First adaptation of charge pressure actuator - P2263

[niels94]

Hey there,

I'm having a problem after replacing the Turbo Actuator rod.
This one snapped a while back, welded it for the time being, replaced it yesterday with a aftermarket part.

However after replacement, I end up getting P226300 - Turbocharger/Supercharger boost system performance.

I have tried running First Adaptation of charge pressure actuator, but the error still comes back once the engine has started.

If I look at the values, the charge pressure actuator specified position never only goes from 20-120%, it seems the car doesn't want to keep the new values.

Anyone got a suggestion to get the right values in?

Thanks in advance!

[dv52 (Australia)]

hmm...... could be a number of different causes for this error code:

• Charge air pressure sender (G31) could be faulty - or the wiring loom for G31 from engine module
• Charge pressure control solenoid valve (N75) could be defective
• Hoses incorrect connected, disconnected, blocked or leaking

I'm guessing, of course - just suggestions!!

Don

[jonatj]

I’m trying to do the same thing on my Turbo wastegate actuator. Were you successful?