Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 25, 2019 20:30:22 GMT
Since release version 0.9.5 the control unit information has been available off line. This now included Faults, Long Coding and Adaptation as well as access to the History for that control unit. When you select Control unit from the main car menu you will get the following screen
The big difference is that all the control unit numbers are in a Grey circle rather than the normal green or red. FIRSTLY PLEASE NOTE for the values to be available off line you must first do a backup of the control unit and you must be connected to the internet.
When offline and you select a control unit you will get this screen
INFO - This will show you the standard detail of the control unit
Faults - This will show you a list of the faults that have not been cleared from the last scan
Long Coding - This will show you the standard long coding screen (Bytes and Bits and Descriptions) you can add in descriptions and if there are multiple options you can see those options BUT you will not be able to make any changes this is a VIEW ONLY View.
Adaptation - As with the long coding it will show you you current setup (once you have done a backup all changes you make will be updated to the offline view. As with Long Coding you can see all the values on your car and are able to see the different options but again you cant make any changes
|
|
|
Post by vwjap on Mar 8, 2019 22:42:42 GMT
This is awesome
|
|