SeanG
New Member
New OBDeleven user
Posts: 3 
|
Post by SeanG on Feb 9, 2018 22:49:20 GMT
Hi folks, I’d like to enable TSR on my Jan 18 Octavia. I have HBA option already in the car. Can it be done? All help much appreciated.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2018 23:23:29 GMT
|
|
|
|
Post by ccosmin on May 21, 2018 19:12:45 GMT
You need to have lane assist with the more performance camera. With HBa does not work.
|
|
|
|
Post by sgt1297 on Feb 5, 2019 20:35:33 GMT
|
|
|
|
Post by sgt1297 on Feb 7, 2019 14:37:03 GMT
I have tried and failed to initiate TSR because I do not have the correct camera. If you don't have MODULE 5A you don't have the correct camera! I made 3 changes through adaptations in module 5F using the security code 20103.I reset 2 of them to the original values but missed one. I now get an error message when I scan with the OBD11 that I do not believe was there before I carried out the changes. The fault code is U111100 - Function Limitation Due to Missing Message. Now when I enter Module 5F, I enter code 20103 which shows green and is accepted. I then go into adaptations to change the value back to its original value but it will not accept the change. I had previously changed other values but missed this one and having carried out a history check found this value had not been put back to its original setting. What am I doing wrong?
|
|
|
|
Post by sgt1297 on Feb 14, 2019 20:30:24 GMT
Update.
Having tried many times to put the changes made back to the original settings but failed as OBDEleven just would not let me save the changes, I contacted customer support via the help section of the App.
Although they didn't know what was preventing me from making and saving changes I was directed to select Advanced Identification.
I selected it and was able to look at lots of information but nothing that indicated a problem with the dongle, App or the vehicle.
I came out of that and attempted to perform the changes I had up to this point been unable to do.
Hey presto - first attempt changes made and accepted - result.
The fault code U111100 when cleared did not come back.
Happy days.
Thank you customer support.
|
|
