Gateway coding

[DaanA4]

I have mounted a camera and it works fine. 
I used these instructions and coding: munteanubogdan.com/english/retrofit-reversing-camera-audi-a4-b9/

As he already writes: the only error which will still remain is the one with „U112400 additional equipment installed” on Gateway module. It does not affect the car in any way.

When i make a scan with obdeleven i found:  A5 Driver asstistance is YELLOW



How can I add this module to the Gateway install list with obdeleven because I don't see it in the list?

[whataboutthis]

If you have android you can use the autocode gateway list (set to show in the settings menu) this should auto load any control units you have not added in, if you are IOS you cant do that as they have not built it for you.

To add it manually check out the OBD11 Support site support.obdeleven.com/en/?q=gateway+coding there will be two items one for android and one for IOS.

[DaanA4]

Thanks!
I use iOS, coding is done now.
I can clear the gateway fault.

Everything is green.

[alix77]

Sept 11, 2023 12:32:51 GMT whataboutthis said:

If you have android you can use the autocode gateway list (set to show in the settings menu) this should auto load any control units you have not added in, if you are IOS you cant do that as they have not built it for you.

To add it manually check out the OBD11 Support site support.obdeleven.com/en/?q=gateway+coding there will be two items one for android and one for IOS.

I know this might be an old post but your advice helped me a lot. 
I was having troubles with my windshield wipers,Xenon lights and a bunch of wrong coded stuff.
Then I ACTIVATED and used OBD11 AUTOCODE, and MODULE 19 works with no issues anymore. No more Error codes and everything is in order.
Thanks man,you made my day!