|
|
Post by Abi on Aug 18, 2017 17:09:42 GMT
How to code for rear view camera retro fit
|
|
|
|
Post by vwjap on Aug 21, 2017 20:18:28 GMT
5F
long coding
Byte 19
change Bit 4 to a 1
As mine is different I can't try it,
|
|
|
|
Post by vwjap on Aug 31, 2017 17:04:17 GMT
Ok coding for mine was (might be worth going in and checking you actually have the same modules/options tho)
Camera system rear view
Long coding
Then select the long code up in the top right corner
Scroll along using the green arrows at the bottom of the screen till Byte 7 -parking mode (quer) select the box
Press and hold the green tick
Infotainment
long code
Scroll down to
byte_19_rear_view_low
Change to activated
Then reset the discover pro by pressing and holding the on/off button until the screen goes off then back on again saying welcome to Volkswagen
Hope this helps
|
|
dany
Closed beta tester
Posts: 4
|
Post by dany on Apr 14, 2018 12:56:22 GMT
I do not have a park assist but I have a back camera. not having the park assist the green lines do not move there any way to make them move when I turn the steering wheel. thank you  |
|
|
|
Post by andreamap on Apr 18, 2018 19:13:36 GMT
Guys, I have the same question of dany, I have reverse camera fitted OEM and I'd like to know how to add the moving guidelines when I steer. Anybody can help us? |
|
|
|
Post by vwjap on Apr 18, 2018 19:35:23 GMT
Looking at the pic the lines on that are different colours, the ones that move on mine are yellow, just wondering if the lines are fixed and don’t move
|
|
|
|
Post by andreamap on Apr 18, 2018 19:47:13 GMT
vwjap the line on mine are green and fixed, so they does not move. Why VW did 2 variants for the reverse camera? With OBD Eleven, can be activated the moving lines?
|
|
|
|
Post by vwjap on Apr 18, 2018 20:05:30 GMT
As I understand you have the normal reverse camera with either no lines or static lines or the high line camera that has moving lines, these are in the camera and not programmable (the high line camera has other uses as well like in trailer assist where it measures the angle of the hitch)
|
|
|
|
Post by daveeu on May 17, 2018 5:42:35 GMT
My 7.5 FL has the pro pack with all camera's standard .
The lines also do not ''bend'' when I steer , nor that I have a ''beep'' like my old Polo had ( also wit ha camera but it beeped also according to the distance from )
|
|
