|
|
Post by steveb on May 6, 2019 20:49:22 GMT
Hi
For some reason after enabling the high beam assist , i get this error when starting the car. i disabled it and still get the error.
any help appreciated
Steveb
|
|
|
|
Post by sparklebeard on May 6, 2019 23:58:37 GMT
Did you so the Basic Headlight Settings and Acknowledge Headlight Settings?
|
|
|
|
Post by steveb on May 7, 2019 8:08:56 GMT
no I didn't, is that in the same section. however, i did read somewherecth that you need to have the right headlights for it as well.
i was just hoping to reverse the error
|
|
|
|
Post by Carolco on May 7, 2019 14:24:58 GMT
Hi.
what is the error?
what was your coding?
type of your lights....
|
|
|
|
Post by steveb on May 7, 2019 15:41:05 GMT
Hi, Golf R 2019, not sure of lights basically stock, as it's a lease. 4b multifunction module. Long coding I enabled High Beam assistance confirmed, started car and get attached error. tried previous suggestion, still get error thx Steve  |
|
|
|
Post by sparklebeard on May 7, 2019 17:43:57 GMT
Dumb question, but did you clear all the faults in OBD11?
|
|
|
|
Post by Carolco on May 7, 2019 18:33:48 GMT
Hummm.... very interesting. I think you coding the 4B unit. But it is necessary see what kind of lights do you have....
another question.... do you have A5 module? Camera in the front of car? Please make a photo. I send a mp to you
|
|
|
|
Post by steveb on Jun 25, 2019 21:54:28 GMT
Hi
Apologies, I must have missed an email a whole ago.
No there is no front camera.
I have done many resets and fault clears. Is there anything I can do to get an output of module 4b.
thx.
Steve
|
|
|
|
Post by ofektal8 on Jun 26, 2019 12:31:49 GMT
There should be a front camera, lane assist is enabled so the camera is there.
What were the changes you've made to activate HBA?
|
|
