mrjj
New Member
Posts: 5
|
Post by mrjj on Jun 19, 2023 10:17:11 GMT
I have bought from sbad yard 2nd hand towbar and control box, both VW original from a ID4. Now classic long coding is somewhat done and 69 trailer activated in CAN Gateway. There is still 3 problems, front radar, traffic sign recognation and lane change are giving errors and are not working. Towbar works fine
Have anyone done the same and could help to locate what is missing ? Dealer won´t do it claiming they only code in brand new towbar kits which comes with a special conde which is used to enter data to factory tool.
There is avalaible dummy coding dongles so it is shouldn´t be that difficult to activate trailer in control units, it shouldn´t need the SFD as neither the dongle can handle that.
I went thru all long coding fields both with OBD11 and VCDS. There could be some adaptation I need to do, but as many of them are not interpreted I couldn´t find any suitable. Not all long coding filelds are interpreted either.
|
|
vzinic
Closed beta tester
Posts: 9
|
Post by vzinic on Jun 21, 2023 7:16:57 GMT
Can you write what you coded?
Do you use this modul: 5H2907383
I need for VW Id5 it should be the same.
|
|
mrjj
New Member
Posts: 5
|
Post by mrjj on Jun 30, 2023 6:03:00 GMT
|
|
vzinic
Closed beta tester
Posts: 9
|
Post by vzinic on Jun 30, 2023 21:15:50 GMT
Thanks
Are you resolve 3 problems, front radar, traffic sign recognation and lane change are giving errors and are not working.
|
|
|
Post by blizzard60 on Nov 18, 2023 23:56:10 GMT
Did anyone figure this out. I am in the same boat, with the errors in three control modules and ACC/Travel Assist, Lane Change and Road Sign not working. Weirdly the hitch doesn’t come down when the switch is pulled either. Images don’t work for me (get a “forbidden” message when I go to imgtr.ee)
|
|
|
Post by blizzard60 on Nov 19, 2023 5:01:39 GMT
In case anyone needs to do this, I cleared the ACC/Lane Assist errors by going to A5 and in long coding found “aag” and set it to “coded”. Then into 03 and adaptation and found an entry for “trailer stabilization” or something like that and I activated it.
|
|