Post by nenadneni on Oct 10, 2024 14:13:49 GMT
Hi all,
Recently I purchased some OEM Powerfolding mirrors from a European Supplier for my MK7.5 Golf Sportwagen / Comfortline with DAP and LP. I installed the mirrors all fine and good, and all functions were working except for the folding and puddle light functions. I discovered this was due to having the 5Q0959393B and 5Q0959392B modules in my door and needed to be replaced with 593B and 592B modules respectively. I did some research and found that people were saying buying a used set would be better than buying a fresh set as they wouldn't need as much coding. I found a set on Ebay from a seller saying they were from a MK7 Sportwagen (They were listed as from a LHD vehicle), so they should have been plug and play + recoding for mirrors. Or so I thought. Upon receiving them and copying all the long coding over from my old modules, I'm encountering quite a few problems.
The modules came with coding for "right steering vehicle", i changed this to "left steering vehicle" when doing the coding.
1. Lock switch: Unlock locks the car, Lock unlocks the car.
2. Front window switches: Down is up, Up is down. Rear switches seem to be fine and work as they should. (my comfort open/close works, but is backwards. IE when i hold down the lock button, the rears go up and the fronts go down)
3. The mirror control knob is all sorts of messed up. The movements for the RIGHT mirror are completely wrong.. Up is left, Down is right, Left is Up, Right is Down. The LEFT (drivers side) mirror seems be only wrong in that pushing it Left goes Right and Right goes Left. When the knob is turned to any position other than FOLD the drivers side mirror folds and puddle light turns on, but the passenger side remains unfolded. The passenger side will fold up when i turn the knob to FOLD, but this causes the drivers side mirror to unfold.
4. The coding for the fold when locked works perfectly on the Passenger side, but obviously not for the drivers side.
What should i do ?
Recently I purchased some OEM Powerfolding mirrors from a European Supplier for my MK7.5 Golf Sportwagen / Comfortline with DAP and LP. I installed the mirrors all fine and good, and all functions were working except for the folding and puddle light functions. I discovered this was due to having the 5Q0959393B and 5Q0959392B modules in my door and needed to be replaced with 593B and 592B modules respectively. I did some research and found that people were saying buying a used set would be better than buying a fresh set as they wouldn't need as much coding. I found a set on Ebay from a seller saying they were from a MK7 Sportwagen (They were listed as from a LHD vehicle), so they should have been plug and play + recoding for mirrors. Or so I thought. Upon receiving them and copying all the long coding over from my old modules, I'm encountering quite a few problems.
The modules came with coding for "right steering vehicle", i changed this to "left steering vehicle" when doing the coding.
1. Lock switch: Unlock locks the car, Lock unlocks the car.
2. Front window switches: Down is up, Up is down. Rear switches seem to be fine and work as they should. (my comfort open/close works, but is backwards. IE when i hold down the lock button, the rears go up and the fronts go down)
3. The mirror control knob is all sorts of messed up. The movements for the RIGHT mirror are completely wrong.. Up is left, Down is right, Left is Up, Right is Down. The LEFT (drivers side) mirror seems be only wrong in that pushing it Left goes Right and Right goes Left. When the knob is turned to any position other than FOLD the drivers side mirror folds and puddle light turns on, but the passenger side remains unfolded. The passenger side will fold up when i turn the knob to FOLD, but this causes the drivers side mirror to unfold.
4. The coding for the fold when locked works perfectly on the Passenger side, but obviously not for the drivers side.
What should i do ?
