|
|
Post by decres3 on Feb 10, 2018 18:56:19 GMT
To keep this thread back to Golf can you raise this on the Audi stream please, just tell us the coding you used and confirm what country you are in, just in case it impacts the coding. Closing Windows When Iglite Off Select Control unit 09 (Central Electrics) Security access Access Code 31347 Adaptation (13) -Zugangskontrolle 2 released trailing FH cancel at Tueroeffnen Value=Aktif Country: México |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 10, 2018 19:14:23 GMT
decres3 can you just confirm, do you want the windows to close when you lock your door or just when you turn off the ignition.
Also can you confirm where you got this coding from.
Cheers
|
|
|
|
Post by decres3 on Feb 11, 2018 17:49:39 GMT
decres3 can you just confirm, do you want the windows to close when you lock your door or just when you turn off the ignition. Also can you confirm where you got this coding from. Cheers hello cupra280, sorry for interrupting the golf thread, and thanks for your help... i got the coding from an audi forum and i copy pasted it in a word doc, but it did not work... i wanted for the windows to close with one click for locking (so i dont have to long press the locking button) if that is not possible i would prefer to close with ignite off. and one other question, does the country really differ the coding? Decre |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 11, 2018 17:52:22 GMT
No problem just trying to keep threads relevant
ok can you please give me link to the site and or the coding so I can have a look at it please.
With regards to country yes the US and Japan have very different light setups (as in rules) so there setup can be different to Europe (ROW or Rest of the World)
Cheers
|
|
|
|
Post by decres3 on Feb 11, 2018 18:17:13 GMT
No problem just trying to keep threads relevant ok can you please give me link to the site and or the coding so I can have a look at it please. With regards to country yes the US and Japan have very different light setups (as in rules) so there setup can be different to Europe (ROW or Rest of the World) Cheers I've checked my history but i cant find it because it was about 2 weeks ago but now i remember i actually got it from an mk7 thread upss, but is there any way of doing it for the S3 Thanks Decre |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 11, 2018 21:20:26 GMT
let me check and get back to you during the week
|
|
|
|
Post by decres3 on Feb 12, 2018 1:12:55 GMT
let me check and get back to you during the week Perfect, Thank you man Decre |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2018 18:50:39 GMT
|
|
|
|
Post by decres3 on Feb 15, 2018 1:19:10 GMT
Perfect, let me try it and ill let you know once its done. Thanks |
|
|
|
Post by decres3 on Feb 15, 2018 23:15:08 GMT
I tried it, and it still does not work, what might it be? Cheers |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 16, 2018 10:21:31 GMT
Sorry dont know the audi menus but on my car there is an option to turn comfort windows on and off from memory and also to have it on drivers window only or all windows. Do you have any of these items showing up under car settings.
One other thing if you have a value in adaptions in control unit 09 called Komfortbedienung global: please make sure its set to Active.
Sorry one last thing did you have all the adaption chanels that were in the instructions and it did not work or just that you could not find them.
|
|
|
|
Post by decres3 on Feb 16, 2018 20:56:13 GMT
Sorry dont know the audi menus but on my car there is an option to turn comfort windows on and off from memory and also to have it on drivers window only or all windows. Do you have any of these items showing up under car settings. One other thing if you have a value in adaptions in control unit 09 called Komfortbedienung global: please make sure its set to Active. Sorry one last thing did you have all the adaption chanels that were in the instructions and it did not work or just that you could not find them. Yes, I had all the channels and I modified them as the instructions said, let me check if I have Komfortbedienung global, and see if it makes any difference. Thanks, ill keep you notified |
|
|
|
Post by decres3 on Feb 17, 2018 15:01:46 GMT
Sorry dont know the audi menus but on my car there is an option to turn comfort windows on and off from memory and also to have it on drivers window only or all windows. Do you have any of these items showing up under car settings. One other thing if you have a value in adaptions in control unit 09 called Komfortbedienung global: please make sure its set to Active. Sorry one last thing did you have all the adaption chanels that were in the instructions and it did not work or just that you could not find them. Yes, I had all the channels and I modified them as the instructions said, let me check if I have Komfortbedienung global, and see if it makes any difference. Thanks, ill keep you notified Indeed, i had the Komfortbedienung global setting, and it was set to active, and still not working. Regards |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 17, 2018 19:55:16 GMT
Decre sorry been out and about today.
can I just confirm this code should allow you to open and close your windows (and maybe roof) with a single touch of the open or close button, rather than having to hold the button for some time.
If the answer is yes then to save a bit of time can you send me a copy of your backup of the 09 control unit so I can compare against mine, Just PM it to me if you can
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 18, 2018 18:53:26 GMT
Decre, just seen this on another site that may help, sometimes the windows forget to close using the comfort mode and have to be reset.
Check this out and see if it helps
One-touch opening and closing*
One-touch opening and closing means you
do not have to hold down the button.
Buttons ››› Fig. 137 1 , 2 , 3 and 4 have
two positions for opening windows and two
for closing them. This makes it easier to open
and close windows to the desired position.
One-touch closing
– Pull up the window button briefly up to the
second position. The window closes fully.
One-touch opening
– Push down the window button briefly up to
the second position. The window opens
fully.
Restoring one-touch opening and closing
The automatic open and close function will
not work if the battery has been temporarily
disconnected. The function can be restored
as follows:
– Close the window as far as it will go by lifting
and holding the electric window switch.
– Release the switch and then lift it again for
1 second. This will re-enable the automatic
function.
If you push (or pull) a button to the first
stage, the window will open (or close) until
you release the button. If you push or lift the
button briefly to the second stage, the window
will open (one-touch opening) or close
(one-touch closing) automatically. If you operate
the button while the window is opening
or closing, it stops at this position.
On a separate note I saw on a Skoda site yesterday that they no longer do comfort close on a roof, apparently some twit got there head stuck in the roof so they then turned off the function on the newer cars.
|
|
|
|
Post by decres3 on Feb 20, 2018 23:18:15 GMT
Decre, just seen this on another site that may help, sometimes the windows forget to close using the comfort mode and have to be reset. Check this out and see if it helps One-touch opening and closing* One-touch opening and closing means you do not have to hold down the button. Buttons ››› Fig. 137 1 , 2 , 3 and 4 have two positions for opening windows and two for closing them. This makes it easier to open and close windows to the desired position. One-touch closing – Pull up the window button briefly up to the second position. The window closes fully. One-touch opening – Push down the window button briefly up to the second position. The window opens fully. Restoring one-touch opening and closing The automatic open and close function will not work if the battery has been temporarily disconnected. The function can be restored as follows: – Close the window as far as it will go by lifting and holding the electric window switch. – Release the switch and then lift it again for 1 second. This will re-enable the automatic function. If you push (or pull) a button to the first stage, the window will open (or close) until you release the button. If you push or lift the button briefly to the second stage, the window will open (one-touch opening) or close (one-touch closing) automatically. If you operate the button while the window is opening or closing, it stops at this position. On a separate note I saw on a Skoda site yesterday that they no longer do comfort close on a roof, apparently some twit got there head stuck in the roof so they then turned off the function on the newer cars. Perfect, let me check it out, and il keep you posted. Thank You!! |
|
|
|
Post by decres3 on Feb 26, 2018 6:27:54 GMT
Decre, just seen this on another site that may help, sometimes the windows forget to close using the comfort mode and have to be reset. Check this out and see if it helps One-touch opening and closing* One-touch opening and closing means you do not have to hold down the button. Buttons ››› Fig. 137 1 , 2 , 3 and 4 have two positions for opening windows and two for closing them. This makes it easier to open and close windows to the desired position. One-touch closing – Pull up the window button briefly up to the second position. The window closes fully. One-touch opening – Push down the window button briefly up to the second position. The window opens fully. Restoring one-touch opening and closing The automatic open and close function will not work if the battery has been temporarily disconnected. The function can be restored as follows: – Close the window as far as it will go by lifting and holding the electric window switch. – Release the switch and then lift it again for 1 second. This will re-enable the automatic function. If you push (or pull) a button to the first stage, the window will open (or close) until you release the button. If you push or lift the button briefly to the second stage, the window will open (one-touch opening) or close (one-touch closing) automatically. If you operate the button while the window is opening or closing, it stops at this position. On a separate note I saw on a Skoda site yesterday that they no longer do comfort close on a roof, apparently some twit got there head stuck in the roof so they then turned off the function on the newer cars. Perfect, let me check it out, and il keep you posted. Thank You!! Did not work, i think it does not work for the s3... |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 26, 2018 9:18:37 GMT
That would supprise me as its on the cheaper VW Group models I would expect it on the Audi.
One last thing to try can you take a backup of your 09 control unit and pm it to me and i will have a look through the settings to see if there is anything else obvious.
Cheers
|
|
|
|
Post by decres3 on Feb 27, 2018 18:01:10 GMT
That would supprise me as its on the cheaper VW Group models I would expect it on the Audi. One last thing to try can you take a backup of your 09 control unit and pm it to me and i will have a look through the settings to see if there is anything else obvious. Cheers Ill send you a PM; Thanks Regards |
|
|
|
Post by streetrod60 on Jul 15, 2019 17:56:07 GMT
Hi, sorry to jump in. Is the problem solved? Because I also have the same problem related to this. I've been messing arround with the coding for all doors. And now is back to normal, but not for the window one click function for the driver side. All 3 other window be able to automatically open and close with only one click. Only driver window I have to hold it to fully open/close.
Is there anything to do with the coding? I have also done the procedure like above, to hold window down 5 second and hold window up 5 second.
|
|
