rear inner turn signal does not blink

[waitforit]

Audi A3 8V mid 2014.

The rear inner turn signals have stopped blinking. The outer ones work in normal mode. When I turn on the turn signal or emergency light, the outer turn signal blinks, but the inner turn signal is just static.

I suspect that it is necessary to make adaptation, but what to prescribe, I do not know.

Initially everything worked fine, but I applied some coding through carscanner related to the lights. One of them probably messed up the lights. I rolled back the changes, but the turn signals didn't work as normal.Initially everything worked fine, but I applied some coding through carscanner related to the lights. One of them probably messed up the lights. I rolled back the changes, but the turn signals didn't work as normal.





The values in the blocks are correct

[dv52 (Australia)]

@waitforit: Hi.

Hmm...... presumably the tail-lights on this car were factory fitted and NOT retrofitted after the car was built? Your Leuchte-set values look OK except for Dimmwert AB >127 (instead of 100). But I would not have thought that this difference would cause the inner turn-signal lamps to not work.

If the above change does not fix the problem, copy-and-paste the coding values for the outer turn-signal Leuchte-sets onto those of the inner Leuchte-sets - except for the Lampendefektbitposition and Fehlerort mittleres Byte DTC-DFCC channels.

Don

[waitforit]

The lights are stock. Changing the Dimmwert to 127 did nothing. Where is the inner Leuchte-sets?

[dv52 (Australia)]

hmm....... as I said in my first reply - it's not surprising that my suggested changes didn't work!

OK - let's reset and make sure that we both understand the situation here (because I'm a tad confused): This car was introduced in your first post as a "Audi A3 8V mid 2014".

From my reading of your words, I believe that the problem on this car is with the INNER turn-signal lamps on the tail-light fittings - which are LED type and which were factory installed. 

The wiring diagram for 8V FF model A3s lists a number of different OEM versions of LED tail-lights that were fitted to these cars - ALL of which had dual turn-signal lamps. The variations in OEM tail-lights relate to both the country of sale and different options for the body build type - so lots of possibilities!! 

I'm not familiar with ALL these options and the tail-light type in your video doesn't help me identify which particular version is installed in this car. The actual version tail-lights that was built into this car will be listed on the vehicle identification label (see sample below)- it will have a number like 8SP, or 8SK, or even 5C1 if this is a USA model. (is this a USA model?)

So, the information above is background stuff

Again, with the caveat that there are lots of different tail-light options- generally, the 2 x Leuchte-sets that you posted in your first post are for the OUTER turn-signal lamps (once more, this is a generally the case - in reality, the actual Leuchte-set assignment varies with the tail-light option built into the car)

Not surprisingly, the Leuchte-set assignment for the INNER turn-signal lamps also varies with the tail-light option. 

As I said in my previous reply, I suggest that you copy-and-paste the 17 x adaptation channels (do NOT change the 2 x channels that I identified in my first reply) in the Leuchte-sets as follows:

• Map the channel values from Leuchte18BLK HLA60 onto Leuchte16BLK SLB35BLK SL KC9 (left-side tail-lights)
• Map the channel values from Leuchte19BLK HRC31 onto Leuchte17TFL R BLK SRB3TFL R BLK SR KC3  (right-side tail-lights)
  

Note: when making these changes, also include my previous suggestion Dimmwert AB >127.

Don