S3 8y dcc calibration

[maurice93]

Does anyone have a idea about the right procedure of dcc recalibration for a s3 8Y
After lowering

because the procedure from below doesn’t work it’s definitely different then the golf 7.5 R for example :

Go to Control Module 14 - Adaptive Suspension
Enter security code 20103.

Go to Adaptations

Select “Adapting with deflected wheels”
Take note of the values, as they should change later.

Don’t change anything, instead back out.

Enter Basic Settings

Select “Adapting with deflected wheels”
Slide to Start or Press & hold Green tick to Start.
It should run for a second and then say something like basic setting ended.

[arandax]

Did it mine at the dealer, I wasn't able to do it with obd11.

It's a night/day difference though.

I definitely suggest it

[diavolos3]

This can only be done with ODIS (was not able to do it with VCDS of OBD11). Just did mine and can say its a big difference so calibration is a must after lowering imo. Otherwise the car is really bouncy in dynamic.

[hawless]

Dec 30, 2023 17:50:33 GMT diavolos3 said:

This can only be done with ODIS (was not able to do it with VCDS of OBD11). Just did mine and can say its a big difference so calibration is a must after lowering imo. Otherwise the car is really bouncy in dynamic.

I have odis but cannot find the place where to do it. Can you walk me through ?

[diavolos3]

I don't know, I'm sorry. I payed somebody with ODIS to do it for me. But you need a lift to do this. What you basically do is raise the car with the wheels fully of the ground. Then pres a button in ODIS to recalibrate and then drop the car back fully on the ground en pres the button again, the the system basically has 0-100% again.