|
Post by astonm on Feb 19, 2024 18:06:38 GMT
Witam. How to code a high-top camera for Golf7 so that it is possible to run the image from the cameras using the parktronic button? Coding in module 6c>long coding>byte 04>bit (Optical indication of parking control) causes error U112100.Turning off the cameras in the 5f>car list bap gen2>vps_0x0B function causes Parktronic to work properly on the screen. The image from the PDC with the reversing camera turned on can only be seen when reverse gear is engaged.
5f long coding : 02-73-10-01_FF-00-00-00-51-11-00-01-00-08-0A-00-1F-05-06-C4-01-20-01-00-CF
6c long coding : 01-73-10-01-C0-00-20-17-40-00-40
Moduł 76 long coding : 00-31-15-10-01
Is the pdc module too old for this unit? The car is from 2013 Mib1 replaced with MiB2.
|
|
|
Post by mathi9020010 on Feb 23, 2024 11:11:18 GMT
I assume your gateway Software is too old and needs to be updated to at least AJ. Then the camera activation via pdc button is possible "again". Ive got similiar setup as yours. MIB 2.5 and OEM Camera High. The PDC Modules software doesnt matter.
|
|
|
Post by astonm on Mar 1, 2024 20:53:48 GMT
Thank you
|
|