|
|
Post by kcurpen on Apr 19, 2023 13:51:34 GMT
Hi, Anybody has retrofitted the antitheft alarm system. I have installed the hardwares as follows
-Interior monitoring sensors + Inclination sender
-Siren
-Antitheft deactivation switch (on driver's door)
I now need only the codings to enable the alarm system, would be grateful if you can assist.
Thank you.
|
|
|
|
Post by andreabafile on May 20, 2023 21:47:36 GMT
Hi, yes did it on A5 B9.
The coding it's easy, you do everything on the controller 46 - comfort:
LONG CODING
- Theft Alarm System: installed
- Interior Monitor sensor: installed
- Tilt sensor. Installed
- Theft Alarm System with simple horn: Sounder Installed
- Theft alarm tamper alarm: Ten tamper alarm
- Horn acknowledgement: active
- Warning tone open alarm contact: active
ADAPTATIONS:
Sounder settings -> here you choose, I just recommend you select "frequency modulated" as sound.
You can skip the installation of the deactivation switch if you want, is not essential.
|
|
|
|
Post by kcurpen on Aug 15, 2023 11:06:35 GMT
Hi Thanks for your reply, Will give this a try.
Have installed and wired the antitheft module, Siren and Deactivation switch.
|
|
|
|
Post by kcurpen on Aug 15, 2023 11:17:15 GMT
To enable the "Tone when Locking" option in the MMI under Car / Vehicle Settings / Central Locking
Try this
Controller 46
Long coding
for Byte 4
Select/Tick "Bit 6"
|
|
|
|
Post by peppecleo on Sept 9, 2023 0:26:59 GMT
hi, do you have the serial number of the tilt transmitter?
|
|
|
|
Post by peppecleo on Sept 9, 2023 13:29:12 GMT
Hi, Anybody has retrofitted the antitheft alarm system. I have installed the hardwares as follows -Interior monitoring sensors + Inclination sender -Siren -Antitheft deactivation switch (on driver's door) I now need only the codings to enable the alarm system, would be grateful if you can assist. Thank you. |
|
|
|
Post by peppecleo on Sept 9, 2023 13:29:24 GMT
hi, do you have the code for the Tilt Transmitter
|
|
|
|
Post by kcurpen on Sept 22, 2023 4:14:22 GMT
Hi here are the codings
LONG CODING
- Theft Alarm System: installed
- Interior Monitor sensor: installed
- Tilt sensor. Installed
- Theft Alarm System with simple horn: Sounder Installed
- Theft alarm tamper alarm: Ten tamper alarm
- Horn acknowledgement: active
- Warning tone open alarm contact: active
you notice, coding in red is for the tilt sensor. don't think there are other codings specific for the tilt sensor
|
|
|
|
Post by kcurpen on Jul 15, 2024 7:06:34 GMT
Hi Sorry for the late reply. Bought the Switch, sensor and siren on Ebay. Attached are the wiring diagrams Part numbers as follows: 4M0962109- Switch (on Driver's door) 5Q0951605A-Siren 5Q0951177- Tilt & Int monitoring sensor Attachments:
|
|
