philt
New Member
Posts: 1 
|
Post by philt on Nov 18, 2017 6:15:20 GMT
Has anybody got the coding to enable Dynamic Road Sign Display (Traffic Sign Recognition) with AID dashboard on the 7.5?
|
|
|
|
Post by vwjap on Apr 1, 2018 8:41:50 GMT
I have it enabled from the factory so not done it myself but coding is
Select Control unit 5F (Information Electrical)
Adaptation
Select Car_Function_List_BAP_Gen2 traffic_sign_recognition_0x21
Değer=Active
Select Car_Function_Adaptations_Gen2-menu menu_display_road_sign_identification
Değer=Active
Go to Long Coding
Byte 24, Activate Bit 6
Control unit A5 (front / advance camera)
Security access
Access Code 20103
Control unit Long Coding
Byte 16, Activate Bit 4
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 5
Activate Bit 2
Control unit A5 (front / advance camera)
Adaptation
Road Sign Detection Fusion Mode
Change to ‘Road Sign Detection’
Reboot Infotainment
|
|
|
|
Post by kopter28 on Apr 8, 2018 3:40:55 GMT
Did you ever see a message like this in your car?  I followed your coding and the system recognizes the traffic signs but I keep getting that message. |
|
|
|
Post by bergerac82 on Apr 8, 2018 4:00:52 GMT
Made the same mods - get the same message (Canadian '18R)
My guess is that the car knows it doesn't recognize all Canadian signage. The warning message is grey in the vehicle status screen (not yellow) and doesn't trigger a dash warning light (like some other coding fails do), so I don't think we're dealing with a major problem.
Just my 2 cents, and not driven by data!
Out of interest, if you turn the sign recognition off in the car settings menu does the error message go away?
|
|
|
|
Post by vwjap on Apr 8, 2018 21:13:26 GMT
I think it’s something to do with not connecting to the GPS from the radio, have heard a few people get it
also some say it’s a EU feature and if the car senses it’s not in the EU it also brings up the message
As said mine was factory, so I don’t get the message
|
|
|
|
Post by trickieb on Apr 9, 2018 6:19:08 GMT
I had something similar on my Mk7 when i tried to enable this, i found that changing the database setting fixed it for me, I will see if i can find the exact coding.
Cheers
Rich
|
|
dany
Closed beta tester
Posts: 4
|
Post by dany on Apr 15, 2018 18:52:39 GMT
this coding is fine for a golf 7 makeover right? being in Italy I should not see the message that comes out to some of you right?
|
|
|
|
Post by kopter28 on Apr 15, 2018 20:21:33 GMT
I had something similar on my Mk7 when i tried to enable this, i found that changing the database setting fixed it for me, I will see if i can find the exact coding. Cheers Rich Thank you, I would really appreciate it! |
|
|
|
Post by vwjap on Apr 15, 2018 20:49:58 GMT
Just looked through the coding I put in and it looks wrong (yes I checked in my car)
A difference is
Control unit A5 (front / advance camera)
Adaptation
Road Sign Detection Fusion Mode
Change to ‘Road Sign Detection’
Mine is “road sign fusion”
So maybe try that and see if it works, as reading a few things in what it does, it looks like it gets the speed info from the GPS and if it detects a sign and it’s different it will Chang the screen
|
|
|
|
Post by maximos on Apr 17, 2018 15:00:43 GMT
this coding is fine for a golf 7 makeover right? being in Italy I should not see the message that comes out to some of you right? Have you tried? I want also to test it out at my gti fl. I live in germany. |
|
|
|
Post by maximos on Apr 17, 2018 15:41:33 GMT
I have just enabled. Is there any way to take alarm if we over speed?
|
|
|
|
Post by vwjap on Apr 17, 2018 15:48:29 GMT
Isn’t that in the setting on the MIB? Plus I think you can set a alarm depending on the speed your over the limit
|
|
|
|
Post by maximos on Apr 17, 2018 15:59:12 GMT
Isn’t that in the setting on the MIB? Plus I think you can set a alarm depending on the speed your over the limit Yes I found it. I hope there is no problem like the friends from Canada. Thank you very much. |
|
|
|
Post by maximos on Apr 18, 2018 12:01:13 GMT
Just looked through the coding I put in and it looks wrong (yes I checked in my car) A difference is Control unit A5 (front / advance camera) Adaptation Road Sign Detection Fusion Mode Change to ‘Road Sign Detection’ Mine is “road sign fusion” So maybe try that and see if it works, as reading a few things in what it does, it looks like it gets the speed info from the GPS and if it detects a sign and it’s different it will Chang the screen After I forgot to make this I was taken the same alert but after I change to "road sign fusion" the car now see the sign and working together with the GPS. Very good job. Many many thanks again. |
|
|
|
Post by kopter28 on Apr 20, 2018 2:52:14 GMT
Just looked through the coding I put in and it looks wrong (yes I checked in my car) A difference is Control unit A5 (front / advance camera) Adaptation Road Sign Detection Fusion Mode Change to ‘Road Sign Detection’ Mine is “road sign fusion” So maybe try that and see if it works, as reading a few things in what it does, it looks like it gets the speed info from the GPS and if it detects a sign and it’s different it will Chang the screen After I forgot to make this I was taken the same alert but after I change to "road sign fusion" the car now see the sign and working together with the GPS. Very good job. Many many thanks again. So you’re not getting that alert anymore? |
|
|
|
Post by maximos on Apr 20, 2018 4:49:42 GMT
After I forgot to make this I was taken the same alert but after I change to "road sign fusion" the car now see the sign and working together with the GPS. Very good job. Many many thanks again. So you’re not getting that alert anymore? No. Working perfect without alert. |
|
|
|
Post by kopter28 on Apr 20, 2018 20:40:22 GMT
So you’re not getting that alert anymore? No. Working perfect without alert. Are you in North America (Canada or US) or are you in the EU? I tried the coding again with the Fusion option but unfortunately it's not recognizing or showing any signs on the dash or navigation screens even though the option to show them under Assistance Systems is there, and is turned on. I also noticed that when I make these changes I start getting faults in some modules.   If I change the coding back to the original (no traffic sign recognition) and clear the faults they don’t come back. In Adaptation, “Car_Function_List_BAP_Gen2” there is the following setting: traffic_sign_recogdnition_0x21_msg_bus Mine is set to: Databus extended What is yours? |
|
|
|
Post by vwjap on Apr 20, 2018 21:47:03 GMT
traffic_sign_recognition_0x21:
activated
traffic_sign_recognition_0x21_msg_bus:
Databus extended
Same
Could it be the stereo? Is it a nav pro? Just wondering
Also do you have the camera in the windscreen? (Not teaching you to suck eggs by the way)
|
|
|
|
Post by kopter28 on Apr 20, 2018 22:38:41 GMT
traffic_sign_recognition_0x21: activated traffic_sign_recognition_0x21_msg_bus: Databus extended Same Could it be the stereo? Is it a nav pro? Just wondering Also do you have the camera in the windscreen? (Not teaching you to suck eggs by the way) In Canada we only get the 8” Discover, we don’t get the 9.5” Discover Pro.  Yes, definitely have the camera. As mentioned in the posts above I can get traffic sign recognition to work, and the camera picks them up but I get the warning. Hoping to find some combination of coding that would allow traffic recognition to work but without the warning. |
|
|
|
Post by vwjap on Apr 20, 2018 23:23:24 GMT
I think I read somewhere that the discover media does not have a speed limit database built into it.
|
|
|
|
Post by MGRobbie on Mar 8, 2019 7:30:25 GMT
I have it enabled from the factory so not done it myself but coding is Select Control unit 5F (Information Electrical) Adaptation Select Car_Function_List_BAP_Gen2 traffic_sign_recognition_0x21 Değer=Active Select Car_Function_Adaptations_Gen2-menu menu_display_road_sign_identification Değer=Active Go to Long Coding Byte 24, Activate Bit 6 Control unit A5 (front / advance camera) Security access Access Code 20103 Control unit Long Coding Byte 16, Activate Bit 4 Select Control unit 17 (Dashboard) Control unit Long Coding Byte 5 Activate Bit 2 Control unit A5 (front / advance camera) Adaptation Road Sign Detection Fusion Mode Change to ‘Road Sign Detection’ Reboot Infotainment I followed all these steps however I was unable to complete it. your second adaption on 5F was changes as follows: Yours: Select Car_Function_Adaptations_Gen2-menu menu_display_road_sign_identification Değer=Active I changed to: Select Car_Function_Adaptations_Gen2-menu menu_display_road_sign_identification
Değer=ActiveIn control A5 I was unable to activate bit4 in byte 16. Message was: Unable or not allowed to make changes.
Ofcourse last line was also modified to “road sign fusion" Any suggestions from your side. regards Rob |
|
|
|
Post by sedestrian on May 28, 2019 21:55:44 GMT
Hi, are the maps required? I wanted to activate traffic sign recognition on my car but I have discover media without maps, I'm in italy
|
|
|
|
Post by newty on May 30, 2019 10:33:55 GMT
VW is selling this only with a nav because sign detection alone is very limited and relies to a checkup on the map. Turns will not change anything in the sign detection until a sign is recognized, city signs are not recognized, as these entirely map data. Still, you can enable to show all detected signs, but there is no intelligence behind it. Plus, you will see the "Traffic sign recognition limited" every time, because there is no road data avaliable.
|
|
|
|
Post by snowatom on Mar 14, 2020 21:36:41 GMT
kopter28 or anyone else who might help with below issue Did you ever solve the Databus error in ACC unit, when enabling traffic sign assist? Cause I get the same error with acc, and it some times completely stops working until next time engine has been off. This acc error goes away when deactivating the sign assist. This is the only place I have found another person with the same error, and all the guides for enabling sign assist are the same. Weird that it does something with how the acc works. Hoping to get some answers and assistance.
|
|
|
|
Post by dv52 (Australia) on Mar 14, 2020 22:14:42 GMT
^^^hmm..... if I can add to the large volume of information that is already on this thread - as newty said so eloquently: There are 3 operation modes for TSR: Electric Horizon - only use navigation data Sign recogniztion - only use camera data (TSR only detects round signs, no city sings, also does not credit turns - so it keeps old limits for a long time until something new is seen) Fusion - some algorithms decide what traffic sign is plausible and display that. This is factory default. pACC incorporates to use map-data for bends, roundabouts etc to reduce your speed below the limit where neccessary. so- perhaps set the adaptation channel in the hexA5 module, Road sign detection fusion mode to a value that is appropriate? Don |
|
|
|
Post by snowatom on Mar 15, 2020 8:45:34 GMT
I’ve been thinking the same thing, But on a Skoda the ACC does incorporate map-data into ACC. So I’m guessing that this has no influence. Still searching for the reason for why I’m getting an error on the infotainment system (sometimes), when traffic assist is activated. But it could also just be a weird coincidence, and that the two things has nothing in common.
|
|
|
|
Post by newty on Mar 15, 2020 11:14:55 GMT
Nah. We have that tried out with changing the road sign fusion. Camera is still complaining about missing data from the Nav. Seems like this is affecting the displayed signs, but does not turn off the software requesting signs from the infotainment - for me this looks like an development feature, but never ment to work on roads.
Regarding errors in ACC: There is the options to enable traffic sign recognition in the ACC. This is reported to be needed with Conti ACCs, maybe this is needed in some software combination with Bosch sensors, too
|
|
|
|
Post by catnip on Oct 27, 2020 12:28:56 GMT
AUS mode MY 19 Golf R MK7.5 with 9.5 Discover Pro.
Road Sign Detection will work with: ‘road sign detection’
The “Dynamic Road Sign Display is current limited” message show up each time when start drive and detect speed sign.
Will show speed limit at Navigation screen at infotainment and AID.
If change to “road sign fusion”, no any speed sign detect and no speed limit show in Navigation screen at infotainment and AID.
|
|
medsox
Junior Member
2019 GTI MK7FL Autobahn DSG 2.0L USA
Posts: 58
|
Post by medsox on Oct 17, 2022 14:37:10 GMT
This is the error I am getting after using the coding below. Not sure where I'm going wrong.  After coding I now have the option to see the Dynamic Road Sign Setting.  When I select Visual/Acoustic I get this message.  I do believe I have the correct camera  These are the two coding's I have tried. Thanks to vwjap for them. 1. Select Control unit 5F (Information Electrical) Adaptation Select Car_Function_List_BAP_Gen2 traffic_sign_recognition_0x21 Değer=Active Select Car_Function_Adaptations_Gen2-menu menu_display_road_sign_identification Değer=Active Go to Long Coding Byte 24, Activate Bit 6 Control unit A5 (front / advance camera) Security access Access Code 20103 Control unit Long Coding Byte 16, Activate Bit 4 Select Control unit 17 (Dashboard) Control unit Long Coding Byte 5 Activate Bit 2 Control unit A5 (front / advance camera) Adaptation Road Sign Detection Fusion Mode Change to ‘Road Sign Fusion’ Reboot Infotainment 2. Select Control unit 5F (Information Electrical) Adaptation Select Car_Function_List_BAP_Gen2 traffic_sign_recognition_0x21 Değer=Active Select Car_Function_Adaptations_Gen2-menu menu_display_road_sign_identification Değer=Active Go to Long Coding Byte 24, Activate Bit 6 Control unit A5 (front / advance camera) Security access Access Code 20103 Control unit Long Coding Byte 16, Activate Bit 4 Select Control unit 17 (Dashboard) Control unit Long Coding Byte 5 Activate Bit 2 Control unit A5 (front / advance camera) Adaptation Road Sign Detection Fusion Mode Change to ‘Road Sign Detection’ Reboot Infotainment |
|
|
|
Post by newty on Oct 18, 2022 8:16:36 GMT
PSD (Byte 27 Bit 7) in 5F should be enabled.
|
|
