|
Post by ramazan on Jul 8, 2021 5:45:39 GMT
Hi,
Did anyone fit doorlights on their Arteon? I did find the setting and activated but need to know which pins i need on the door module. Is it like the Golf MK7: postive wire to terminal 2 of the electric window motor cable block and terminal 5 of the door lock module connector at the rear top edge of the door?
|
|
|
Post by ramazan on Jul 8, 2021 5:49:55 GMT
To be clear i have lights in the front doors. Looking for info for the rear doors.
|
|
|
Post by ramazan on Jul 8, 2021 5:52:25 GMT
I also found this for the Arteon SE:
16 pin black connector that is plugged into the rear door control module, pin 12 is ‘+’ and pin 13 is ‘-‘.
Think it's this one.
|
|
|
Post by ramazan on Jul 17, 2021 13:47:17 GMT
I also found this for the Arteon SE: 16 pin black connector that is plugged into the rear door control module, pin 12 is ‘+’ and pin 13 is ‘-‘. Think it's this one. I can confirm that these are the correct pintm so if you want puddle lights in the rear door pin 12 is + and pin 13 is -. 12 is empty and 13 is already accupied. Just hook it up to 13 and your good. Programm it with OBD and there you go.
|
|