Post by sabi on Dec 8, 2020 14:57:08 GMT
history 1.txt (121.2 KB)Hello i bought a OBDeleven and im happy with it working fine.
I wanted to activate the traffic sign recognition.
hardware 5q0980653
sw 5q0980653G
ODX EV_MFKBoschAU370
I used the below coding. And many other ways too....
The system is recognising the signs so that part is working fine.
Here is the problem:
Sometimes the camera reading the speed signs from the back of the trucks that is not a big problem to me
After a while i getting an error message TRAFFIC SIGN RECOGNITION RESTRICTED....
The camera picking up signs show it on the dashboard until the next sign is detected even if i going on the road with different speed limit (not shown with sign)
But somehow the camera and the navigation not working together.
After the camera picked up a sign show it on the dashboard it will stay even the data in the navi is changed.
or
When i'm on the highway and the camera picking up a let say 100km/h sign and there is no other signs it will show 100Km/h for a long period
or
I drive in the village and inside a village let say a 30km/h sign (normally 50km/h) after i left the village it will show 30km/h sigh even the navi shows 90km/h speed limit
I had a Nissan before with navi and sign recognition camera but there the two device work with together if the navi changed the speed limit after i left the village the dashboard show different information too
I tried coding with many different way but the result is the same i will have a sign recognition but limited accuracy...I attached the current codes i know this is different but i tried with many other coding to fix this problem
Can someone give an idei what is the problem?
Thank You!
Traffic Sign Assist Activation
Select Control unit 5F (Information Electrical)
Adaptation
Select channel (63) vehicle function list BAP traffic_sign_recognition_0x21
Değer=Active
Select channel (151) vehicle menu operation-menu_display_road_sign_identification
Değer=Active
Select channel (153) vehicle menu operation-menu_display_road_sign_identification_over_threshold_high
Değer=Active
Control unit A5 (front / advance camera)
Security access
Access Code 20103
Control unit Long Coding
Byte 1
Bit 0 Activate - "01 Traffic Sign Recognition (FTE) active"
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 5
Bit 2 Aktivate
Control unit A5 (front / advance camera)
Adaptation
Select : channel numbers indicate end of speed limit
Importance to actively invest Show Valid suffix
View Channel Valid suffix
Corresponding value adjust default: 00100111
I wanted to activate the traffic sign recognition.
hardware 5q0980653
sw 5q0980653G
ODX EV_MFKBoschAU370
I used the below coding. And many other ways too....
The system is recognising the signs so that part is working fine.
Here is the problem:
Sometimes the camera reading the speed signs from the back of the trucks that is not a big problem to me
After a while i getting an error message TRAFFIC SIGN RECOGNITION RESTRICTED....
The camera picking up signs show it on the dashboard until the next sign is detected even if i going on the road with different speed limit (not shown with sign)
But somehow the camera and the navigation not working together.
After the camera picked up a sign show it on the dashboard it will stay even the data in the navi is changed.
or
When i'm on the highway and the camera picking up a let say 100km/h sign and there is no other signs it will show 100Km/h for a long period
or
I drive in the village and inside a village let say a 30km/h sign (normally 50km/h) after i left the village it will show 30km/h sigh even the navi shows 90km/h speed limit
I had a Nissan before with navi and sign recognition camera but there the two device work with together if the navi changed the speed limit after i left the village the dashboard show different information too
I tried coding with many different way but the result is the same i will have a sign recognition but limited accuracy...I attached the current codes i know this is different but i tried with many other coding to fix this problem
Can someone give an idei what is the problem?
Thank You!
Traffic Sign Assist Activation
Select Control unit 5F (Information Electrical)
Adaptation
Select channel (63) vehicle function list BAP traffic_sign_recognition_0x21
Değer=Active
Select channel (151) vehicle menu operation-menu_display_road_sign_identification
Değer=Active
Select channel (153) vehicle menu operation-menu_display_road_sign_identification_over_threshold_high
Değer=Active
Control unit A5 (front / advance camera)
Security access
Access Code 20103
Control unit Long Coding
Byte 1
Bit 0 Activate - "01 Traffic Sign Recognition (FTE) active"
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 5
Bit 2 Aktivate
Control unit A5 (front / advance camera)
Adaptation
Select : channel numbers indicate end of speed limit
Importance to actively invest Show Valid suffix
View Channel Valid suffix
Corresponding value adjust default: 00100111