Best regards
|
|
|
0.9.8
Nov 6, 2018 7:42:23 GMT
Post by Thirsty on Nov 6, 2018 7:42:23 GMT
|
|
|
0.9.8
Nov 6, 2018 7:53:25 GMT
via mobile
Post by testman on Nov 6, 2018 7:53:25 GMT
Hello, No, i used the playstore version. 0.9.8
|
|
|
0.9.8
Nov 6, 2018 8:13:00 GMT
Post by Thirsty on Nov 6, 2018 8:13:00 GMT
Use that beta it's the version where the connection is fixed
|
|