|
|
Post by Benjo on Mar 11, 2017 20:55:45 GMT
Hello I got an audi a3 8v 2.0 TDI in Sweden and right now When I Have the daytime lights running both front and back are active.
I bought the App so the Tail lights are off during Day light But it still dont work.
I have bought the app several Times But it still dont work...
|
|
ekkar
New Member
Posts: 41
|
Post by ekkar on Sept 12, 2019 17:02:38 GMT
Its apparently hardwired on these...
|
|
|
|
Post by dv52 (Australia) on Sept 13, 2019 8:08:34 GMT
^^^^ ekkar might be correct (about hard wiring), but an easy way to check if Scandinavian DRLs are coded into the car is like this:
1. Select Central electrics (module @ address hex09)
2. Select security access
3. Enter the magic number 31347
4. Select Adaptation
5. Search for Außenlicht_Front (or just Front) then select
6. Select Tagfahrlicht-Dauerfahrlicht aktiviert zusartzlich Standlicht
7. if Scandanavian DRLs is factory set, the value for this channel will be "active". If so, change to "not active"
8. Remember to tap the green tick to confirm change.
|
|
|
|
Post by m2tthewpt on May 5, 2020 0:28:41 GMT
Is there a way for this to work without the license plate lights staying on with it?
|
|
|
|
Post by dv52 (Australia) on May 9, 2020 21:45:03 GMT
Is there a way for this to work without the license plate lights staying on with it? yes there is - try this: Make the changes that I have written above, and
Leuchte25KZL HA59-Lichtfunktion C 25 > Tagfahrlicht
Don
|
|
