|
Post by helijimbo on Dec 26, 2023 10:37:06 GMT
Hi people.
Some advice please.
I've just managed to fix my wing mirror indicator light not working which I'm chuffed about as I needed to reprogram the door module, so I copied the data from the passenger door to the non working driver's side and voila, I now have a turn signal on the wing mirror.
What I noticed was that the first time I opened the door module, it says coding, then the next time, it moves to long coding.
I always get an error 'function not available' when trying long coding (access code success and set to VW coding) yet I managed to fix it by coding (before it reverts to long coding).
I hope I'm explaining myself properly?
So the question is, why does it change from coding to long coding?
Why will it not write with long coding but it will with coding?
Sorry to sound confusing here.
VW Golf GtI mk6 with pro version.
|
|
odc00
New Member
Posts: 1
|
Post by odc00 on Jan 4, 2024 21:31:03 GMT
Hi there. I’m having the same issue with coding not appearing anymore, and only the slightly daunting long coding hexadecimal option. I’m on the navigation module. Gen 1 R8
|
|