|
Post by mrmoron on May 7, 2021 5:04:39 GMT
Hey all, hopefully my problem can be resolved. Recently took my car into a ''European specialist'' in my area as im having rev pulse issue when driving, about 200-300rpm just when cruising. They concluded that it ''might'' be the clutch and that if they're to remove my gearbox they want to do a mechatronic rebuild aswell as a full teardown of gearbox, quoting upwards of $5000-$6000 with no change. I purchased OBD device to see if I can atleast try a dsg basic setting and let it relearn in hopes maybe it'll resolve itself. But the app using android device keeps giving error 22 when trying to do any of the basic settings. So I just went through all and see which ones tried to work and which didn't. All that did start were soon ended for safety reasons. Why would I get these errors and which Basic setting will reset my gearbox to relearn.
Thanks in advance.
|
|
|
Post by bonez333 on Jul 21, 2021 12:54:42 GMT
Hey mate. Unsure if you figured this out yet but I had the exact same issues as you getting errors while doing basic settings
And I found this out
You have to clear all fault codes first and have engine warmed up Then go into transmission basic settings and do it in this order
(Can’t remember exactly what they are called but you’ll find them Switch on ignition but dont start engine Clear/reset counter for start stop procedure (this one failed for me but had to do it first for other two to work)
Then do Clutch valve Calibration Then lastly do Distance sensor Calibration
Then switch of ignition and leave it for 10 seconds then start up and clear codes again then go for a drive that should do it
Wish they would do an app for this procedure like they do for the Audi s3 and golf r
|
|
|
Post by hauntedfx on Aug 9, 2022 15:39:21 GMT
Hi have the same problem. Function not available can’t get pas this step
|
|