coding lane assist problems

[touimi]

hello everyone.

please i have a problem with lane assist. i install it im my car mk7.5 2018 i have acc but i install lane assist just with can gateway i don't connect it with acc. now brothers i have this problems.

im trying to do basic setting but always give me red errors in basig setting

i don't know whey. please i need help


Thursday,18,January,2024,16:41:02:16365
VCDS Version: Release 23.11.0 Running on Windows 10 x64
www.Ross-Tech.com

Address A5: Frt Sens. Drv. Assist Labels: NONE
Control Module Part Number: 2QD 980 653 A HW: 2Q0 980 653
Component and/or Version: MQB MFK 3.0 H16 1401
Software Coding: 00000188104A0000A08F00000800000000238000000000000000000000000000
Work Shop Code:
ASAM Dataset: EV_MFK3ValeoMQB 007042 (VW37)
ROD: EV_MFK3ValeoMQB_007_VW27.rod
VCID: 47CB5B015F2E0AE2AE9-8012
Fault Codes have been Erased

7 Faults Found:
13762560 - Component protection
U1114 00 [00001001] - GFA key
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 40
Mileage: 209647 km
Date: 2024.01.18
Time: 16:40:23

13828096 - Component protection
U1115 00 [00001001] - No basic setting for SHE key
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 40
Mileage: 209647 km
Date: 2024.01.18
Time: 16:40:23

13697024 - Component Protection
U1100 00 [00001001] - No Basic Setting
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 40
Mileage: 209647 km
Date: 2024.01.18
Time: 16:40:23

15361024 - Component Protection
U1101 00 [00001001] - Active
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 40
Mileage: 209647 km
Date: 2024.01.18
Time: 16:40:23

Theft_protection_error_counter: 34

0518 - invalid data record
B2005 00 [00001001] - -
[Dataset_corrupt_failure]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 3
Fault Frequency: 1
Reset counter: 40
Mileage: 209647 km
Date: 2024.01.18
Time: 16:40:22

0768 - No Basic Setting
B2010 00 [00001001] - -
[Calibration_VIN_mismatch]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 40
Mileage: 209647 km
Date: 2024.01.18
Time: 16:40:22

0660 - No Basic Setting
B2010 00 [00001001] - -
[Initial_calibration_missing]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 40
Mileage: 209647 km
Date: 2024.01.18
Time: 16:40:22

[dv52 (Australia)]

hmm... it won't be possible to undertake ANY basic setting procedures until you delete the other errors. Component Protection errors can ONLY be deleted (officially) by a dealer, or by an independent workshop that has access to VW's FAZIT servers.

Don

[touimi]

we have to delete the security before? if yes. can i delete it with odis?
because im buying it new from aliexpress. 2QD. it normal?

[newty]

Wow! MFK3 in a Golf? Thats somewhat advanced. How does that even fit without adapters?

TLDR: Without extensive knowledge and available tools an MFK3 is impossible in the Golf 7. Head for a MFK2 instead.

Yes, Component Protection removed by Odis online is a mandatory prerequisite. Also you will need a new Gateway which supports A5 Component Protection.

For Traffic Sign Recognition a SWaP Enablement is needed.

I am not sure if the SubCan for Fusion is working correctly without also swapping the ACC.

Get a 3Q? 980 654 camera. Do not buy a used one. Most are defective. That one is ment for the Golf 7 and has less hassles and can be realistically implemented. Only calibration and datasets (again, ODIS or VCP needed) are needed

[dv52 (Australia)]

touimi : YES to first question (albeit, I guess you could hack the module - but I don't know how to do this)
No to second question -ODIS is not enough. As I said, deleting CP needs access to VW's central servers (it's called FAZIT)

Don

[touimi]

yes it is MFK3 in mk7.5 2018. he told me will work fine with any problems. just we have to remove the cp. it is not possible to do this or what?
and i have the acc. but the seller not send the wiring for acc and i don't know where can i connect the two cable in the camera. because the wiring position it not like 3Q0

[newty]

Since this is a OBD11 support forum, I think we all agree that this not a retrofit which can be done with OBD11 at all.

I pointed out that even with adapted component protection (which will likely fail in a Golf the camera is still needs parameters (which were never released for the golf), calibration and swap.

That's all I can contribute