|
Post by mikemigk on Apr 16, 2024 5:30:35 GMT
Hello guys My name is Mike migk. . I search to many hours at Google but couldn’t find anything to resolve my problem. I have an Audi q2 purchase 11/21 . It has only speed limit and after lot research I see has the hardware -radar to accept acc . So I find a guy and he make the code and add acc. I change stalk and after that he make the coding. The acc works great , the radar read distance and all . The problem is that at cluster can’t see the speed and distance at all . I have speed limit too on. When choose speed limit I can see the speed at cluster When I choose acc nothing shows. The acc works I see it on the road but can’t see speed and distance. I have vas 5054 . Can anyone pls help me ? My name at telegram is @mikemigkos Pls if y know anything pls help me , road acc with blind speed and distance Thanks for any answer thanks If anyone need help can sent me at telegram I will help . If want add acc Audi q2
|
|
|
Post by dv52 (Australia) on Apr 16, 2024 21:40:08 GMT
Mike: Hi and thanks for the Private Message - but as I request in the signature part of ALL my posts, questions about car-repair properly belong in the forum (not in Private Message)! Hence my response here!!
As for this car - other than it being an MY21 Audi Q2- nothing else is known. So, we don't know how this car was built, what additional equipment was installed into the vehicle as part of the ACC retrofit, or how the modules are coded. As you will appreciate - ain't nothing that can be done on a forum without this basic information!
Because you have posted your request here I assume that you have an active OBD11 account. If so, please post-up a FULL , unedited SCAN for this vehicle, so we can see how it was built and how it is coded. To be clear, "unedited" means NO changes and you need to enable Freeze-frame against your OBD11 account before creating the SCAN report.
Don
|
|