|
Post by mikmak87 on Dec 13, 2022 15:45:30 GMT
Hello, newbie here with no knowledge of long coding. I replaced my battery and I'm trying to adapt it but in my gateway 19 I do not have adaptation like I see in all the tutorials. I do have long adaptation. Is there an easy to to do the long coding with out me messing something up? Or is there a way to get the adaptation bar to show?
|
|
|
Post by mikmak87 on Dec 27, 2022 18:21:46 GMT
Bump! really need some help on this please!
|
|
|
Post by whataboutthis on Feb 5, 2023 22:53:03 GMT
Just to confirm when you log on to car. Select Control Unit 19 Gateway Select Adaptation (not long coding) Select Channel 4 You should then get a screen like this
in the Enter new value section you type 3 digit value which is the battery amp value, space, battery manufacturer code (or just type in the same as now) then space then the serial number, to keep it easy just add one to the existing code and save.
If you have Long Adaptation let me know and i will dig out the required process for that setup (yes there are 3 different Control Unit Protocols that have different processes.)
|
|
|
Post by magnushe on Feb 5, 2024 10:37:59 GMT
Lifting an old thread here! I’m trying to do the same (to an 2007) but only get a function not available notice when opening the adaptation menu. Anyone got any ideas?
|
|