|
Post by guitartech on Feb 28, 2017 15:18:04 GMT
Hi all I bought the Pro version last week, and have had some fun up until now modifying my Leon FR. Great software, and much cheaper than VAG-COM :-)
Everything works fine, except that the needle sweep doesn't always activate when I turn the ignition on. So: I unlock the car, get in, and turn on the ignition to start. Mostly the needle sweep works, but sometimes not. If I then lock the car with the key from inside the car, and then unlock it again, also from inside the car, it works. Wtf? Is there a time limit betwween unlocking and turning the ignition on? Or is there a parameter in the OBD menu that I can modiify to stop this happening?
|
|
|
Post by Daniel (Germany) on Feb 28, 2017 17:12:09 GMT
Normal needle sweep works when you open car and turn on ignition. When you turn on ignition a second time it does not work. It works next time when you get out (open/close driver door) lock and unlock car, then ignition on ot works next time. This is normal and on my friends leon exactly the same.
|
|
|
Post by guitartech on Feb 28, 2017 18:45:56 GMT
Of course I know that it only works once after unlocking, that's not what I meant. I meant that it sometimes doesn't work when I open the car normally and turn the ignition on for the first time after unlocking the car so that I can drive away normally.
|
|