|
Post by monty0881 on Jun 28, 2018 6:58:14 GMT
I'm looking to deactivate start stop on my CC.
I've been to the relevant module inorder to change the minimum voltage to 12.1V but I don't have the option to via obdeleven.... Mine is coming up with a temperature value for something... -50°F?
Anybody help?
|
|
|
Post by tomycro on Aug 17, 2019 18:28:35 GMT
Hello,
Did you manage to switch off start/stop?
|
|
|
Post by monty0881 on Sept 7, 2019 3:54:02 GMT
Hello, Did you manage to switch off start/stop? Nope I haven't looked into it any further... I just keep pressing the button to deactivate
|
|
|
Post by wackapayne on Sept 8, 2019 20:38:17 GMT
Ok I believe I have achieved this.
Connect to your CC
Open Gateway 19
Select Long Adaption
Enter Number 10 - stop start voltage limit
Value 1 - should be 7.6v
Where it says enter new value type 01 and make sure it says Hex not ASCII in the top right of the input area you can change it by clicking the text.
01 - changed mine to 12.4v
You can try with different numbers and the voltage will change in value 1.
When using this method you might get a warning when stop start would kick in saying voltage to low.
I am looking at changing the temperature factor to disable the SS system.
|
|
|
Post by wackapayne on Sept 9, 2019 15:44:56 GMT
So I have tested the method above it sort of worked so I decided to change the voltage to 13.9v to prevent it working 99.9% of the time and to do this I
Changed the value to 10 (Hex) and applied the voltage changed to 13.9v
I have test drove the car and no warnings just the symbol Stop Start is not active when stopping at lights
|
|
jtv
New Member
Posts: 1
|
Post by jtv on Jan 25, 2022 20:00:57 GMT
Hey! Can you tell me, what is the original hex value for the start stop voltage?
|
|
|
Post by burak3806 on Jan 26, 2022 6:48:18 GMT
Maybe u dont need coding try this and if you didnt press start stop button it will be off permantly.
|
|