sss79
New Member
Posts: 4
|
Post by sss79 on Jun 5, 2020 11:14:35 GMT
Hello! Does anyone know how to activate line assist on skoda kodiaq? Thank you!
|
|
|
Post by cusco112 on Oct 12, 2020 11:26:55 GMT
Hei,
Did you find out how to activate this??
|
|
sss79
New Member
Posts: 4
|
Post by sss79 on Oct 14, 2020 18:53:23 GMT
Not yet! Nobody answered.
|
|
|
Post by avinas on Nov 24, 2020 8:45:18 GMT
how to activate line assist???
|
|
|
Post by avinas on Feb 5, 2021 14:25:40 GMT
??
|
|
|
Post by CarActivate on Feb 24, 2021 21:01:02 GMT
Do you have aasssit camera?
|
|
|
Post by urbanm on Dec 12, 2021 9:06:29 GMT
This one worked for me on Karoq 2020.
Spurhalteassistent (Lane Assist) - Freischaltung (Variante 2)
Multifunktionskamera (Steuergerät A5 - "MQB_B_MFK"- Teilenummer beginnt mit 3Q0) muss verbaut sein, z. Bsp. bei Bestellung mit DLA und/oder VZE verbaut! Nach erfolgter Codierung sollte Busruhe abgewartet werden. Die Codierung in STG 10 ist nur notwendig, wenn das entsprechende Bit auch so beschriftet ist bzw. Fehler in den STG zurückbleiben.
STG A5 > Codierung > Byte 16 > Bit 7 aktivieren ("Spurhalteassistent (HCA) aktiv/verbaut [PR-7Y9]")
STG A5 > Zugriffsberechtigung: 20103 > Anpassung > …
> Kanal "Personalisierung Eingriffszeitpunkt bei Kl. 15 ein" > Wert auf "Letzte Einstellung" setzen
> Kanal "Personalisierung BAP" > Wert auf "nicht aktiv" setzen
> Kanal "Einschaltzustand Spurhalteassistent" > Wert auf "ein (Einstellung über Menü)" setzen
STG 5F > Anpassung > …
> Kanal "Car_Function_List_BAP_Gen2-LDW_HCA_0x19" > Wert auf "aktiviert" setzen
> Kanal "Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus" > Wert auf "Datenbus Extended" setzen
> Kanal "Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning" > Wert auf "aktiviert" setzen
> Kanal "Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning_over_threshold_high" > Wert auf "aktiviert" setzen
STG 17 > Codierung > …
> Byte 04 > Bit 6 aktivieren ("Spurhalteassistent / Lane Assist verbaut")
> Byte 11 > Bit 1 aktivieren ("Spurhalteassistent / Lane Assist Information (BAP) verbaut/aktiv")
STG 44 > Zugriffsberechtigung: 19249 > Codierung > Byte 03 > Bit 0 aktivieren ("Spurhalteassistent verbaut")
|
|
veki
New Member
Posts: 17
|
Post by veki on Dec 14, 2021 18:45:40 GMT
I have long coding let me find it and will post it but havent tried on mine yet.
|
|
fredski
New Member
Skoda Kodiaq Sportline MY20
Posts: 2
|
Post by fredski on Apr 7, 2022 11:26:14 GMT
Tried to active lane assist using the APPS on a Skoda Kodiaq MY20. Followed the procedure: do not run the engine at the moment of activation. Once it's changed from Original-> ON using the APPS I noticed 2 warning icons were lighted on in the dashboard: 1 of the engine and 1 of the electric stability. The INCAR procedure says: power off and power on the ignition. Both warning icons disappeared but the option to active the Lane Assist via car>setup>.. wasn't available. Waited for 15min also. One of the recommendations is having a multifunctional camera. I assume if traffic sign recognition works the car has an active multifunctional camera installed right? When scanning I have now a fault in Control Unit > Driver Assistance > Steering (interface for lane departure warning system not coded) / status:static / FaultCode:C10ACF2
Could you please help me?
|
|
hrsa
New Member
Posts: 2
|
Post by hrsa on Apr 24, 2022 16:55:43 GMT
Hello everyone, I wonder if you have managed to activate Line Assist by going around the apps?
I have a 4x4 Laurin&Klement 150TDI Kodiaq MY2019 (somehow identified as 2020 by OBDeleven), it's equipped with Columbus infotainment, auto park, 360 cameras, Front Assist, Traffic Sign Recognition, and all the other options - and it has a camera on the windshield. So it looks like it should be "ready" for Adaptive lane assist.
However, when i open the "Lane Assist" app in OBDeleven, i get the message "not supported", with no option to even turn it on While other apps (wheel vibration, adaptive lane assist sensivity) seem to be "supported" - at least i don't get the "not supported" message.
Is there a way to activate it via Long Code? Do i need a Pro subscription?
Thank you in advance.
|
|
hrsa
New Member
Posts: 2
|
Post by hrsa on Apr 26, 2022 19:43:56 GMT
Alright, i've managed to activate Lane assist and High beam assist via long coding! For those who want to find a solution - get some basic German knowledge and start looking for "MQB Codierungen" document (or contact me to get one). I followed their coding instructions, and it works really fine!
The apps aren't useless nevertheless : i've installed the "easy entry" and "show fuel capacity" in a couple of clicks.
|
|
|
Post by alin82 on Sept 19, 2022 19:00:28 GMT
Hi, I have lane assist on my kodiaq2021, but there is no active guidance option. Can that be added?
|
|
|
Post by majestic23 on Aug 4, 2023 17:34:20 GMT
Alright, i've managed to activate Lane assist and High beam assist via long coding! For those who want to find a solution - get some basic German knowledge and start looking for "MQB Codierungen" document (or contact me to get one). I followed their coding instructions, and it works really fine! The apps aren't useless nevertheless : i've installed the "easy entry" and "show fuel capacity" in a couple of clicks. Ok, so I’ve same Config Hard in my Kodiaq 2019 but I’ve never found coding instruction required. Could you help me or share MQB doc in German ? Thanks a lot in advance.
|
|