Post by audifin on Apr 11, 2024 6:52:48 GMT
Audi A4 40TDI Quattro 2019
B9,5 facelift
Has anyone succeeded calibrated
Steering angle sensor with Obdeleven?
From Control Unit 16 Steering Column?
Earlier i tried to calibrate and manage to mess up system.
From Control Unit 44 Steering assistance:
Resetting of all adaptation values.
Resetting of learned values for steering assistance
Resetting of all adaptations
After these, dashboard filled up: ETC, ABS, Pre Sense.
Luckily i manage to restore settings from backup and put long coding back as it was.
After that faults gone.
Only thing is Steering Fault.
How it properly Calibrated?
From Steering Column?:
Steering Angle Sensor, Reset Zero Calibration
Steering Angle Sensor, Carry out Zero Calibration
Steering Angle Sensor, Zero Calibration W/Steer. Wheel Scales?
I found instructions from google, done that and
Steering faiult is gone, but after Ign. Off and door lock.
Then Ign on: Steering Fault is on?
What is properly way to do calibration??
B9,5 facelift
Has anyone succeeded calibrated
Steering angle sensor with Obdeleven?
From Control Unit 16 Steering Column?
Earlier i tried to calibrate and manage to mess up system.
From Control Unit 44 Steering assistance:
Resetting of all adaptation values.
Resetting of learned values for steering assistance
Resetting of all adaptations
After these, dashboard filled up: ETC, ABS, Pre Sense.
Luckily i manage to restore settings from backup and put long coding back as it was.
After that faults gone.
Only thing is Steering Fault.
How it properly Calibrated?
From Steering Column?:
Steering Angle Sensor, Reset Zero Calibration
Steering Angle Sensor, Carry out Zero Calibration
Steering Angle Sensor, Zero Calibration W/Steer. Wheel Scales?
I found instructions from google, done that and
Steering faiult is gone, but after Ign. Off and door lock.
Then Ign on: Steering Fault is on?
What is properly way to do calibration??