owned
New Member
Posts: 3
|
Post by owned on Apr 14, 2021 18:30:08 GMT
Hi. This weekend I’d like to get a trailer control module coded for my 2018 Q5 2.0T. All hardware has been installed and just awaiting final coding. In prep for this, can anyone point me to where I can find relevant areas to code? I’ve found threads online that point to a log for an individual that coded a 2018 SQ5, but not exactly the 2.0T. Just want to ensure I have all the relevant coding correct.
I’m a newbie with OBDeleven, so any advice is something new for me.
-Brad
Pittsburgh, PA
|
|
owned
New Member
Posts: 3
|
Post by owned on Apr 19, 2021 21:50:43 GMT
Wow. Lots of views and no replies.
Does anyone have a full backup which shows the proper trailer coding for use in the USA?
Really would like to get this one installed! I have all physical hardware installed. Just need coding to get it done!
|
|
|
Post by sarah1331 on Apr 26, 2021 21:38:07 GMT
|
|
|
Post by Dennisvl on Apr 30, 2021 10:59:49 GMT
I was doing the same thing but ran on some problems that i have solved after some resurge..
Module 6C camera....search for equipment_ahk stands for anhangerkoplung and change to installed
Module A5 front sensors
This was tricky because i did this while i had the engine running.....but than it dont work! So don't let the engine run.
Search for AAG and change this to coded
Than with all the others from above worked for us....
|
|
|
Post by thenguyen on Mar 16, 2022 3:18:30 GMT
Hi, im new in forum. I have obdeleven pro and i need help to coding the trailer module please. Can someone help me with the coding please, my car is q5 2018
|
|