|
|
Post by ciaklovelife on Jan 20, 2018 16:17:01 GMT
I have a problem with my Tig MQB, I was messing around with OBD11 and now I have the AFS cornering light not working due to an error on the dashboard, investigating looks like the error is: headlights fault code: C107E54  any ideas on how to fix it? I've already tryed looking into the history of the app, but doesn't go back more than 10 items, so I don't know where and when I mess about it thanks |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 20, 2018 17:16:35 GMT
cant help with the issue as its not my car.
However with regards to history if you have done more than 10 changes then you can see them all.
In between the word HISTORY and the Email icon is the Filter menu, open that up and select all for time and tick all the various boxes so you see everything.
If you use the lookup function on the OBD app C107E54 = Headlight no basic settings
|
|
|
|
Post by ciaklovelife on Jan 20, 2018 17:59:25 GMT
exactly, I mess the basic settings of the lights and now doesn't work, there were other mistakes made but I managed to recover that ones, this one is drive me crazy! the car is too recent so no one else experienced this issue yet
any other advice?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 20, 2018 18:47:41 GMT
Sorry not my car which means I dont know the answer.
However what settings do you have in your basic settings for where your lights are.
Is there something in there like resetting of all adaption values
|
|
|
|
Post by ciaklovelife on Jan 20, 2018 19:13:09 GMT
reset tried but nothing, came back few seconds after
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 20, 2018 19:25:37 GMT
Are there any other changes in your history that you need to undo and then run the reset.
update I have also found that sometimes you need to completley reboot the phone and then stuff that does not work then does (just in case)
And just to add have you cleared your app cache just in case.
|
|
|
|
Post by Guccio on Jan 26, 2018 3:39:23 GMT
|
|
|
|
Post by krystian660 on Jan 29, 2018 10:54:11 GMT
Do this on flat surface:
55 - Headlight Regulation > Basic Settings > "Basic headlight setting"
55 - Headlight Regulation > Basic Settings >"Acknowledge basic setting"
|
|
|
|
Post by tiguan220 on Mar 18, 2018 15:52:11 GMT
hello. I have the same error. the difference is only in unknown ambient data 930000008000. all the changes are returned. error remains
|
|
|
|
Post by krystian660 on Mar 19, 2018 9:50:09 GMT
hello. I have the same error. the difference is only in unknown ambient data 930000008000. all the changes are returned. error remains You did it on flat surface? 4B Multifunction Module > Basic Settings > "Basic headlight setting" 4B Multifunction Module > Basic Settings >"Acknowledge basic setting" |
|
|
|
Post by tiguan220 on Mar 19, 2018 11:34:58 GMT
hello. I have the same error. the difference is only in unknown ambient data 930000008000. all the changes are returned. error remains You did it on flat surface? 4B Multifunction Module > Basic Settings > "Basic headlight setting" 4B Multifunction Module > Basic Settings >"Acknowledge basic setting" I have not done anything yet. I'm afraid to make it worse. I am experiencing an ASF error on the dashboard. The headlights do not illuminate the turns when driving. thanks for the help |
|
|
|
Post by tiguan220 on Mar 19, 2018 14:02:34 GMT
made the basic setting. everything worked, the error disappeared.
there is a question: why get up on a flat surface if only one item "factory settings" is available for selection?
Basic settings are restored from the copy or adjusted over a flat surface again?
|
|
|
|
Post by krystian660 on Mar 20, 2018 7:21:22 GMT
Probably basic settings are adjusted again.
|
|
any ideas on how to fix it?