|
Post by millsey79 on Nov 12, 2022 17:39:36 GMT
I'm encountering a few issues with my A3 MY2022 software version 3691, I've adapted the relevant control unit to activate the welcome sound when the ignition is turned on and Audi heartbeat when leaving the vehicle.
My issue is that the welcome sound plays ok everytime but I cannot get the Audi heartbeat to play when exiting. It must be the newer software versions that have the issue as others with older versions work ok.
Any suggestions?
|
|
|
Post by demirkapi on Nov 20, 2022 21:41:53 GMT
5F - Multimedia
Adaptation function_configuration_sound > vehicle_readiness_sound : activated unction_configuration_sound > vehicle_leaving_sound : activated
|
|
|
Post by millsey79 on Nov 21, 2022 8:24:26 GMT
Hi,
Thanks but I know the adaption but I was asking if anyone has figured out why the heartbeat does not sound on newer software versions
|
|
|
Post by demirkapi on Nov 21, 2022 8:48:56 GMT
As I know it works with 3454, 3611, 3620 versions.
I do not have any experience with the newer ones.
|
|
|
Post by millsey79 on Nov 21, 2022 9:26:46 GMT
Thanks for the reply I think my software version is 3691 and the heartbeat doesn't sound but the welcome sound does, a little odd that both don't work
|
|
|
Post by tfsie45 on Jan 22, 2023 21:50:26 GMT
Hi,
i coded it last day with Version 3801 by the help of this Video:
Bye
|
|
|
Post by millsey79 on Feb 9, 2023 16:00:15 GMT
I appreciate the reposting of the helpful video but the heartbeat definitely does NOT work on version 3691.
Any reasons why?
|
|
|
Post by tfsie45 on Feb 10, 2023 5:15:02 GMT
My car is on Software Version 3801 and the Audi Heartbeat works but I have no welcome sound. Coded after the video above!
|
|
mat
Closed beta tester
S3 Vorsprung 8Y 2023
Posts: 113
|
Post by mat on Oct 23, 2023 13:15:54 GMT
Likewise, Heartbeat, but no welcome sound.
I think it's down to the data-sets not being loaded - if anyone who has the welcome sound working, could you go into Module 5f, Advanced Identification, then post what's showing in "Data Set Names" ?
|
|
|
Post by gbernard on Oct 24, 2023 4:41:17 GMT
same with me, SW 3801, heartbeat on exit, no welcome sound though. Followed all the instructions and checked them each time, still no joy.
|
|
|
Post by diavolos3 on Dec 19, 2023 15:34:23 GMT
Same here on SW 3695, heartbeat, but no welcome sound. Only see the menu
|
|
|
Post by mirceamn on Feb 25, 2024 12:50:46 GMT
Hello. I managed to activate the welcome sound and the heartbeat leaving sound with these settings on software 3801: 5F - Multimedia Adaptation function_configuration_audio > welcome_sound : on function_configuration_sound > vehicle_readiness_sound : activated function_configuration_sound > vehicle_leaving_sound : activated
|
|
sxm
New Member
Posts: 4
|
Post by sxm on Feb 27, 2024 16:22:26 GMT
It doesn't work with version 3843. Does anyone know if this is possible? Leaving Sound works but Welcome Sound displayed in Settings but not work.
|
|
delta
New Member
Posts: 3
|
Post by delta on Mar 8, 2024 16:21:16 GMT
Welcome sound doesn't work for me either Pushing the request of mat
mirceamn if both sounds do work, maybe you could help us others who can't hear the lovely welcome sound (yet)
|
|
|
Post by mirceamn on Mar 10, 2024 8:29:35 GMT
|
|
delta
New Member
Posts: 3
|
Post by delta on Mar 11, 2024 23:28:34 GMT
Thank you for the datasets names mirceamn - unfortunately I don't see a difference So something else is missing... You can simply do a full or control unit backup, then go into history and send it to your email. Then you don't need todo screenshots
|
|