|
Post by zimmen on Oct 13, 2019 9:45:03 GMT
Hi. I need some serious help with OBDeleven. Changed batteries in my keyfob, and now the lock/unlock don't work.
Tried to pair it as the manual says: "Unlock car with key, Press unlock, Key in ignition and ignition on, Ignition off remove key, Press unlock and lock key on remote"
But nothing happens. So I can't lock the car with the remote.
Tried every guide on YouTube but nothing works
So I thought I could do it with the Obdeleven, so I tried this one
In the comfort module(46), adaptations, in channel 00, I reset all the remote fobs by pressing and holding the green check mark
1a. In the comfort module(46), adaptations, in channel 01, enter 1 into the new value field and press the green check mark (do not press and hold) 1b. Press the unlock button on the first remote
But that don't work, I can clear the 00 channel, but in channel 01 I can't do anything.
So I need some help!
|
|
|
Post by philipos100 on Oct 14, 2019 15:47:19 GMT
Have you tried turning ignition on then pressing lock and unlock, take key out and try that.
|
|
|
Post by zimmen on Oct 15, 2019 4:31:44 GMT
Have you tried turning ignition on then pressing lock and unlock, take key out and try that. Yes I have, I think I have tried every tutorial that exist on the internet, and nothing works.
|
|
|
Post by mrrapp916 on Apr 23, 2021 15:29:13 GMT
In order for adaptation to work u can't have any faults on any control units then after clearing all key fone try storing keys in different memory slots, enter 1 as new value, press green check mark (don't hold button), press lock or unlock on key fone, now press and hold green check mark to save value. If that doesn't work enter new value of 2, then new value of 3, I think u have 4 or 5 memory slots for the keys so hope this helps.
|
|