Can't enable fatigue detection

[yankarinrg]

Hello,
I tried to activate the fatigue detection system on my Fabia III Colour Edition hatch manufactured on 18/04/2016 using the following code:

(176)-Car_Function_Adaptations_Gen2-menu_display_weariness_recognition - activated
(178)-Car_Function_Adaptations_Gen2-menu_display_weariness_recognition_over_threshold_ high - activated
(65)-Car_Function_List_BAP_Gen2-weariness_rcognition_0x22 - activated
(66)-Car_Function_List_BAP_Gen2-weariness_rcognition_0x22_msg_bus - Databus Infotainment

But when I try to enable the function in the infotainment it says "Function not available at moment".
It should be enabled since it's on the manual.
Any advice?

Thanks:)

[massimo23]

Hi you need to check if the fatigue detection was activated when you bought the car. If you input your vin through a decoder with vag codes just look up EM0 and EM1. If you have EM0 then the driver alert was not factory enabled if EM1 then it was enabled. I dont have it factory enabled and when i set all the values as you mentioned I get the same error. It is possible that you could get the fatigue detection active for a price at Vw/Skoda.