Post by crotom on Apr 16, 2024 10:12:06 GMT
I have a questions about Traffic-sign recognition and Lane assist. I have adaptive cruise control and auto high beam on my mk7.5. I have navigation system with maps on MIB2.
Can someone post me exact instructions for Traffic-sign recognition, I found some instructions on internet but its for 5Q0 camera, can someone tel me will that work on 3Q0 and what is the difference?
I have:
Can someone post me exact instructions for Traffic-sign recognition, I found some instructions on internet but its for 5Q0 camera, can someone tel me will that work on 3Q0 and what is the difference?
I have:
A5:
HW: 3Q0980654A
SW: 3Q0980654HDo i need to activate lane assist, would Traffic-sign recognition work without lane assist?
What I found:
1.Procedure:
Module: 5F (Information electronics)
Adaptation → Channel: Car Function List BAP Gen2 - traffic sign recognition 0x21 → active
Adaptation → Channel: Car Function List BAP Gen2 - traffic sign recognition 0x21 msg bus → Databus extended
Adaptation → Channel: Car Function Adaptations Gen2 - menu display road sign identification → active
Adaptation → Channel: Car Function Adaptations Gen2 - menu display road sign identification over threshold high → active
Coding → Long Coding → Byte: 24 → Bit: 6 → active
Module: A5 (Front Sensors Driver Assistance System)
Security Access → Code: 20103
Coding → Long Coding → Byte: 01 → Bit: 0 → active
Adaptation → Channel: Road Sign Detection Fusion Mode → Road sign fusion
Adaptation → Channel: Display end of speed limit symbol → active
Adaptation → Channel: Valid additional characters → 00100111
Module: 17 (Instruments Cluster)
Coding → Long Coding → Byte: 05 → Bit: 2 → active
Module: 5F (Information electronics)
Adaptation → Channel: Car Function List BAP Gen2 - traffic sign recognition 0x21 → active
Adaptation → Channel: Car Function List BAP Gen2 - traffic sign recognition 0x21 msg bus → Databus extended
Adaptation → Channel: Car Function Adaptations Gen2 - menu display road sign identification → active
Adaptation → Channel: Car Function Adaptations Gen2 - menu display road sign identification over threshold high → active
Coding → Long Coding → Byte: 24 → Bit: 6 → active
Module: A5 (Front Sensors Driver Assistance System)
Security Access → Code: 20103
Coding → Long Coding → Byte: 01 → Bit: 0 → active
Adaptation → Channel: Road Sign Detection Fusion Mode → Road sign fusion
Adaptation → Channel: Display end of speed limit symbol → active
Adaptation → Channel: Valid additional characters → 00100111
Module: 17 (Instruments Cluster)
Coding → Long Coding → Byte: 05 → Bit: 2 → active
2.Procedure
In this two procedures there are some difference in long coding.
