|
Post by nogard on Apr 6, 2016 10:19:59 GMT
hi, i know that exists a problem with VCDS v 15.7.0 when it's neccesary change a adpatation value in 5F module. With v 15.7.3 and later is solved, and my question is if exists any problem between ODBeleven product and 5F modules of MiB Gen 2 of the MY16 model or all the channel are read and written correctly
|
|
mikel
New Member
Posts: 28
|
Post by mikel on Apr 7, 2016 17:15:03 GMT
Very good question.
We all know these errors with VCDS and 5F module in the MY16 equipment.
But we do not know if the OBDeleven these failures occur and if they occur, if they could repair.
I think the developer of this product should answer these questions and should be so, you must first announce it to avoid evils vehicles.
He could be involved in a class action if they occur errors in switchboards and have not previously warned of the damage that may result from the use of this device by faulty programming.
I hope we can clear up soon.
Saludos Nogard
|
|
|
Post by OBDeleven on Apr 8, 2016 7:10:36 GMT
As we tested our tool doesn't have any issues with this units. There was specific VCDS software bug.
|
|
|
Post by nogard on Apr 8, 2016 9:35:34 GMT
As we tested our tool doesn't have any issues with this units. There was specific VCDS software bug. OK, THX!!
|
|