|
Post by fkaufman on Dec 6, 2017 13:25:11 GMT
Tried to change distance regulation default in Adaptive Cruise Control. The instructions I have say: ======================================== To change the Adaptive Cruise Control Preset distance , go to module 13 (distance regulation), then adaptation, Channel 7 and change from 0 to 1. Reboot your MMI and you will then have an option in your MMI under Car, driver assistance and Adaptive Cruise Control to set which of the 4 distances your car will default to when you activate your ACC. So what you need to do is go to channel 13 again, then on the right click adaptation. this will then give a box that on the left has read and save. click in the empty box next to those and type 7 and press read. it will then show its value underneath. (should show 0) change this value to 1 and click test and then save. this should then give you the option in your MMI once you have reset it. to find the option, go to car, driver assistance and its under adaptive Cruise. ======================================== However, when I go to Module 13, Adaptation it does not allow me to select by channel number, it gives me the sub-heading "Distance regulation can be activated". I do that, select "Yes", save it an it says "Adaptation accepted". But no change shows up in history and after rebooting the MMI there is no new option "Adaptive Cruise Control" entry under "Car, Driver assistance" to set which of the 4 distances the car will default to when I activate ACC.
|
|
|
Post by henryr01 on Apr 12, 2018 20:01:05 GMT
Subscribed...
|
|
|
Post by henryr01 on Aug 11, 2018 15:21:33 GMT
Did anyone get this to work on US model cars?
|
|
jdm
New Member
Posts: 1
|
Post by jdm on Sept 19, 2019 13:20:54 GMT
Same issue here - I know this is achievable with VCDS. In Auto Distance Regulation there is a drop down to select service channel and then an IDE value. We don't have that option in OBDeleven, it's pre-defined. I've reported a bug but not sure if we can get this mod working without an update to the adaptation page.
|
|
theai
New Member
Posts: 1
|
Post by theai on Sept 26, 2019 10:28:42 GMT
I did write the support about it. It's so much waste of time. It's like talking against walls. After more then 5 emails having no progress at all. They make me feel like a fool. 😬😡
|
|
|
Post by maggus992 on Nov 27, 2019 10:18:36 GMT
i've requested a one click app.
|
|
neso
New Member
Posts: 1
|
Post by neso on Dec 14, 2020 18:13:59 GMT
Is there any update or solution for this ?
|
|
hshah
New Member
Posts: 8
|
Post by hshah on May 7, 2021 21:37:34 GMT
Anyone have a solution for this?
|
|
|
Post by swisschopper on Nov 12, 2021 12:40:41 GMT
Up !
|
|
|
Post by napalm on Feb 11, 2023 21:02:41 GMT
It looks like this still doesn't work. Can't enable this in the menu and is one of the main reasons I bought OBDeleven Same issue as above. 2018 Audi s7.
|
|