benjamino69uk
New Member
Loving ODBEleven, its so much fun making the car my own!
Posts: 18
|
Post by benjamino69uk on Sept 4, 2017 20:20:11 GMT
My 2016 Octy vRS has lane assist fitted as standard. I'm looking at using OBDeleven to programme the following:
High beam assist Traffic sign recognition
I've seen the programming to use via VCDS but does anyone have the coding for use via OBDeleven please?
|
|
|
Post by djduese on Oct 14, 2017 6:58:04 GMT
It is the same coding. Where is the problem?
|
|
benjamino69uk
New Member
Loving ODBEleven, its so much fun making the car my own!
Posts: 18
|
Post by benjamino69uk on Dec 17, 2017 17:03:59 GMT
Sorted.
This is what I did to get HBA working on my 2016 vRS:
High Beam Assist (for cars with Lane Assist Camera): Ensure light switch is in the OFF position, wipers not on auto, doors closed and ignition on, before starting
1. Control Unit 09 - Central Electrics
2. Control unit Long Coding
3. Byte 02
4. Bit 0-2: "03 Lighting Bi-Xenon with Light Assist"
5. Control Unit 09 - Central Electrics
6. Security code - 31347
7. Adaptation
8. Assistance Light Functions-Menuestuerung Fernlichtassistent
9. New Value: Present
10. Assistance Light Functions-Menuestuerung Fernlichtassistent Werkseinstellung
11. New Value: Present
12. Control Unit A5
13. Security code - 20103
14. Control unit Long Coding
15. Byte 02
16. Bit 0-7: "01 coding_Light/High_beam_assist" Optional settings 17. Controller A5 18. Security code - 20103 19. Adaptation 20. High beam assist urban detection area – Switch to No 21. Speed that HBA active set to 20kph 22. Speed that HBA deactivate set to 10kph 23. Change lux code to 10 Finally, go into the vehicle menu on the head unit, go to light settings and select ‘light assist’ Push the left stalk towards the front of the car, it should show the HBA logo at the bottom of the Maxidot.
Remember to select the green tick at each stage of the adaption, otherwise the changes you've made won't stick.
|
|
benjamino69uk
New Member
Loving ODBEleven, its so much fun making the car my own!
Posts: 18
|
Post by benjamino69uk on Dec 17, 2017 17:05:21 GMT
Sorted.
This is what I've done and it worked for me on my 2016 vRS:
Traffic Sign Assist Activation:
1. Control Unit 5F - Information
2. Adaptation
3. Car_Function_List_BAP_Gen2 4. traffic_sign_recognition_0x21 = Activated, then Green tick
5. Car_Function_Adaptions_Gen2 6. menu_display_road_sign_identification = Activated, then Green tick
7. menu_display_road_sign_identification_over_threshold_high = Activated, then Green tick
8. Control unit A5 (front / advance camera)
9. Security access - 20103
10. Control unit Long Coding
11. Byte 1
12. Bit 0 Activate - "01 Traffic Sign Recognition (FTE) active", then Green tick
13. Control unit 17 (Dashboard)
14. Control unit Long Coding
15. Byte 5
16. Bit 2 Activate, then Green tick 17. Display end of speed limit symbol in A5 adaptions
18. Control unit A5 (front / advance camera)
19. Adaptation
20. Display end of speed limit symbol 21. Importance to activate: Display valid additional signs
22. View Channel Valid suffix
23. Corresponding value: 00100111. (default was 100111)
Remember to select the green tick at each stage of the adaption, otherwise the changes you've made won't stick.
|
|
|
Post by psychodad on Jun 28, 2018 16:52:06 GMT
Hi. I got problems in activating the high beam, after set those things i grt an error in high beam assist when trying to activate the assistant
I am not sure about setting the two long codings in st9, is there a screenshot how it should look in odb11.
All other settings tried like sign reconigtion has worked.
I have a octavia 3 model year 2014
|
|