Post by jacko on Apr 8, 2017 23:27:27 GMT
Hello, I have done something on "Green Menu" (Developer Mode) and I don't see road signs on Navi Maps. There is info "No date traffic signs available".
I scanned unit OBDeleven and I have seen - the coding was different. I back to original coding regarding backup info, coding is accepted and fault code "Control module incorrectly coded" disappeared. Only faults below are present:
And still I don't see road signs on Navi Maps (in "settings" options is checked as active). After analyzing all adaptations records from backup - I see, there are a lot of differences:
A lots of setting change "message bus" to "Comfort data bus". I don't know why - green menu is not safe, but I'm lucky man - I have a backup :-) How can I restore adaptations values back to Infrotainment unit? Please explain me how to do this.
Greetings
Jacko
I scanned unit OBDeleven and I have seen - the coding was different. I back to original coding regarding backup info, coding is accepted and fault code "Control module incorrectly coded" disappeared. Only faults below are present:
---------------------------------------------------------------
5F Information Control Unit
Software number: 5G0035043B
Software version: 0200
Hardware version: H40
...
Trouble codes:
U111100 - Function limitation due to missing message
static
U111100 - Function limitation due to missing message
static
U111100 - Function limitation due to missing message
static
U111100 - Function limitation due to missing message
static
And still I don't see road signs on Navi Maps (in "settings" options is checked as active). After analyzing all adaptations records from backup - I see, there are a lot of differences:
Adaptations:
Vehicle function list BAP:
UGDO_0x14_msg_bus:
Comfort data bus
Terminal 15 <- Original value!
AWV_0x1B_msg_bus:
Comfort data bus
Terminal 15 <- Original value!
traffic_sign_recognition_0x21:
Not activated
activated <- Original value!
traffic_sign_recognition_0x21_msg_bus:
Comfort data bus
Databus extended <- Original value!
Vehicle function list CAN:
MFL_msg_bus:
Comfort data bus
Databus Infotainment <- Original value!
Oil_level_msg_bus:
Comfort data bus
Databus drivetrain <- Original value!
A lots of setting change "message bus" to "Comfort data bus". I don't know why - green menu is not safe, but I'm lucky man - I have a backup :-) How can I restore adaptations values back to Infrotainment unit? Please explain me how to do this.
Greetings
Jacko