Post by Deleted on Feb 26, 2018 13:56:48 GMT
This thread is a work in progress item, I will over time complete all the control units I have on my 2014 Leon Cupra 280.
All basic settings have been added
All Live data items have been added
All output test's have been added
All Change service details have been added
Where specified all Sub Systems have been listed.
Work to complete:
Cross reference fully Long Coding 0 & 1 and update descriptions in 1 on app where missing
Complete the translations to english and add additional information as I find it.
There are no values show in the Adaption Maps currently, just the structure and my personal description where relevant once I have this bit completed I will update with options list against each adaption but that wont get done quickly.
Long Coding names are those that the user community have provided and no responsibility can be taken for accuracy or my Typo's.
Under long coding for the older modules there is only a list of Bytes and Bits, for the more modern versions you have a screen (0) which highlights some of the coding and options as
well as the second screen (1) that shows Bytes and Bits. As part of this thread I am also trying to map the new look to old look mappings.
If you amend one of them then the other is updated so they are showing same information but in a different style.
Further you will see below that on some of the Bytes i have multiple versions with the same description, this is because there are multiple answers so for example
The description of Manufacturer is shown 3 times but this supports VW, SKODA, SEAT, LAMBO Etc according to which bits that are ticked.
Explanation of the various items you will find when using OBD11 (For MQB Platform does not include older UDS Control units)
Thanks to DV52 once again for this following explanation (which made perfect sense to me):
All modern cars can be considered to be nothing more than a number of control systems connected to an engine and a set of wheels (yes this is a gross simplification, I agree!). Most control systems in a car are what's called "closed-loop systems". And ALL these control systems operate the same- they all perform a very basic task: They have an internal process that produces an output signal based on feedback and an input signal(s) - often feedback comes from a sensor/transducer of some sort.
DV52 Picture (thanks)
In all modules that operate control systems (i.e control modules) and regardless of the vehicle, there are really 3 x aspects that are able to be modified:
1/ Firmware
2/ Adaptation channels
3/ long coding
Firmware is like the heart-beat of the module's life-force: this is the internal software that operates the procedures for controlling some aspect(s) of the car. Firmware determines how the module will operate and the module's firmware relies on "inputs" to tell it about the external world: how the car is physically configured and what"parameters" the module is to use in certain circumstances (like how to turn ON/OFF each of the car's 35 x exterior lights). Some diagnostic cables like VCP can change firmware, but not OBD11, or VCDS.
The "inputs" that the firmware relies upon are "2 (Adaption)" and "3 (Long coding)" above. Now, I'm not sure what particular distinction VW officially uses between "adaptation channels" and "long coding", but my guess from observations is as follows:
Long coding are the software switches that tell the firmware what physical sensors/physical switches are installed in the car. For example, when a light-sensor is installed, a long coding Byte/Bit has to be set to tell the control module firmware to start measuring the sensor output and to do stuff to control the car's lighting.
Adaptation channels are generally different sorts of "inputs" that tell the module how-to-behave. For example, Leuchte programming is done by changing adaptation channels - these channels tell the module what function to allocate to each lamp and what level of illumination to give to that lamp.
I have added to the list Basic Settings
thanks to DV52 for definition
Basic settings are just another form of "input" to the closed-loop system. Speaking generally again, the more sophisticated sensors on a car need a initial set of parameters to to establish a reference point. The module's firmware uses this data as a "starting-point" for the feedback process in later operation.
For example, changing some adaptation channel values in the BCM will lose the level-horizon settings for the range-control motors on the headlights. The Basic settings procedure (for the modules @ address hex55) re-establishes the sensor's setting for level-ground. When these modules are taken from stock at the VW factory - each car goes through this basic setting procedure to establish zero degree tilt - as a reference setting. Once the module knows where zero-tilt is, it can accurately measure +ve/-ve angles.
and Readiness
thanks to DV2 for definition
Readiness is a group of "parameters" (usually 8 x binary Bits) in the engine module which indicate the health of the car's emission systems. A state of 0 means "fail" and 1 means "passed". Whenever you bulk clear DTCs, ALL 8 x bits are set to the "fail" state - if your car doesn't have all 8 x emission test capabilities, those Bits will automatically be reset to 1.
for completeness and have done it in this textual manner rather than excel to make it easier for people who use the search facility to find the relevant information.
Live Data
As the name implies these are just labels that allow you to watch and record (via charts) the live data where it is supported on your car
Explanation of acronyms
As some of these acronyms are in German for non German users its not always easy to work them out so i have listed all the one's I am aware of along with any others just to keep them all in one place. Please add any you want help with or know answers for below.
Control units in detail below:
Live Data
A/C compressor torque
Absolute intake pressure
Absolute load value
ACC variants
ACC variants (coding)
Accelerator pedal, sensor voltage 1
Accelerator pedal, sensor voltage 2
Accelerator position
Accelerator position 2
Activation of fuel pump electronics
Activation of oil pressure switch valve
Activation of oxygen control after main cat
Activation radiator shutter result
Active brake system status
Adapt of angle sensor 1 f throttle valve
Adapt of angle sensor 2 f throttle valve
Adaptation of angle sensor 1 throttle valve, emerg. air gap
Adaptation of angle sensor 2 throttle valve, emerg. air дар
Adaptation of kick-down shifting point
Adaptation of load shift flaps
Adaptation of loss torque
Adaptation of throttle valve
Adaptation status for transmission neutral position sensor
Adaptation val cyl 1 with fast diagnosis
Adaptation val cyl 1 with slow diagnosis
Adaptation val cyl 2 with fast diagnosis
Adaptation val cyl 2 with slow diagnosis
Adaptation val cyl 3 with fast diagnosis
Adaptation val cyl 3 with slow diagnosis
Adaptation val cyl 4 with fast diagnosis
Adaptation val cyl 4 with slow diagnosis
Adaptive long-term value of mix. condition after cat. conv
Air mass, specified value
Allocation of oxygen sensors
Ambient air pressure
Average of ignition timing angle delay adjustment
AVS error status of last switch-over AVS stroke direction
AVS error status of last switch-over standard stroke direction
AVS operating condition
AVS overflow meter for all switch-overs
AVS switch-over meter for reg activation of curr. drive cycle
AVS switch-over meter, total
AVS valve stroke position, current
Brake light switch status
Brake system vacuum pump
Brake test switch status
Calculated oil temperature
Camshaft adaptation exhaust bank 1, phase position
Camshaft adaptation intake bank 1, phase position
Camshaft adjustment intake bank 1, activation
Camshaft adjustment intake bank 1, actual value
Camshaft adjustment intake bank 1, specified value
Camshaft adjustment, exhaust, bank 1, activation
Camshaft adjustment, exhaust, bank 1, actual value
Camshaft adjustment, exhaust, bank 1, specified value
Camshaft speed (RPM)
Cause for cancellation
CCS Switch
Charge air pressure control valve activation pulse duty factor
Charge air pressure control valve adaptation performed
Charge air pressure control valve position, actual value
Charge air pressure control valve position, target value
Charge air pressure control valve uncond voltage sensor
Charge air pressure control valve voltage, position closed
Charge air pressure control valve voltage, position open
Charge air pressure sensor, unconditioned voltage
Charge air pressure specified value
Charge air pressure, actual value
Charge press. ctrl.
Charge press. ctrl., adapt. higher than max. threshold
Charge Pressure Actuator, acknowledgment
Charge pressure actuator, actual position
Charge pressure actuator, adaptation for lower stop
Charge pressure actuator, adaptation for upper stop
Charge pressure actuator, operating status
Charge pressure actuator, specified position
Charge pressure actuator, specified value
Charge pressure control, less than min. threshold adaptation
Chg. press. ctrl. valve, sensor voltage max. value
Close cam shaft angle at quantity control valve
Clutch position sensor
Contact for tank leak test
Control module distance driven
Control module temperature
Coolant circulation pump, activation
Coolant fan 1, activation
Coolant fan 2, activation
Coolant shut-off valve
Coolant temp at radiator output, unconditioned voltage
Coolant temperature
Coolant temperature at engine outlet, specified value
Coolant temperature at engine outlet, unconditioned voltage
Coolant temperature at engine start
Coolant temperature at radiator outlet, actual value
Coolant temperature at radiator output, specified value
Coolant temperature difference between engine and radiator
Counter for fuel entry in oil
Crankshaft speed (RPM)
Cruise control switch actuation
Cruise Control System (CCS), status
Cruise control system, permanent deactivation
Cruise Control System, specified speed
Cruise control system, temporary deactivation
Current of oxygen sensor bank 1 sensor 1 (broadband sensor)
Currently running routine
Dist. driven with exh. Malfunction Indicator Lamp activated
Distance driven since erasing DTC memory
Driver request torque
Driver request torque
Drivetrain coord, cause of shutdown in cruise cntr and ACC mode
Drivetrain coordinator, ACC fault status
Drivetrain coordinator, brake fault status
Drivetrain coordinator, brake function status
Dynamic average of ignition timing angle delay adjustment
Dynamic factor 02 sensors bank 1 or bank 3 before cat. conv.
Engine mount 1
Engine mount 2
Engine oil temperature
Engine reverse rotation recognition
Engine shut-down overrides
Engine speed
Engine starting requirements
Engine status
Engine temp. management actuator, duty cycle activation
Engine temp. management actuator, raw value
Engine temp. mangmt. actuator, actual value of angle
Engine temp. mangmt. actuator, specified value of angle
Engine temper.
managem.actuator adaptation, result adaptation
Engine temperature management actuator
Engine temperature management actuator, after-run stop
Engine temperature management actuator, stop open
Engine torque
Engine-drag torque
Equivalence ratio target value
Error counter bad fuel
Error status for start-stop related sensors
Exhaust flap bank 1
Exhaust flap bank 2, activation
Exhaust flap, activation
Exhaust gas temperature before catalytic converter
Exhaust gas temperature sensor 1
Exhaust temperature 1 bank 1
Fuel consumption
Fuel high pressure sensor, unconditioned voltage
Fuel high pressure, actual value
Fuel low pressure sensor, unconditioned voltage
Fuel low pressure, actual value
Fuel Metering Valve
Fuel Pressure
Fuel temperature
Gear position sensor, current value
Gear position sensor, gear position valid
Gear position sensor, last valid value
Gear position sensor, raw value
Generator, load signal
Heat quantity that was transported via the catalytic converter
Heated oxygen sensor bank 1, sensor 1, activation
Heated oxygen sensor bank 1, sensor 1, resistance
Heated oxygen sensor bank 1, sensor 2, activation
Heated oxygen sensor bank 1, sensor 2, resistance
Heater support pump, spec. value
Hide cylinder
High fuel pressure, control deviation
High fuel pressure, specified value
High pressure pump injection volume
High pressure pump injection volume control deviation
High pressure regulation, adaptation value
Idle speed specified value
Ignition angle of current cylinder, actual value
Ignition timing adjustment cylinder 1
Intake air temperature
Intake air temperature, unconditioned voltage
Intake manifold pressure raw value
Intake manifold pressure, corrected
Intake manifold pressure, target value
Intake manifold Runner Control (IMRC), acknowledgment
Intake manifold Runner Control (IMRC), activation
Intake manifold runner control (IMRC), offset closed
Intake manifold Runner Control (IMRC), unconditioned voltage
Knock sensor, cylinder 1, voltage
Knock sensor, cylinder 2, voltage
Knock sensor, cylinder 3, voltage
Knock sensor, cylinder 4, voltage
Limitation, torque
Limitation, torque of clutch protection
Load shift flaps, actual value
Load shift flaps, specified value
Long term adaptation of mixture formation bank 1
Long term adaptation of oxygen sensor control, bank 1
Long-term adaptation of intake manifold injection
Long-term adaptation of intake manifold injection in idle
Long-term fuel trim bank 1 at idle
Lost torque adaptation A/ C compressor and driving mode
Lost torque adaptation driving mode
Lost torque adaptation,
idle
Low fuel pressure adaptation value for EFP
Low fuel pressure, specified value
Manifold absolute pressure sensor, unconditioned voltage
Mass flow through throttle valve
Mean engine air mass
Mean injection quantity
Median injection timing
Median vehicle speed
Misfire sum counter
Misfires per 1000 revolutions of cyl. 1 intake manif. injection
Misfires per 1000 revolutions of cyl. 2 intake manif. injection
Misfires per 1000 revolutions of cyl. 3 intake manif. injection
Misfires per 1000 revolutions of cyl. 4 intake manif. injection
Misfires per 1000 revolutions of cylinder 1
Misfires per 1000 revolutions of cylinder 2
Misfires per 1000 revolutions of cylinder 3
Misfires per 1000 revolutions of cylinder 4
Mixture adaptation factor at idle speed
Mixture adaptation factor at partial load
Mixture deviation in adapted partial load range
Monitoring status in current driving cycle
Monitoring status of additional Onboard Diagnosis
Monitoring status Onboard Diagnosis camshaft and knock sensor
Monitoring status since erasing DTC memory
Neutral position sensor, adapted transmission angle
Neutral position sensor, current transmission angle
Neutral position sensor, lower adaptation value
Long Coding 1 - Please note where no description is shown at the time of putting this together there were not details, Please add any information you can to help us update.
Byte 00
Bit 0 Manufacturer
Bit 1 Manufacturer
Bit 2 Manufacturer
Bit 3 Body Type - Limousine/Sedan
Bit 4 Body Type
Bit 5 Body Type
Bit 6 Market Europe/Rest of World
Bit 7 Market
Byte 01
Bit 0 Transmission Type - Direct Shift gearbox (DSG)
Bit 1 Transmission Type
Bit 2 Transmission Type
Bit 3 Transmission gear ratio - 6 speed
Bit 4 Transmission gear ratio
Bit 5 Transmission gear ration
Bit 6
Bit 7
Byte 02
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 03
Bit 0
Bit 1 - Climate Control Bidirectional Climate Control
Bit 2 - Climate Control
Bit 3 - Auxiliary Heater - Not Installed
Bit 4 - Airbags - Installed
Bit 5 - Parking Aid - Installed
Bit 6
Bit 7
Byte 04
Bit 0 - Cooling fan - 2 continuously fans
Bit 1 - Cooling fan
Bit 2 - Cooling fan
Bit 3
Bit 4
Bit 5 - water pump - 1 electric water pump
Bit 6 - water pump
Bit 7
Byte 05
Bit 0 - Right hand drive - Not active
Bit 1 - All wheel drive - Not Installed / Installed
Bit 2 - Anti lock breaking system (ABS) - Installed / Not Installed
Bit 3
Bit 4 - Trailer - Installed / Not Installed
Bit 5 - Cruise control system - Adaptive Cruise Control with Front Assist
Bit 6 - Cruise control system
Bit 7
Byte 06
Bit 0 - Stop/Start system installed
Bit 1
Bit 2 - Speed Limiter - Installed / Not Installed
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 07
Bit 0 - Emissions DU6(PR 7MK)
Bit 1 - Emissions
Bit 2 - Emissions
Bit 3 - Flexible Service Interval (Long Life) - Active / Not Active
Bit 4
Bit 5
Bit 6
Bit 7
Byte 08
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4 - Keyless entry system - Installed / Not Installed
Bit 5 - Electronic parking brake - Installed / Not Installed
Bit 6
Bit 7
Byte 09
Bit 0
Bit 1
Bit 2 - Exhaust Valves - Disabled
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Adaptions
use following link to spreadsheet with all adaption channel details LINK
Adaptation of Fuel Pump (FP)
Automatic test sequence
Automatic test sequence_1
Automatic test sequence_2
Camshaft adjustment test
Catalytic converter regeneration
Checking secondary air system
Clutch engagement point adaptation
Clutch valve calibration
Cooling oil valve calibration
Distance sensor calibration
Drain fuel tank
Engagement point adaptation
Engine shut-down
Engine speed increase (end of line)
Engine temperature management actuator
Erase statistic memory
First adaptation of charge pressure actuator
Initial fuel filling --- PLEASE NOTE YOU NEED TO CHANGE DIAGNOSTIC MODE TO EOL (End Of assemby Line) for this to work.
Main pressure valve calibration
Mixture adaptation and intake manifold injection test
Mixture adaptation partial load
Oxygen sensor after catalytic converter, readiness for oper.
Oxygen sensor aging test bank 1 before catalytic converter
Position test of end stops of charge pressure actuator
Pressure release in rail
Read out system status ctrl module for fuel tank leak diagnost.
Resetting of all adaptation values
Service position
Tank ventilation valve check
Test charge pressure regulation
Test of camshaft adjustment exhaust
Test of camshaft adjustment intake
Test of cat. converter for back pressure
Test of catalytic converter bank 1
Test of cylinder-individual mixture deviation
Test of knock sensors
Test of oil pressure valve change-over
Test of oxygen sensor
Test of oxygen sensor aging after cat bank 1
Test of oxygen sensor control.
Test of oxygen sensor heater in deceleration mode
Test of oxygen sensor in deceleration mode
Test of oxygen sensors bank 1, Delta-Lambda
Test of throttle valve adaptation
Test, charge pressure actuator
Timing chain elongation, correction after other work
Timing chain elongation, reset after chain replacement
Transmission neutral position sensor adaptation
Output test
Exhaust bypass valve
Exhaust camshaft adjustment, bank 1
Exhaust flap
Exhaust flap bank 2
Fan 1 control circuit
Fuel pump electronics
Heater support pump
Inject. valve, intake manifold injection 1
Inject. valve, intake manifold injection 2
Inject. valve, intake manifold injection 3
Inject. valve, intake manifold injection 4
Intake camshaft adjustment, bank 1
Intake Manifold Runner Control (IMRC)
Motronic engine control module power supply relay
Oil pressure regulation valve
Quantity control valve
Radiator bypass change-over valve
Supply relay for engine components
Transmission coolant valve
Turbocharger recirculation valve
Readness
Monitoring status since erasing DTC memory
Number of emission relevant DTC memory entries
Malfunction indicator lamp
Monitoring of ignition misfires
Monitoring of fuel system
Monitoring of entire system
Catalytic converter monitoring
Monitoring of catalytic converter at operating temperature
Monitoring of tank ventilation system
Monitoring of Secondary Air Injection (AIR) System
Monitoring of oxygen sensor
Monitoring of oxygen sensor heater
Monitoring of EGR and camshaft adjustment
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Live data
Accelerator position
Actual position of gear adjuster B
Actual position of gear positioner A
Actual position of gear positioner C
Actual position of gear positioner D
AD value 1 of actual position of gear positioner
AD value 1 of actual position of gear positioner
AD value 1 of actual position of gear positioner
AD value 1 of actual position of gear positioner
Analysis 1
Analysis 10
Analysis 11
Analysis 12
Analysis 2
Analysis 21
Analysis 22
Analysis 23
Analysis 24
Analysis 25
Analysis 26
Analysis 29
Analysis 3
Analysis 31
Analysis 33
Analysis 34
Analysis 35
Analysis 37
Analysis 39
Analysis 40
Analysis 41
Analysis 42
Analysis 43
Analysis 44
Analysis 5
Analysis 53
Analysis 54
Analysis 55
Analysis 56
Analysis 57
Analysis 58
Analysis 61
Analysis 63
Analysis 65
Analysis 66
Analysis 7
Analysis 71
Analysis 8
Analysis 9
Brake light switch
Brake test switch
CAN bus installation information
Clutch 1 Adaption kiss point part 1 success counter
Clutch 2 Adaption kiss point part 1 success counter
Clutch temperature air / splash oil
Control module temperature
Current of main pressure valve
Current of valve for clutch 1 actual value
Current of valve for clutch 1 specified value
Current of valve for clutch 2 actual value
Current of valve for clutch 2 specified value
Currently running routine
Display of driving mode in instrument panel
Display of gear in instrument panel
Driving direction
Driving profile selection
Driving strategy driving portions in D or S w/ CCS
Driving strategy driving portions in S w/o CCS
Driving strategy driving portions in Tiptronic
Driving strategy transmission mileage
Duty cycle of gear solenoid valve A
Duty cycle of gear solenoid valve D
Engine speed
Engine stop prohibitions
Engine torque, qualification
Kick-down status
Lower adapted coupling point K1 from kiss point adaptation
Lower adapted coupling point K2 from kiss point adaptation
Mechatronics identification DQ250
Number of ignition cycles
Number of prevented stop processes (statistics)
Number of standard trips
Overall software description
Parameter set description
Pressure of clutch 1, actual value
Pressure of clutch 2, actual value
Production data transmission
Pulse duty factor of gear solenoid valve B
Pulse duty factor of gear solenoid valve C
Roller test bench mode, functional
Security Access: number of invalid keys
Selector lever information
Selector lever position
Selector lever position made plausible
Specified torque clutch 1
Specified torque clutch 2
Status of basic setting
Status of selector lever lock
Status of starter lock
Stop process prevented
Tiptronic downshift
Tiptronic upshift
Transmission fluid temperature
Transmission input speed
Transmission input speed (RPM) shaft 1
Transmission input speed (RPM) shaft 2
Transmission output speed (RPM) shaft 1
Transmission output speed (RPM) shaft 2
Transmission specified idle RPM
Upper adapted coupling point K1 from microslip adaptation
Upper adapted coupling point K2 from microslip adaptation
Vehicle speed
Voltage terminal 15
Voltage terminal 30
Long Coding 1
Byte 00
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 01
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Adaptations
Roller test bench mode, functional
Basic Settings
Basic setting of transmission
Calibration of synchro-points
Erase counter for start and stop processes
Reset CAN installation info
Reset clutch characteristic curve
Reset driving percentages per selector level position
Reset gear selector data
Reset logging data for clutch 1
Reset logging data for clutch 2
Resetting of all adaption values
Start double clutch fast adaptation.
Output Test
Gear Shift Lock Solenoid Control Circuit.
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Live data
All Wheel Drive (AWD)
Analysis 101
Analysis 102
Analysis 103
Analysis 104
Analysis 105
AUTO HOLD
Bleed brake system (rework bleeding)
Brake disk drying
Brake system button
Brake system sensor
CAN input signal(s) status
CAN output signal(s) status
CAN signals
Communication status of data bus 1
Counter steer support
Data logger triggering
Dynamic starting assist
Electromechanical parking brake
Electromechanical parking brake, parking brake motors
Electronic Differential Lock
Hardware version for suppliers
Hill descent control
Hill-start assistant
Hydraulic brake booster
Indicator light in the button for electromech. parking brake
indicator lights
Internal measured values
Left front ABS wheel speed sensor
Left rear ABS wheel speed sensor
Mode
Number of prevented stop processes
Number of requested start processes
Parking brake
Prevented stop processes (ring memory)
Pump load counter
Requested start processes (ring memory)
Right front ABS wheel speed sensor
Right rear ABS wheel speed sensor
Roll-over protection
Security Access: number of invalid keys
Sensor for roof rack recognition
Start process requested
Start-stop
Start-stop conditions
Start-stop enabling
Start-stop function, coding information
Stop process prevented
Supply voltages
Text display in instrument panel insert
Tire pressure monitoring display
Traction control system sensor
Vacuum sensor
Vehicle and trailer stabilization
Long Coding 1
There are 30 Byte's (0 - 29) but currently non of them have any narrative.
Adaptations
use following link to spreadsheet with all adaption channel details LINK
Basic Settings
ASR and ESP function deactivation
Basic setting for brake pressure sensor
Basic setting for inlet/cut-out valves
Basic setting of ESP sensor unit
Bleed brakes
Clutch pedal threshold (search for kiss point)
Deactivate dynamometer mode
Electro-mechanical parking brake function test
End lining change mode
Engage Haldex clutch
Erase counter for start and stop processes
Fill/bleed brake system
Hydraulic connection replacement check
Open Haldex clutch
Reset tire pressure monitoring display warnings
Reset to factory setting
Reset to factory setting of tire pressure monitory display
Resetting of all adaptation values
Roller test bench mode
Shut off longitudinal acceleration monitoring
Start lining change mode
Test of emergency brake warning display
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
Diagnosis mode for safety-related systems
End of assembly line mode (EOL)
IO Test Session
Development mode
Live data
A/C clutch
Actual value for fresh air/ recirculation air flow flap
Air quality status
Auxiliary heater, controlled
Auxiliary heater, in stages
Blower current
Blower reduction
Blower status
Blower voltage, actual value
Blower voltage, specified value
CAN input signal(s) status
CAN output signal(s) status
Center push-and-rotary knob counter
Compressor current, actual value
Compressor current, specified value
Compressor load
Compressor shut-off condition, last
Compressor shut-off requirement
Compressor shutoff requirement, antepenultimate
Compressor shut-off requirement, penultimate
Compressor speed
Compressor status, global
Compressor status, internal
Compressor, energy monitor
Convertible top status
Coolant change-over valve
Coolant change-over valve
Coolant change-over valve
Coolant circulation pump
Coolant circulation pump
Coolant circulation pump
Coolant fan activation, actual value
Coolant fan activation, specified value
Coolant temperature
Counter of compressor switch-offs
Data logger triggering
Defroster flap, actual value
Defroster flap, specified value
Defroster flap, stop closed
Defroster flap, stop open
Driving profile selection
Driving time remaining for basic setting of compressor run in
Engine speed
Engine start using startstop function
Engine stop using startstop function
External humidity sensor
Footwell vent temperature
Fresh air stop for fresh air/ recirculation air flow flap
Front air distribution flap, actual value
Front air distribution flap, air outlet stop
Front air distribution flap, footwell air outlet stop
Front air distribution flap, specified value
Humidity sensor, internal
HV heater shut-off condition
HV heater status, global
HV heater status, internal
HV heater temperature
Interior temperature
Left front vent temperature
Left heated seat stage
Left push-and-rotary knob counter
Left rear seat heater
Left temperature flap - actual value
Left temperature flap - specified value
Left temperature flap, cold stop
Left temperature flap, warm stop
No. of unscheduled ECU resets
Number of prevented stop processes
Number of requested start processes
Outside air temperature
Outside air temperature internally calculated
Potentiometer for rear vent temperature
Pressing a button
Prevented stop processes (ring memory)
Rear temperature flap, actual value
Rear temperature flap, cold stop
Rear temperature flap, specified value
Rear temperature flap, warm stop
Rear vent temperature
Recirculated air stop for fresh air/recirc air flow flap
Refrigerant cut-off valve 1
Refrigerant cut-off valve 2
Refrigerant pressure
Relay for standstill A/C, status
Remaining time of parking heater/ventilation operation
Requested start processes (ring memory)
Right front vent temperature
Right heated seat stage
Right push-and-rotary knob counter
Right rear seat heater
Right temperature flap, actual value
Right temperature flap, cold stop
Right temperature flap, specified value
Right temperature flap, warm stop
Specified value for fresh air/recirc air flow flap
Standard - ambient data 1
Start process requested
Start-stop conditions
Start-stop enabling
Start-stop function, coding information
Status of actuator test
Status of basic setting
Status of recirculation air
Stop process prevented
Sun intensity left
Sun intensity right
Supply voltage for external components
System run time
Temp sensor 1
Temp sensor 2
Temp sensor 3
Temp sensor 4
Temp sensor 5
Temperature after evaporator
Terminal 58xd dimmer
Terminal 58xs dimmer
Time since ignition off
Vehicle speed
Voltage terminal 30
Long Coding 0
===========
Long Coding 1
==========
Byte 00
Bit 0 - Body Type
Bit 1 - Body Type
Bit 2 - Body Type
Bit 3 - Body Type
Bit 4
Bit 5
Bit 6
Bit 7
Byte 01
Bit 0 - Vehicle manufacturer
Bit 1 - Vehicle manufacturer
Bit 2 - Vehicle manufacturer
Bit 3 - Vehicle manufacturer
Bit 4 - Steering
Bit 5 - Steering
Bit 6 - Steering
Bit 7 - Steering
Byte 02
Bit 0 - Fuel Type
Bit 1 - Fuel Type
Bit 2 - Fuel Type
Bit 3 - Fuel Type
Bit 4 - Engine type
Bit 5 - Engine type
Bit 6 - Engine type
Bit 7 - Engine type
Byte 03
Bit 0 - Number of cylinders
Bit 1 - Number of cylinders
Bit 2 - Number of cylinders
Bit 3 - Number of cylinders
Bit 4 - Roof Type
Bit 5 - Roof Type
Bit 6 - Roof Type
Bit 7 - Roof Type
Byte 04
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4 - Re circulation air settings after ignition cycle
Bit 5 - Re circulation air settings after ignition cycle
Bit 6 - Air circulation type
Bit 7 - Air circulation type
Byte 05
Bit 0 - Glass type
Bit 1 - Glass type
Bit 2 - Glass type
Bit 3 - Glass type
Bit 4 - Auxiliary heater
Bit 5 - Auxiliary heater
Bit 6 - Auxiliary heater
Bit 7 - Auxiliary heater
Byte 06
Bit 0 - Parking heater
Bit 1
Bit 2
Bit 3
Bit 4 - Coolant type
Bit 5
Bit 6
Bit 7
Byte 07
Bit 0 - Climate modes - Active, Not Active
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 08
Bit 0 - Front sensor camera heating - Installed, Not Installed
Bit 1
Bit 2
Bit 3
Bit 4, 5, 6 & 7 Start/Stop function - Installed
Byte 09
Bit 0, 1 - Air quality sensor - External air quality sensor installed
Bit 2, 3 - Internal humidity sensor - Installed
Bit 4, 5 - External humidity sensor - Installed, Not Installed
Bit 6
Bit 7
Byte 10
Bit 0 - 7 No description
Byte 11
Bit 0,1 - Windshield heating - Installed,Not Installed
Bit 2,3 - Steering wheel heater - Installed, Not Installed
Bit 4 - Frequency sift for blower control module - Installed, Not Installed
Bit 5
Bit 6 - Blower status display in auto mode - Active, Not Active
Bit 7
Byte 12
Bit 0 - 3 Air distribution/Blower adjustment - Normal
Bit 4 - 7 Temperature adjustment - Normal, Cold (Hot Countries)
Byte 13
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4 - 5 - C02 compressor activation reduction - Activated
Bit 6
Bit 7
Byte 14
Bit 0
Bit 1
Bit 3 - 4 - Window condensation reduction - Not Active
Bit 5 - 7 - Blower control for manual adjustment - Fan Setting.
Byte 15
Bit 0 - 7 No descriptions
Adaptations
use following link to spreadsheet with all adaption channel details LINK
Basic Settings
Adapt flap end stops
Compressor run in, automatic start
Compressor run in, manual start
Erase counter for start and stop processes
Reset to factory setting
Resetting of all adaptation values
Resetting of all adaptations
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Security Codes
Access and start authorization
Activation current
Activation for signal horn
Alarm horn for anti-theft warning system
Ambience lighting
Ambient lighting
Anti-theft warning system, history data
Back-up light
Brake light
Brake light switch
Button in center console
Central locking button
Central locking history
data
Comfort function history data
Convertible top status
Counter of component protection malfunctions
Data logger triggering
Daytime running lights
Daytime running lights
Door status, driver side rear
Door status, frt. pass. side rear
Driver info
DWA History data for alarm triggering
DWA Interior monitoring
DWA Interior monitoring/ vehicle inclination sensor button
DWA Number of alarms triggered in anti-theft warn.system sensor
DWA Sirens / alarm horn for anti-theft warning system
DWA Vehicle inclination sensor
DWA Vehicle inclination sensor, angle
Emergency flasher button
Energy management
Fog light
Footwell light
Front driver side door status
Front passenger side door status
Front windshield wiper module
Garage door opener, country code
Garage door opener, last programming
Garage door opener, programming channel 1
Garage door opener, programming channel 10
Garage door opener, programming channel 11
Garage door opener, programming channel 12
Garage door opener, programming channel 13
Garage door opener, programming channel 14
Garage door opener, programming channel 15
Garage door opener, programming channel 2
Garage door opener, programming channel 3
Garage door opener, programming channel 4
Garage door opener, programming channel 5
Garage door opener, programming channel 6
Garage door opener, programming channel 7
Garage door opener, programming channel 8
Garage door opener, programming channel 9
Garage door opener, reset counter
Garage door opener, second-to-last progr.
Garage door opener, supply voltage
Garage door opener, thirdto-last progr.
Head area heater
High beam
Humidity sensor, internal
Identification of parameterization
Interior light
Interior lighting
LED bar LIN master
LED bar LIN slave
Left cabin heater
Left front heated seat, status
Left seat backrest fan 1
Left seat cushion fan 1
Light recognition sensor
Light sensor
Light switch position
Low beam
Luggage compartment light
Multicontour seat frt.pass. side
Multicontour seat, driver's side
Operating current, light driver
Outside air temperature
Parking light
Parking light
Personalized settings
Play protection for central locking
Rain recognition sensor
Rear entry light
Rear fog light
Rear spoiler
Rear spoiler history data
Rear window defogger
Rear Window Wiper
Reversing light switch
Right cabin heater
Right front heated seat, status
Right seat backrest fan 1
Right seat cushion fan 1
Search lights
Security Access: number of invalid keys
Spray nozzle heater
Static AFS light
Status of actuator test
Status of basic setting
Sunroof
Sunroof front closed position switch
Sunroof shade
Sunroof shade switches
Supply voltage, terminal 30
Switch for engine hood
Tailgate condition
Tank cap lock
Terminal signals and start release
Turn signal
Vehicle key with remote control
Vehicle positioning system
Vehicle speed
Window washer system
Windshield defogger
Cycle_Protection_Counter
Ecu_Intern_Measurement_ Values_2
Entwicklermesswerte CONTI
Kopfraumheizung_Entwick lung
Lichtsensorparameter
LIN-Aktivitaet
Misc_wiper_values_1
misc_wiper_values_2
Mitsuba Wischermesswerte 1
Mitsuba Wischermesswerte 3
Monitor 1
Monitor 10
Monitor 2
Monitor 3
Monitor 4
Monitor 5
Monitor 6
Monitor 7
Monitor 8
Monitor 9
Parametermonitor_1
Parametermonitor_2
Parametermonitor_3
Parametermonitor_4
Parametermonitor_5
Parametermonitor_6
Parametermonitor_7
Parametermonitor_FF
Power up historie
Regensensorparameter
Resetcounter_EMW
RLS_Incidence_Counter
RLS_Rain_Sensor_Off_Just age
shadow_error_table
steuergeraetinterne Messwert (Zulieferer)
Temperaturen
UGDO_Control_Button
UGDO_Control Switchboar
values_motorloads
Versorgungspannungshistorie
Long Coding 0
==========
Long Coding 1
==========
Byte 00
Bit 0 - 1 Steering (which side)
Bit 2 - 3 Manufacturer (Seat, VW, Skoda, Audi)
Bit 4 - 7 No description
Byte 01
Bit 0 - Keyless entry system (KESSY)
Bit 1 - Trailer hitc control module
Bit 2 - 3 No description
Bit 4 - Roof control module
Bit 5 - 7 No description
Byte 02
Bit 0 - 2 Lighting
Bit 3 - High traction drop downs (HTDD)
Bit 4 - Automatic transmission installed
Bit 5 - 7 no description
Byte 03
Bit 0 - No description
Bit 1 - Climate control
Bit 2 - 4 Seat Heating
Bit 5 - 7 Window Heating
Byte 04
Bit 0 - No description
Bit 1 - Start/Stop function
Bit 2 - 5 no description
Bit 6 - Ambient temperature sensor installed
Bit 7 - Brake pad wear sensor
Byte 05
Bit 0 - Operating and display protocol (BAP)
Bit 1 - Lock/unlock button directly connected to body control module (BCM)
Bit 2 - Lock/unlock toggle button
Bit 3 - 5 No description
Bit 6 - Rear power windows
Bit 7 - Footwell lights
Byte 06
Bit 0 - 1 Light sensor
Bit 2 - 4 no description
Bit 5 - 6 Xenon shutter
Bit 7 - no description
Byte 07
Bit 0 - 1 no description
Bit 2 - Light switch via LIN databus
Bit 3 - Light switch with front fog lights
Bit 4 - Light switch with rear fog lights
Bit 5 - Light switch with assistance driving light (ADL)
Bit 6 - Light switch with position lights
Bit 7 - Humidity sensor
Byte 08
Bit 0 - 1 - Market / country
Bit 2 - Personalization profiles active
Bit 3 - 5 no description
Bit 6 - Central locking without safe function
Bit 7 - no description
Byte 09
Bit 0 - 1 no description
Bit 2 - Rear lid lock with prelatch
Bit 3 - 5 no description
Bit 6 - Door locks without safe function for North American region
Bit 7 - Rear passenger doors
Byte 10
Bit 0 - 5 no description
Bit 6 - Hood switch
Bit 7 - no description
Byte 11
Bit 0 - 1 no description
Bit 2 - Rear lid remote button directly connected to body control module (BCM)
Bit 3 - 6 no description
Bit 7 - Anti theft system deactivatoin button directly connected to body control module (BCM)
Byte 12
Bit 4 - Anti theft system alarm horn/sounder
Bit 5 - Anti theft system inclination sensor
Bit 6 - Start anti theft alarm delay with mechanical door opening
Bit 7 - Anti theft system interior monitoring
Byte 13
Bit 0 - 1 no description
Bit 2 - Rear wiper Installed
Bit 3 - Headlight washers Not Supported by this control unit
Bit 4 - Heated front washer jets
Bit 5 - 7 no description
Byte 14
Bit 0 - Coolant fluid level sensor installed
Bit 1 - Brake fluid level sensor installed
Bit 2 - Washer fluid level sensor installed
Bit 3 - 7 no description
Byte 15
Bit 0 - 2 no description
Bit 3 - Start stop system deactivation button installed
Bit 4 - no description
Bit 5 - Drive select button
Bit 6 - no description
Bit 7 - Drive select button without function light - This turns off the Cupra mode button going yellow when in cupra mode.
Byte 16
Bit 0 - 1 no description
Bit 2 - Auxiliary/Parking heater
Bit 3 - Electric steering column lock (ESCL) Installed
Bit 4 - External consumer via terminal 30g
Bit 5 - 7 no description
Byte 17
Bit 0 no description
Bit 1 - Ambient door panel lights installed
Bit 2 - Ambient cup holder lights installed
Bit 3 - Ambient footwell lights installed
Bit 4 - Ambient speaker lights installed
Bit 5 - 6 no description
Bit 7 - Drive Profiles
Byte 18 - Hex 00
Bit 0 - 7 no description
Byte 19 - Hex 00
Bit 0 - 7 no description
Byte 20 - Hex 00
Bit 0 - 7 no description
Byte 21 - Hex 00
Bit 0 - 7 no description
Byte 22 - Hex 00
Bit 0 - 7 no description
Byte 23 - Hex 00
Bit 0 - 7 no description
Byte 24 - Hex 00
Bit 0 - 7 no description
Byte 25 - Hex 00
Bit 0 - 7 no description
Byte 26 - Hex 00
Bit 0 - 7 no description
Byte 27 - Hex 00
Bit 0 - 7 no description
Byte 28 - Hex 00
Bit 0 - 7 no description
Byte 29 - Hex 00
Bit 0 - 7 no description
Adaptations:
use following link to spreadsheet with all adaption channel details LINK
Basic Settings:
Automatic test sequence
Energy management
Rear windo defogger
Resetting of all adaptation values
Sunroof
Sunroof shade
Windshield defogger
Output Test:
Alarm horn for anthi-theft warning system
Ambience lighting
Ambient lighting
Back-up light
Brake light
Central locking rear
Component protectin
Compressor for multicontour seat drvr.side
Compressor for multicontour seat frt.pass.side
Consumer switch-off
Daytime running lights
Daytime running lights
DWA Interior monitoring indicator lamp
Emergency flasher indicator lamp
Fog light
Footwel light
Front windshield wiper module
Headlamp washer system
High beam
Indicator light for central locking
Indicator light in switch
Interior light
Left cabin heater
Left front heated seat
Left seat cushion fan 1
Lock unit for central locking in rear lid
Low beam
Luggage compartment light
Multicontour seat driver's side. syst. function test
Multicontour seat frt. pass. side. syst.function test
Output DTM LED bar
Parking Light
Parking light
Rear entry light
Rear fog light
Rear spoiler
Rear spoiler display
Rear window defogger
Rear window defogger indicator lamp
Rear window washer system
Rear window wiper module
Right cabin heater
Right front heated seat
Rightseat backrest fan 2
Search lights
Seat heater enabling
Signal horn activation
Spray nozzle heater
Static AFS Light
Sunroof
Sunroof shade
Tank flap
Turn signal
Windshield defogger
Windshield defogger indicator lamp
Windshield washer system
Ansteuerung KL_30G
Remotestart KL_15 Anforderung von FFB einschalten (HIGH-Pegal)
Window_Wiper_Front_Test
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Live data
Acceleration
Cause for prevention of activation at standstill
Cause for prevention of activation during travel
Cause of quick shutdown
Cause of soft shutdown
Control module temperature
Counter for internal faults
Counter of component protection malfunctions
Driving profile selection
Horizontal angle deviation
Individualization characteristic
Misalignment angle
Misalignment angle, fast algorithm
Public key for SWaP function
Radar status
Release code for a SWap function
Roller test bench mode, functional
Security Access: number of invalid keys
Status of all SWaP functions
Transport mode
Vehicle speed
Vertical angle deviation
Vertical deadjustment
Voltage terminal 15
ATB_Ausloesedokumentati on_Ereignis_0
ATB_Ausloesedokumentati on_Ereignis_1
Number_of_ACC_brakings _into_standstill
Number_of_ANB-CM
Number_of_ANB_partial_br akings
number_of_ANB_target_br eakings
Number_of_autonomous_ driveaways
Number_of_AWV1_prefills
Number_of_AWV2_brake_j olts
Number_of_AWV2_prewarnings
Number_of_driveaways_af ter_short_stop
Number_of_driver_intende d_driveaways
Operating_time_ACC
Operating_time_ACC_activ
Operating_time_ACC_activ e_in_standstill
Operating_time_AWV1_prefil
Operating_time_AWV3_EC
Operating_time_ECD_activ
Status ACC System
ZBR_Ausloesedokumentati on_Ereignis_0
ZBR_Ausloesedokumentati on_Ereignis_1
Long Coding 0
===========
Long Coding 1
===========
Byte 00
Bit 0 to 1 - Market, Rest of world is unticked.
Bit 2 to 7 - No Description
Byte 01
Bit 0 to 1 - Adaptive cruise control - installed or not installed
Bit 2 - Automatic drive away triggered by driver - Active, not active
Bit 3 - Automatic drive away after short stop - Active, not active
Bit 4 - 7 - No Description
Byte 02
Bit 0 - Electric parking brake - Installed, Not installed
Bit 1 - Drive select - Installed, Not Installed
Bit 2 - Front assist camera - Installed, Not Installed
Bit 3 - Trailer recognition control module - Installed, Not Installed,
Bit 4 - Automatic transmission - Installed, not installed
Bit 5 - 7
Byte 03
Bit 0 - 1 Display variant - Volkswagen, Audi
Bit 2 - 7
Byte 04
Bit 0 - 7 Stopping distance reduction - Standard
Byte 05
Bit 0 - 3 - Stopping distance reduction and city automatic Emergency brake assist - Standard
Bit 4 - 7 - No description
Byte 06
Bit 0 - 3 - Stopping distance reduction and city automatic Emergency brake assist
Bit 4 7 - No Description.
Adaptations:
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
Deletion of a SWaP function
Reactivation following multiple activation's emergency braking
Release of SWaP function
Reset Misalignment angle.
Output Test
Alignment procedure
Component protection
Heted Lens.
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
Diagnosis mode for safety-related systems
End of assembly line mode (EOL)
IO Test Session
Development mode
Live data
Adapted VIN
Adapting with deflected wheels
Analysis 1
Analysis 10
Analysis 11
Analysis 12
Analysis 13
Analysis 14
Analysis 15
Analysis 16
Analysis 17
Analysis 18
Analysis 19
Analysis 2
Analysis 20
Analysis 21
Analysis 22
Analysis 23
Analysis 24
Analysis 25
Analysis 26
Analysis 27
Analysis 4
Analysis 6
Analysis 7
Analysis 8
Analysis 9
Driving profile selection
Front left chassis acceleration sensor
Front right chassis accelerator
Initialization status
Internal damper mode
Left front dampening adjustment valve
Left front level control system sensor, raw value
Left front level ctrl sys sensor, adaptation value (deflected)
Left front level ctrl sys sensor, limit 1 (deflected)
Left front level ctrl sys sensor, limit 2 (deflected)
Left rear dampening adjustment valve
Left rear level control system sensor, raw value
Left rear level ctrl sys sensor, adaptation value (deflected)
Left rear level ctrl sys sensor, limit 1 (deflected)
Left rear level ctrl sys sensor, limit 2 (deflected)
Rear body acceleration sensor
Right front dampening adjustment valve
Right front level control system sensor, raw value
Right front level ctrl sys sensor, adaptation value (deflected)
Right front level ctrl sys sensor, limit 1 (deflected)
Right front level ctrl sys sensor, limit 2 (deflected)
Right rear dampening adjustment valve
Right rear level control system sensor, limit 1 (deflected)
Right rear level control system sensor, limit 2 (deflected)
Right rear level control system sensor, raw value
Right rear level ctrl sys sensor, adaptation value (deflected)
Security Access: number of invalid keys
Status of actuator test
Status of basic setting
Vehicle speed
Voltage supply for left sensor for level control system
Voltage supply for right sensor for level control system
Voltage terminal 30
Long Coding
Please note this control unit has no Long Coding function.
Adaptations
use following link to spreadsheet with all adaptations channel details and description of the possible options for each adaptation - LINK
Basic settings
Adapting with deflected wheels
Reset to as-delivered condition of control module manufacturer
Restore vehicle-specific data
Output test
Left front shock absorber hard
Left front shock absorber soft
Left rear shock absorber hard
Left rear shock absorber soft
Right front shock absorber hard
Right front shock absorber soft
Right rear shock absorber hard
Right rear shock absorber soft
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
Diagnosis mode for safety-related systems
End of assembly line mode (EOL)
IO Test Session
Development mode
Please be very very careful when doing any changes to this module as it is possible to disable the car.
Subsystems
SideSensor_Df
SideSensor_Pf
SideSensor_Dr
SideSornsor_Pr
FrontSensor_D
Live data
Airbag deactivation status
ass. side airbag igniter 2 ohm value
ass. side airbag igniter ohm value
ass. side rear belt tensioner igniter ohm value
ass. side side airbag igniter ohm value
assenger side 3rd row seat belt switch
Battery open circuit igniter ohm value
Counter of component protection malfunctions
Data logger triggering
Driver airbag igniter
Driver belt tensioner ohm value
Driver head curtain airbag igniter
Driver knee airbag igniter
Driver seat belt switch
Driver seat belt tensioner igniter 2
Driver seat position sensor current value
Driver side 3rd row seat belt switch
Driver side airbag igniter ohm value
Driver side belt force limiter igniter
Driver side belt force limiter igniter ohm value
Driver side belt tensioner igniter 2 ohm value
Driver side belt tensioner igniter ohm value
Driver side head curtain airbag igniter ohm value
Driver side knee airbag igniter ohm value
Driver side rear safety belt tension igniter
Driver side rear thorax airbag igniter
Driver side seat belt tension igniter
Driver thorax airbag igniter
Driver's side airbag igniter ohm value
Driving profile selection
Front passenger airbag igniter 2
Front passenger head curtain airbag igniter
Front passenger knee airbag igniter
Front passenger rear thorax airbag igniter
Front passenger side airbag igniter
Front passenger side belt force limiter igniter
Front passenger side safety belt switch
Front passenger side seat belt tension igniter
Front passenger side seat belt tensioner igniter 2
Frt.pass. belt tensioner ohm value
Frt.pass. seat position sensor current value
Frt.pass. side belt tensioner igniter 2 ohm value
Frt.pass. side belt tensioner igniter ohm value
Frt.pass. side head curtain airbag igniter ohm value
Frt.pass. side knee airbag igniter ohm value
Ft. pass.side rear airbag igniter ohm value
Igniter for batt. interrupt, high volt. batt. ohm value
Igniter for battery interrupt
Igniter for battery interrupt, high voltage battery
Key switch contact 1 ohm value
Key switch contact 2 ohm value
Key switch terminal 1
Key switch terminal 2
Left belt tensioner current consumption
Left belt tensioner supply voltage
Left belt tensioner temperature
Left belt tensioner tensioning cycles charac. curve 1
Left belt tensioner tensioning cycles charac. curve 2
Left belt tensioner terminal 15
Number of activations of pedestrian protection
Number of frontal crashes
Number of rear crashes
Number of rollover bar deployments
Number of rollover crashes
Number of side crashes driver side
Number of side crashes frt.pass. side
Occupation status, frt.passenger seat
Passenger airbag igniter
Passenger side rear safety belt tension igniter
Pedestrian protection trigger, driver side
Pedestrian protection trigger, driver side ohmic value
Pedestrian protection trigger, frt.pass. side
Pedestrian protection trigger, frt.pass. side ohmic value
Right belt tensioner current consumption
Right belt tensioner supply voltage
Right belt tensioner temperature
Right belt tensioner tensioning cycles charac. curve 1
Right belt tensioner tensioning cycles charac. curve 2
Right belt tensioner terminal 15
river side rear airbag igniter ohm value
river side rear belt tensioner igniter ohm value
Rollover protection trigger, driver side
Rollover protection trigger, driver side ohm value
Rollover protection trigger, frt.pass. side
Rollover protection trigger, frt.pass. side ohm value
Safety belt switch 2nd row center
Safety belt switch 2nd row driver side
Safety belt switch 2nd row driver side ohm value
Safety belt switch 2nd row frt.pass. side ohm value
Safety belt switch 2nd row frt.passenger side
Safety belt switch center 2nd row ohm value
Seat belt switch 3rd row driver side ohm value
Seat belt switch 3rd row frt.pass. side ohm value
Seat occupied recognition
Seat occupied recognition malfunction status
Seat occupied recognition ohm value
Seat position sensor, driver side
Seat position sensor, front passenger side
Security Access: number of invalid keys
side belt force limiter igniter ohm value
Supply voltage
Supply voltage, terminal 15
Workshop code for last rollover bar deployment
Long coding 1
Byte 00
Bit 0 - 7 No Description
Default Hex 98
Byte 01
Bit 0 - 7 No Description
Default Hex CC
Byte 02
Bit 0 - 7 No Description
Default Hex C0
Byte 03
Bit 0 - 7 No Description
Default Hex 00
Byte 04
Bit 0 - 7 No Description
Default Hex 00
Byte 05
Bit 0 - 7 No Description
Default Hex 00
Byte 06
Bit 0 - 7 No Description
Default Hex 00
Byte 07
Bit 0 - 7 No Description
Default Hex 00
Byte 08
Bit 0 - 7 No Description
Default Hex 5C
Byte 09
Bit 0 - 7 No Description
Default Hex 54
Byte 10
Bit 0 - 7 No Description
Default Hex 00
Byte 11
Bit 0 - 7 No Description
Default Hex CC
Byte 12
Bit 0 - 7 No Description
Default Hex 00
Byte 13
Bit 0 - 7 No Description
Default Hex 88
Byte 14
Bit 0 - 7 No Description
Default Hex 00
Byte 15
Bit 0 - 7 No Description
Default Hex 00
Byte 16
Bit 0 - 7 No Description
Default Hex 00
Byte 17
Bit 0 - 7 No Description
Default Hex 65
Adaptations
use following link to spreadsheet with all adaptations channel details including the settings on my car and if you download the spreadsheet you can also see all the possible options in column F by using the list button LINK
Basic Settings
Left belt tensioner serial number
Reset rollover bar deployments
Resetting seat occupied recognition
Right belt tensioner serial number
Seat occupied recognition serial number
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
Diagnosis mode for safety-related systems
End of assembly line mode (EOL)
IO Test Session
Development mode
Live data
Buttons for multi-function display
Cruise Control System (CCS), switch position
Data logger triggering
Driver assistance systems button
Front wiping, front washing
High beam
Rear wiping, rear washing
Security Access: number of invalid keys
Signal horn activation
SMLS p locked
steering wheel heater
Terminal signals and start release
Turn signals and parking lights
GRA_im_Blinkerhebel
GRA_im_dritten_Hebel
LRH
Long Coding 0
==========
Long Coding 1
==========
Byte 00
Bit 0 - no description
Bit 1 - Button for mutli function display/board computer
Bit 2 - Rear Wiper
Bit 3 - Button for driver assist systems
Bit 4 - 7 - Cruise control - Controlled via adaptive cruise control
Byte 01
Bit 0 - No description
Bit 1 - No description
Bit 2 - Speed limiter
Bit 3 - Button/leer diagnosis
Bit 4 - Selector lever locked in P
Bit 5 - 7 No description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
Resetting of all adaptation values
Output test
steering wheel heater
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Live data
Calculated volume
Cause for cancellation
Charge air pressure, actual value
Control button in instrument cluster
Coolant temperature
Counter of component protection malfunctions
Data logger triggering
Date
Day counter
Distance
Distance, high resolution
Engine oil temperature
Engine speed
FAZIT identification test sum
FIX: Distance covered since last mileagedependent inspection
Fix: Max. distance until next mileage-related inspection
FIX: Maximum time until next time-dependent inspection
FIX: Reset value for next mileage-dependent inspection
FIX: Reset value for next mileage-dependent inspections
FIX: Time since last timedependent inspection
Fuel level gasoline
Fuel tank sens
GPS time
Key identification MOST address
MOST transfer malfunction
Outside air temperature
Outside temp., displayed value
Parking brake status
Phototransistor
Ring break diagnostic line status
Security Access: number of invalid keys
Service -interval- display, history 1
Service -interval- display, history 2
Service -interval- display. history 3
Service -interval- display, history 4
SIA: maximum value of distance to service
SIA: maximum value of time to service
SIE: distance driven from inspection
SIE: maximum value km-driving distance/ inspection
SIE: maximum value of time between inspections
SIE: minimum value km-driving distance/ inspection
SIE: oil quality
SIE: remaining distance
SIE: remaining running time
SIE: service exceedance in days
SIE: service exceedance in km
SIE: soot entry
SIE: thermal load
SIE: time from inspection
Starting impulse recognized
temporary VIN
Terminal 58 status
Time
Time since ignition off
Vehicle configuration
Vehicle configuration 2
Vehicle speed
Voltage terminal 30
Volume after refueling
Wheel circ.
WIV: minimum value of time between inspections
WIV: Theoretical service interval
Adapted_transponders_ch ecksum
dimming_channels_instru ment_cluster
ESI_active_warning
ESI_mileage_per_day
Immobilizer - Challenge
Instrument_recorder
onboard_computer
onboard_computer_cng
outside_temperature_algor ithm_group
n read_out_measurement_value_block
Service_Key_current_data
Service_Key_Data_Current _Page
Service_Key_data_previous _page
Service_Key_Master_Coun ter
Service_Key_Mileage_Date
Service_Key_Pointer
State Blocking Time
State of Immobilizer
State of Immobilizer Slaves
Transponder ID current
Кеу
Transponder ID Key 1
Transponder ID Key 2
Transponder ID Key 3
Transponder ID Key 4
Transponder ID Key 5
Transponder ID Key 6
Transponder ID Key 7
Transponder ID Key 8
Long coding 0
===========
Long coding 1
==========
Byte 00
Bit 0
Bit 1 - 1
Bit 2 - 1
Bit 3
Bit 4
Bit 5 Right-and-Drive (RHD)
Bit 6 Speed Warning at 120 kph (75 mph)
Byte 01
Bit 0
Bit 1 - Gauge Test/Needle Sweep (Staging)
Bit 2
Bit 3 - Lap Timer
Bit 4 - Key Ignition Warning
Bit 5 - Cruise Control System
Bit 6
Bit 7 Efficiency Program for Board Computer.
Byte 02
Bit 0 - 7 no description
Byte 03
Bit 0 - 7 no description
Byte 04
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6 - Lane Assist pt1 (Enabled, Not Enabled)
Bit 7
Byte 05
Bit 0
Bit 1
Bit 2 - Activated
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 06
Bit 0 - 7 no description
Byte 07
Bit 0 - 7 no description
Byte 08
Bit 0 - 7 no description
Byte 09
Bit 0
Bit 1
Bit 2
Bit 3 - Compass Display Position - Bottom, Top
Bit 4
Bit 5
Bit 6
Bit 7
Byte 10
Bit 0
Bit 1 - Display oil temperature
Bit 2 - Display Acceleration - No, Yes
Bit 3 - Display ambient temperature - activate
Bit 4 - Refueling gasoline amount in DIS - activate
Bit 5 - Display telephone Menu - Activated
Bit 6 - Display Nav/compas
Bit 7
Byte 11
Bit 0
Bit 1 - Lane Assist pt2 - Enabled
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 12
Bit 0 - 7 no description
Byte 13
Bit 0 - 7 no description
Byte 14
Bit 0 - 7 no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
Output test
Analog displays
Component protection
Gong
indicator lights
Lighting
More functions lights
Segment test
Test picture in center display
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assemblyline mode (EOL)
Development mode
Sub Systems
J367-BDMHella
E221_MFL-PR6
Live data
adapted battery capacity
Adapting for energy management
Allocation data bus identifier
Allocation LIN system number
Analysis of start voltage behavior
Auxiliary heater activation restriction request
Battery cell analysis
Battery charge condition
Battery current
Battery degradation for start/stop - operation
Battery internal resistance
Battery internal resistance not normed
Battery model
Battery temperature
Battery terminal recognition
Battery total charging throughput
Battery voltage
Battery voltage at rest
Break recommend., last message
Bus communication
Bus identification
Closed-circuit current of last LIN sleep phase
Comp. protect participant occasionally wrongly authent.
Component protection participant currently wrongly authent.
Control module reference number
Cruise Control System (CCS), switch position
Current charge contingent for feedback
Data bus defect error
Data bus single wire err.
Data bus TimeOut error
Driving profile history data
Driving profile history data
Driving profile history data
Driving profile history data
Driving profile selection button
Driving profile selection statistics
Driving profile selection, system status
Energy management heat output control status
Energy reclamation request
Engine running status
Engine start using startstop function
Engine stop using startstop function
FAZIT identification test sum
FPA enabled profiles
Generator Analysis
Generator current
Generator DF signal
Generator exciter current
Generator limitation
Generator regulator variant
Generator specified voltage value
Generator status
Generator variant
History data 1
History data 10
History data 11
History data 12
History data 13
History data 16
History data 2
History data 21
History data 22
History data 3
History data 30
History data 37
History data 4
History data 5
History data 6
History data 7
History data 8
History data 9
Increase idle speed request
Individualization characteristic
Installation list, additional installations
Installation list, current installations
Methods for support of high voltage side
MFL button for freely assignable function
Multifunction steering wheel control module
Number of prevented stop processes
Number of requested start processes
Open-circuit voltage gateway
Pause recommendation
Play protection status
Prevented stop processes (ring memory)
Previous journey duration
Previous journey energy summary
Public key for SWaP function
Range extension counter, stage 2
Readiness for bus sleep mode
Reduce internal fan request
Release code for a SWaP function
Requested start processes (ring memory)
Security Access: number of invalid keys
Selected driving profile
Standard - ambient data 1
Start process requested
Start-stop conditions
Start-stop enabling
Start/stop starting voltage prediction
Static current measurement, result
Static current measurement, status
Static current shutdown level
Status condition determin. ready for idle
Status hybrid DC/DC converter
Status LIN user
Status of all SWaP functions
Status of event memory
Status power receptacle
Status, driv prof.select.for corn.light & headlamp range ctrl
Status, driv. profile selec. for ctr. differential
Status, driv. profile selec. for rear spoiler
Status, driv.profile select. for front axle differential lock
Status, drive profile for area view
Status, driving profile selec. for hill descent control
Status, driving profile select. for brake ctrl. sys.
Status, driving profile selection for A/C
Status, driving profile selection for adaptive cruise control
Status, driving profile selection for ambient lighting
Status, driving profile selection for belt tensioner
Status, driving profile selection for damping adjustment
Status, driving profile selection for engine
Status, driving profile selection for external noise actuator
Status, driving profile selection for free-running hub
Status, driving profile selection for power steering
Status, driving profile selection for start-stop function
Status, driving profile selection for structureborne noise
Status, driving profile selection for transmission
Stop process prevented
Stored key for component protection participants
System malfunctions for active participants start/ stop
Temperature of battery sensor
Terminal 15 status
Terminal 15 status via CAN
Usable battery charge
Voltage terminal 30
Calibration_Value_Cyclic_V oltage_Measurement
Driving_Profile_Selection_C oordinator_BAP_State
Driving_Profile_Selection_C oordinator_Retry_State
Driving_Profile_Selection_D river_Operations
Driving_Profile_Selection_F unctions_Master_Preliminary
Driving_Profile_Selection_S ystem_Substate
eASS_operation_status
EM_battery_analog_monit oring
EM_blAlternator On
EM_blAlternator Valid
EM_Current_Control_Reku
EM_IAlternatorReserve
EM_LoadResponse Time
EM_PAltMechanical
EM_prcSoh
EM_Recuperation_Precond ition
EM_Recuperation_Restriction
EM_RekuMode_Engine
Gateway Applikation Software Identifikation
MKE_HFC_filtrated
Long coding 0
long coding 1
Byte 00
Bit 0 - Generator via LIN databause 1 (PR 7L3/7L6)
Bit 1 Battery data module via LIN databus 1 (PR7L6)
Bit 2 - 7 no description
Byte 01
Bit 0 Multi fnction steering wheel via LIN databus 2 (PR 1XW/1XX/2PF/2PK/2ZQ/2ZS)
Bit 1 - 7 no description
Byte 02
Bit 0 - 7 no description
Byte 03
Bit 0 - 1 no description
Bit 2 - 3 Start/Stop system
Bit 4 - 7 no description
Byte 04
Bit 0 - Start/Stop system
Bit 1 - Recuperation
Bit 2 - Shut off recommendation ignition/terminal
Bit 3 - Enabling for deep recuperation (PR 7L6)
Bit 4 - no description
Bit 5 - Voltage depression in idele (gasoline engines only)
Bit 6 - 7 no description
Byte 05
Bit 0 - 4 Battery location
Bit 4 - 7 no description
Byte 06
Bit 0 - 7 Engine type
Byte 07
Bit 0 - 7 no description
Byte 08
Bit 0 - dRIVE PROGRAM FUNCTIONS
Bit 1 - Personalization for driver program functions
Bit 2 - Play protection for drive program functions
Bit 3 - Display messages for drive program functions via bap
Bit 4 - Display for drive program functions in instrument cluster
Bit 5 - No description
Bit 6 - Button for drive program functions with interpretation via high side
Bit 7 - Missing data
Byte 09
Bit 0 - 7 no description
Byte 10
Bit 0 - 7 no description
Byte 11
Bit 0 - no description
Bit 1 - Drive program function 'advanced front lighting system (AFS)
Bit 2 - 7 no description
Byte 12
Bit 0 - 1 - no description
Bit 2 - Drive program function 'free wheel/clutch (PR EF1+gOr/g1a/g1c)
Bit 3 - 7 - no description
Byte 13
Bit 0 - Board computer with efficiency display function live tip
Bit 1 - Board computer with efficiency display function comfort consumption
Bit 2 - Board computer with efficiency dispaly function auxiliary heater calculation
Bit 3 - Board computer with efficiency display function LED Filter
Bit 4 - 6 - no description
Bit 7 missing data update please
Byte 14
Bit 0 - 7 - no description
Byte 15
Bit 0 - EASS function
Bit 1 - 7 - no description
Byte 16
Bit 0 - 7 - no description
Byte 17
Bit 0 - Fatigue detection (MKE)
Bit 1 - 7 - no description
Byte 18
Bit 0 - 7 Fatigue detection (MKE) - Variant
Byte 19
Bit 0 - 7 - no description
Byte 20
Bit 0 - 7 - no description
Byte 21
Bit 0 - 7 - no description
Byte 22
Bit 0 - 7 - no description
Byte 23
Bit 0 - 7 - no description
Byte 24
Bit 0 - 7 - no description
Byte 25
Bit 0 - 7 - no description
Byte 26
Bit 0 - 7 - no description
Byte 27
Bit 0 - 7 - no description
Byte 28
Bit 0 - 7 - no description
Byte 29
Bit 0 - 7 - no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
48V-System, Sperrung nach Crash aufheben
Deletion of a SWaP function
Erase counter for start and stop processes
Release of SWaP function
Reset of reversible crash shut off
Reset of the adaptations of the WakeUp-Monitor
Reset of the historical data for the WakeUp-Monitor
Resetting history memory
(IDE13058) Electrical_system_r eset_configuration
Output test
Analog clock test
Battery cell analysis
Component protection
Driving profile selection
Generator specified voltage value variable
Pause recommendation
Start valid authentication round
Static current analysis
Target generator voltage value 15V
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assemblyline mode (EOL)
Development mode
Live data
Analysis 3
Analysis 4
Can output signal(s) status
Checksum calculations
Clutch temperature
Control module temperature
Cooling fin temperature
Data logger triggering
Difference front axle speed
Driving profile selection
Duration of overtemperature
Front left wheel speed
Front right wheel speed
Haldex clutch pump current
Haldex clutch pump PWM signal
Haldex clutch pump voltage
Haldex clutch status
Left rear wheel speed
Reset counter
Right rear wheel speed
Roller test bench mode, functinal
Security Access: number of invalid keys
Standard - ambient data 1
Status of actuator test
Status of basic setting
Voltage terminal 30
Pump_Calibration_Values
Upper Limit of Temperature Duration.
Long Coding 0
Long Coding 1
Byte 00
Bit 0 - 7 - No Description
Byte 01
Bit 0 - 7 - No Description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
Open 4 motion coupling for ignition cycle
Pump motor
Resetting of all adaptation values
Output test
Haldex clutch actuation
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
Diagnosis ode for safety-related systems
End of assemblyline mode (EOL)
IO Test Session
Development mode
Subsystems
Long coding
Live data
Ambient illumination for speaker
Ambient light
Central window regulator switch
Child safety
Child safety lock button 2
Child Safety Lock Switch
Comfort function for front window regulator, driver side
Comfort function for rear window regulator, driver side
Dimming for interior ambient lighting
Dimming of inside door handle lighting
Distance impulses
Driver power window button
Driver side rear power window button
DWA Interior monitoring/vehicle inclination sensor button
Enable driver front window regulatory relay
Enable driver-side rear window regulator
Excess.temp.disconnect, rear window regulator, driver side
Excessive temper.disconnect, front window regulator, driv.side
Front driver side door status
Front window regulator relay, driver side
Front window regulator, reversing position, driver side.
Front window regulator status, driver side
Fule filler door release button
Function lighting child safety
Ident. of rear window regulator programming, driver side
Memory seat adjustment control head
Mirror adjustment (X/Y-direction)
Mirror adjustment switch
Mirror fold-in activation
Mirror fold-in, current consumption
Mirror folding position
Mirror heater
Mirror memory
Number of driving cycles without opening door
Outside air temperature
Play protection, mirror fold-in
Rear lid remote release button
Rear window regulator child lock, driver side
Rear window regulator relay, driver side
Rear window regulator reversing position, driver side
Rear window regulator status, driver side
Recognition of motor variant for window regul,
Security Access: number of invalid keys
Standard - ambient data 1
Status of actuator test
Status of basic setting
Supply voltage for door control module, front, driver side
Supply voltage for door control module, rear, left
Switch for inside door handle
Switch for outside door handle
synchronous mirror adjustment
Terminal 58xd dimmer
Terminal 58xs dimmer
Turn signal in exterior rear view mirror
Vehicle speed
Window lift, switch-over from front to rear
Window regulator child lock, driver side
Window regulator control unit, driver side
control_event_memory_driver_side_rear
Driver_Rear_VW_FAZIT_Identification_String
Status_of_Input_Output_Control_Subsystem_1
Status_of_Input_Output_Control_Subsystem_2
Window_Regulator_Driver_Side_Rear_Sleep_Indication
Window_Regulator_Driver_Side_Rear_VW_Workshop_System_Name
Long Coding 0
Long Coding 1
Byte 00
Bit 0 - 7 no description
Byte 01
Bit 0 - Door entry lights
Bit 1 - Ambient lighting
Bit 2 - Door exit light
Bit 3 - Interior door handle ilumination
Bit 4 - Mirror turn signals
Bit 5 - Door entry lights not active while mirrors folded
Bit 6 - Mirror/door handle/speaker lights
Bit 7
Byte 02
Bit 0 - Safe motor
Bit 1 - Lock/unlock button
Bit 2 - Fuel lid unlock button
Bit 3 - Rear lid unlock button
Bit 4 - Keyless entry system
Bit 5 - 6 no description
Bit 7 Child lock/protection
Byte 03
Bit 0 - 4 no description
Bit 5 Reduced blocking time
Bit 6 - 7 no description
Byte 04
Bit 0 - Heated mirrors
Bit 1 - no description
Bit 2 - Reverse gear mirror dipping
Bit 3 - Position memory for reverse gear mirror dipping
Bit 4 - Foldable mirrors
Bit 5 - PTC Mirror heating
Bit 6 - Comfort mirror folding
Bit 7 Synchronous mirror adjustment
Byte 05
Bit 0 - Right Hand Drive
Bit 1 - 7 no description
Byte 06
Bit 0 -3 - Window motor type (Variant 5 = Bit 2 ticked)
Bit 4 - 7 - no description
Byte 07
Bit 0 - LIN Databus
Bit 1 - 6 - no description
Bit 7 Presafe system
Byte 08
Bit 0 - 7 no description
Byte 09
missed this one
Byte 10
Bit 0 - Seat ejection system
Bit 1 - 3 - no description
Bit 4 Window motor post run (Except NA Region)
Bit 5 - 7 - no description
Byte 11
Bit 0 - Adaptive cruise control
Bit 1 - Interior monitor and inclination sensor button conbined
Bit 2 - 7 - no description
Adaptations
use following link to spreadsheet with all adaptations channel details link
Basic Settings
Adapt front window regulator, driver side
Adapt rear window regulator, driver side
Front window regulator, driver side
Front window regulator, driver side, reset adaptation
Rear window regulator, driver side
Rear window regulator, driver side, reset adaptation
Recognition of motor variant for window regul
Reset standardization, front window regulator, driver side
Reset standardization, rear window regulator, driver side
Test sequence for central locking
Output Test
Central locking
Front window regulator, driver side
lighting
Mirror adjustment (X/Y - direction)
Mirror fold-in
Mirror heater
Rear window regulator, driver side
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Live data
Active reset
Battery terminal recognition
Control module temperature
Counter
Counter steer support
Data logger triggering
Development messages
Driving profile selection
Long Coding 0
Long Coding 1
Byte 00
Bit 0 - Driver steering recommendations
Bit 1 - Park steer assist
Bit 2 - 3 - Torque steer compensation
Bit 4 - Lane assist
Bit 5 - External steering angle sensor
Bit 6 - no description
Bit 7 - Driving profile selection
Byte 01
Bit 0 - 7 no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
Reset to factory setting
Resetting of all adaptation values
Resetting of all adaptations
Software end-stop reset
Steering angle sensor
Steering angle sensor, initialization
Steering angle sensor, move to mechanical center
Steering angle sensor, zero calibration w/steer. wheel scales
Output test
Reserved
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Subsystems
Long coding
Live data
Ambient illumination for speaker
Ambient light
Comfort function for front window regulator, frt.pass.side
Comfort function for rear window regulator, frt.pass.side
Dimming for interior ambient lighting
Dimming of inside door handle lighting
Distance impulses
Enable front passenger window regulator relay
Enable frt.pass.-side rear window regulator
Excess.temp.disconnect, front window regulator, frt.pass. side
Excess temp.disconnect for rear window regulator, frt.pass.side
Front passenger power window button
Front passenger side door status
Front passenger side rear power window button
Front window regulator relay, frt.pass. side
Front window regulator reersing position, frt.pass. side
Front window regulator status, frt.pass. side
Ident. of rear window regulator programming, frt.pass. side
Memory seat adjustment control head
Mirror adjustment (X/Y-direction)
Mirror fold-in activation
Mirror fold-in, current consumption
Mirror folding position
Mirror heater
Mirror memory
Outside air temperature
Play protection, mirror fold-in
Rear window regulator child lock, frt.pass. side
Rear window regulator reversing position, frt.pass. side
Rear window regulator status, frt.pass side
Recognition of motor variant for window regul,
Security Access: number of invalid keys
Standard - ambient data 1
Status of actuator test
Status of basic setting
Supply voltage for door control module, front, frt.pass side
Supply voltage for door control module, rear, frt.pass. side
Switch for inside door handle
Switch for outside door handle
Terminal 58xd dimmer
Terminal 58xs dimmer
Turn signal in exterior rear view mirror
Vehicle speed
Window regulator child lock, frt.pass. side
control_event_memory_passenger_side_rear
Passenger_Rear_VW_FAZIT_Identification_String
Status_of_Input_Output_Control_Subsystem_1
Status_of_Input_Output_Control_Subsystem_2
Window_Regulator_Passenger_Side_Rear_Sleep_Indication
Window_Regulator_Passenger_Side_Rear_VW_Workshop_System_Name
Long Coding 0
Long Coding 1
Byte 00
Bit 0 - 7 no description
Byte 01
Bit 0 - Door entry lights
Bit 1 - Ambient lighting
Bit 2 - Door exit light
Bit 3 - Interior door handle ilumination
Bit 4 - Mirror turn signals
Bit 5 - Door entry lights not active while mirrors folded
Bit 6 - Mirror/door handle/speaker lights
Bit 7
Byte 02
Bit 0 - Safe motor
Bit 1 - Lock/unlock button
Bit 2
Bit 3
Bit 4 - Keyless entry system
Bit 5 - 6 no description
Bit 7
Byte 03
Bit 0 - 4 no description
Bit 5 Reduced blocking time
Bit 6 - 7 no description
Byte 04
Bit 0 - Heated mirrors
Bit 1 - Mirror memory function (with memory seats)
Bit 2 - Reverse gear mirror dipping
Bit 3 - Position memory for reverse gear mirror dipping
Bit 4 - Foldable mirrors
Bit 5 - PTC Mirror heating
Bit 6 - Comfort mirror folding
Bit 7 - Synchronous mirror adjustment
Byte 05
Bit 0 - Right Hand Drive
Bit 1 - 7 no description
Byte 06
Bit 0 -3 - Window motor type (Variant 5 = Bit 2 ticked)
Bit 4 - 7 - no description
Byte 07
Bit 0 - LIN Databus
Bit 1 - 6 - no description
Bit 7 - Presafe system
Byte 08
Bit 0 - 7 no description
Byte 09
Bit 0 - 7 no description
Byte 10
Bit 0 - Seat ejection system
Bit 1 - 3 - no description
Bit 4 - Window motor post run (Except NA Region)
Bit 5 - 7 - no description
Byte 11
Bit 0 - Adaptive cruise control
Bit 1 - Interior monitor and inclination sensor button conbined
Bit 2 - 7 - no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic Settings
Adapt front window regulator, frt.pass. side
Adapt rear window regulator, frt.pass.side
Front window regulator, frt.pass. side, reset adaptation
Rear window regulator, front passenger side
Rear window regulator,frt.pass. side, reset adaptation
Recognition of motor variant for window regul.
Reset standardization, front window regulator, frt.pass side
Reset standardization, rear window regulator, frt.pass. side
Test sequence for central locking
Window regulator front passenger side.
Output test
Central locking
Lighting
Mirror adjustment (X/Y - direction)
Mirror fold-in
Mirror heater
Rear window regulator, front passenger side
Window regulator front passenger side
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Live data
Ambient brightness
Analysis 1
Data logger triggering
Driving profile selection
Engine start using start stop function
Engine stop using start stop function
Front jounce travel
Left front level control system sensor
Left front level ctrl sys sensor, adaptation value (zero pos)
Left headlight beam adjusting motor, specified value
Left headlight beam adjusting motor, status
Left rear level control system sensor
Left rear level ctrl sys sensor, adaptation value (zero pos)
Left-/right hand driving switch-over
Low beam
Motor status
Rear jounce travel
Right headlight beam adjusting motor, specified value
Right headlight beam adjusting motor, status
Security Access: number of invalid keys
Status of basic headlamp setting
Status of basic setting
Status reverse gear
Steering wheel angle
Supply voltage for external components
Vehicle speed
Voltage terminal 15
Headlight levelling control state
Left headlight levelling control value
Right headlight levelling control value
Long Coding 0
Long Coding 1
Byte 00
Bit 0 - 4 - Model
Bit 5 - 7 - no description
Byte 01
Bit 0 - no description
Bit 1 - Rain/Light sensor
Bit 2 - Left hand drive
Bit 3 - no descriptin
Bit 4 - 5 - Rear axle type
Bit 6 - no description
Bit 7 - Start/stop function
Byte 02
Bit 0 - 7 - no description
Byte 03
Bit 0 - 7 - no description
Byte 04
Bit 0 - Headlight regulation
Bit 1 - 7 no description
Byte 05
Bit 0 - 7 - no description
Byte 06
Bit 0 - 7 - no description
Byte 07
Bit 0 - 7 - no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic Settings
Acknowledge basic setting
Basic headlamp setting
Resetting of all adaptations
Output test
Move headlamp vertically to the left
Move headlamp vertically to the right
Yellow warning lamp
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Subsystems
ABTiminStdNvHG
ECE 2014
Live Data
Activation for housing fan
Angle of turn sensor for navigation
BAP
Bluetooth
Bluetooth device address
Bluetooth: connected device 1
Bluetooth: connected device 2
Bluetooth: connected device 3
Bluetooth: connected device 4
Bluetooth: connected device 5
Bluetooth: Paired device 1
Bluetooth: Paired device 2
Bluetooth: Paired device 3
Bluetooth: Paired device 4
Bluetooth: Paired device 5
Bluetooth: visibility
Card reader
Card reader 2
Control head button operation
Data logger triggering
Engine speed
External multimedia device interface
GPS Almanac
GPS position
GPS signal strength
GPS time
Individualization characteristic
Last wake-up cause
Malfunction status
Mechanics of display unit 1 for multimedia systems
Media type in optical drive
Microphone current consumption
Microphone override meter
MOST address
Multimedia display unit 1
Mute
Navigation calibration
Navigation corrected position
Network diagnosis
No. of unscheduled ECU resets
Over-temperature protection for amplifier
Pressing a button
Proximity detection for touchscreen 1
Public key for SWaP function
Radio tuner 1
Radio tuner 2
Release code for a SWaP function
Ring break diagnostic line status
Ring break diagnostic results
Roller test bench mode functional
Satellite radio tuner status
Security Access number of invalid keys
Speaker status
Speed-dependent volume adjustment
Standard - ambient data 1
Status GPS reception
Status of active media source at output 1
Status of all SWaP functions
Status of antenna 1 for radio
Status of antenna 2 for radio
Status of digital radio antenna 1
Status of GPS antenna
Status of telephone
Status of tune for digital radio (DAB)
Status terminal S
System run time
Temperature of MMX PC boards
Temperature of MOST transceiver
Temperature of processor circuit board
Temperature, audio amplifier
Temperature, optical drive
Terminal 15 status
Terminal 50 status
Terminal 58xd dimmer
Terminal 58xs dimmer
Terminal 75 status
Total system run time
Traffic information
Update software via medium
USB connection
Vehicle speed
Vehicle state
Video input status
Voice operation last detected command
Voltage terminal 30
Wake-up cause
Byte-Coding-cONDITION
DAB_FM_linking
GPS_Count_Satellite_Phase_Lock_Counter
GPS_Satellite_Code_Loce_Counter
Last_System_Operating_Time
Last_System_Starting_Time
Navigation_Calculated_Direction
SDARS_module_information
SDARS_Service
SDARS_subscription_status
Status_Position_Touchscreen_1
Theft_protection_error_counter.
Long Coding 0
Long Coding 1 - please note it appears that all descriptions are in list above
Byte 00
Bit 0 - 7 no description
Byte 01
Bit 0 - 7 no description
Byte 02
Bit 0 - 7 no description
Byte 03
Bit 0 - 7 no description
Byte 04
Bit 0 - 7 no description
Byte 05
Bit 0 - 7 no description
Byte 06
Bit 0 - 7 no description
Byte 07
Bit 0 - 7 no description
Byte 08
Bit 0 - 7 no description
Byte 09
Bit 0 - 7 no description
Byte 10
Bit 0 - 7 no description
Byte 11
Bit 0 - 7 no description
Byte 12
Bit 0 - 7 no description
Byte 13
Bit 0 - 7 no description
Byte 14
Bit 0 - 7 no description
Byte 15
Bit 0 - 7 no description
Byte 16
Bit 0 - 7 no description
Byte 17
Bit 0 - 7 no description
Byte 18
Bit 0 - 7 no description
Byte 19
Bit 0 - 7 no description
Byte 20
Bit 0 - 7 no description
Byte 21
Bit 0 - 7 no description
Byte 22
Bit 0 - 7 no description
Byte 23
Bit 0 - 7 no description
Byte 24
Bit 0 - 7 no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic Settings
Bluetooth:delete coupled device
Deletion of a SWaP function
Infotainment recorder
Release of SWaP function
Reset navigation calibration
Reset to factory setting
Start ring break diagnostic
Frequency_Seek_AM
Frequency_Seek_FM
Service_Seek_DAB
Output test
Acoustic check of loudspeakers
Activation for housing fan
Component protection
Diagnostic connection for external audio sources
Eject optical medium\(CD/DVD Eject)
Electrical test of loudspeakers
Establish connection to last Bluetooth device
Mechanics of display unit 1 for multimedia system
Remote control for AM frequency selection
Remote control for digital radio service selection (DSB)
Remote control for fader
Remote control for FM frequency selection
Remote control for satellite radio station selection
Remote control for selecting the audio source
Remote control for voice operation
Remote control for volume
Remote control frequency selection digital radio (band 111)
Remote control frequency selection digital radio (band L)
Search for Bluetooth devices
Status remote control
Test image display unit 1 for multimedia system
Operation_Unit_Simulation_Control_Knob
Operating_Unit_Simulation_Keys
Operating_Unit_Simulation_Volume
Remote_Seek_Activation
Remote_Set_AF
Remote_Set_AUX_Sensitivity
Remote_Set_Concealment_Level
Remote_Set_DAB_Announcement
Remote_Set_DAB_Default
Remote_Set_DAB_Linking
Remote_Set_DAB_Mute
Remote_Set_DRC
Remote_Set_dyn_ZF
Remote_Set_GALA
Remote_Set_Hidden_Tune
Remote_Set_Highcut
Remote_Set_IBOC_Service
Remote_Set_LBand
Remote_Set_Loudness
Remote_Set_Mute
Remote_Set_Phase_Diversity
Remote_Set_Sound_Settings
Remote_Set_TP
Remote_Shift_Frequency_AM_Activation
Remote_Shift_Frequency_DAB_Activation
Remote_Shift_Frequency_FM_Activation
Rremote_Volume_Potentiometer_Control
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Live Data
Audio reduction factory setting
Audio reduction request
Cause of park assist switching off
Convertible factory setting offset for volume level 1
Data logger triggering
Decay time for left front center park assist sensor
Decay time for left front park assist sensor
Decay time for right front center park assist sensors
Decay tie for right front park assist sensors
Diagnostic mode
Direct distance of left front center park assist sensor
Direct distance of left front park assist sensor
Direct distance of left rear center park assist sensor
Direct distance of left rear park assist sensor
Direct distance of right front center park assist sensor
Direct distance of right front park assist sensor
Direct distance of right rear center park assist sensor
Direct distance of right rear park assist sensor
Distance of left rear center park assist sensors
Distance of left rear park assist sensor
Distance of right front park assist sensors
Distance of right rear center park assist sensors
Distance of right rear park assist sensor
Distance sensor for left front center park assist
Distance sensor for right front center park assist
Driving direction
Factory setting for increment for cenvertible volume levels
Factory setting for park assist volume/frequencies
Increment for convertible volume levels
Indir. distance left front center to right fr. center sensor
Indir. distance left rear center to right rr.center sensor
Indir. distance fright front center to left fr.center sensor
Indir. distance right rear center to left rr. center sensor
Indirect distance of left front to left front center sensors
Indirect distance of left rear center to left rear sensors
Indirect distance of left rear to left rear center sensors
Indirect distance of right front center to right front sensors
Indirect distance of right front to right front center sensors
Indirect distance of right rear to right rear center sensors
No. of unscheduled ECU resets
Number of prevented stop processes
Oscillating time of left rear center park assist sensors
Oscillating time of left rear park assist sensors
Oscillation time of right rear center park assist sensors
Oscillating time of right rear park assist sensors
Outside air temperature
Outside air temperature internally calculated
Park assist activation tone
Park assist button
Parking aid input signal
Personalization 1 for park assist
Personalization 2 for park assist
Personalization 3 for park assist
Personalization 4 for park assist
Prevented stop processes (ring memory)
Resulting distance of front sensors
Resulting distance of rear sensors
Security Access: number of invalid keys
Sound output for park assist in selector lever position P
Speaker frequency for front park assist
Speaker frequency for rear park assist
Speaker volume for front park assist
Speaker volume for rear park assist
Standard - ambient data 1
Start-stop conditions
Status of actuator test
Status of basic setting
Stop process prevented
Supply voltage for park assist sensor
Switch-off speed for parking assist
System condition of park assist
Temporary function limita-tion due to environmental influences
Vehicle speed
Voltage terminal 15
Dimming_Signal_Terminal_58xd_pdc_pla
Long Coding 0
Long Coding 1
Byte 00
Bit 0 - 7 no description
Byte 01
Bit 0 - 7 no description
Byte 02
Bit 0 - 7 no description
Byte 03
Bit 0 - 7 no description
Byte 04
Bit 0 - 7 no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic Settings
Erase counter for start and stop processes
Resetting of all adaptations
Output Test
Activation of park assist
Front park assist speaker
Park assist speaker
Parking Aid Indicator Light
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assemblyline mode (EOL)
Development mode
Long coding 1
Byte 00
Bit 0 - 7 - Lane Assist
Byte 01
Bit 0 - 7 - Traffic sign recognition
Byte 02
Bit 0 - Light/High beam assist - Mode 1 - Light Assist
Bit 1 - 7 - Light/High beam assist
Byte 03
Bit 0 - High beam assist additional high beams
Bit 1 - 7 no description
Byte 04
Bit 0 - Traffic sign recognition region - Western Europe
Bit 1 - 7 Traffic sign recognition region
Byte 05
Bit 0 - 1 Vehicle manufacturer
Bit 2 - Vehicle manufacturer - Seat
Bit 3 - 7 Vehicle manufacturere
Byte 06
Bit 0 - 7 Camera type
Byte 07
Bit 0 - 7 - Navigation system type
Byte 08
Bit 0 - 7 - Windshield type
Byte 09
Bit 0 - 7 - Headlight type
Byte 10
Bit 0 - 7 - Lane Assist - Bit 0 = Active
Byte 11
Bit 0 - 7 - Lane change assist - Bit 0 = Installed
Byte 12
Bit 0 - 7 - Adaptive cruise control - Bit 0 = installed
Byte 13
Bit 0 - 7 - Lane assist country (no ticks = Rest of the World)
Byte 14
Bit 0 - 7 - Steering type - Bit 0 = Right hand drive
Byte 15
Bit 0 - 7 - Windscreen heater for lane assist - Bit 0 = Installed
Byte 16
Bit 0 - 7 - Trailer recognition control module - No ticks = Not Installed
Live Data
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Live Data
Blindness detection
Calibration marks
Control module temperature
Current static calibration status
Current static calibration, details
Data logger triggering
Driving axis angle
Dynamic calibration, camera height offset
Dynamic calibration, details
Dynamic calibration, pitch angle offset
Dynamic calibration, roll angle offset
Dynamic calibration, status
Dynamic calibration, yaw angle offset
Existence probability of object
Front axle transverse position
High beam assistant, status
High beam recommendation
High beam, reason for shut-off
Highest recorded control module temperature
Last static calibrations, details
lowest recorded control module temperature
Object distance in x-direction
Object distance in y-direction
Outside air temperature
Rear axle transverse position
Search calibration target
Security Access: number of invalid keys
Standard - ambient data 1
Status of actuator test
Status of basic setting
Steering wheel angle
Street illumination
System run time
Vehicle detection during darkness
Vehicle speed
Visibility
Voltage terminal 15
Windshield heater for directional stabilization assistance
Yaw rate
() basic_value_spe
() Camera_information
() EH_Additional_In_Town
() EH_Additional_lanes
() EH_Additional_Ramp
() EH_Additional_Street_Class
() EH_Additional_Street_Class_Extended
() EH_Additional_Street_Situation
() EH_Additional_Structural_Separation
() EH_Additional_Toll
() EH_GPS_Altitude
() EH_GPS_Latitude
() EH_GPS_Latitude_Sign
() EH_GPS_Longitude
() EH_GPS_Longitude_Sign
() EH_No_Overtaking
() EH_Position_Position_Definite
() EH_Speed_Limit_Common
() EH_Speed_Limit_Restricted_Array
() EH_Speed_Limit_Time_Restricted
() EH_Speed_Limit_Type
() EH_Sys_Country_Code
() EH_Time_Restricted_Days
() EH_Time_Restricted_Hour_End_1
() EH_Time_Restricted_Hour_End_2
() EH_Time_Restricted_Hours_Start_1
() EH_Time_Restricted_Hours_Start_2
() EH_Variable_Message_Signs
() EHR_Position_Segment_ID
() FDD_reason_for_passive
() Fog_detected
() hca-Parameter_APP31_APP40
() HCA_Crashspeicher_Datensatz_0
() HCA_Crashspeicher_Datensatz_1
Just turn it off, that is what most people do.
Adaptations
use following link to spreadsheet with all adaptations chanel details LINK
Output Test
Structure-borne sound actuator
Live Data
Driving profile selection
Security Access: number of invalid keys
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assemblyline mode (EOL)
Development mode
All Adaptations have now been added,
All Known Security Codes (to the OBD11 App) have been added to each control unit
All Long Coding items have been added All basic settings have been added
All Live data items have been added
All output test's have been added
All Change service details have been added
Where specified all Sub Systems have been listed.
Work to complete:
Cross reference fully Long Coding 0 & 1 and update descriptions in 1 on app where missing
Complete the translations to english and add additional information as I find it.
There are no values show in the Adaption Maps currently, just the structure and my personal description where relevant once I have this bit completed I will update with options list against each adaption but that wont get done quickly.
Long Coding names are those that the user community have provided and no responsibility can be taken for accuracy or my Typo's.
Under long coding for the older modules there is only a list of Bytes and Bits, for the more modern versions you have a screen (0) which highlights some of the coding and options as
well as the second screen (1) that shows Bytes and Bits. As part of this thread I am also trying to map the new look to old look mappings.
If you amend one of them then the other is updated so they are showing same information but in a different style.
Further you will see below that on some of the Bytes i have multiple versions with the same description, this is because there are multiple answers so for example
The description of Manufacturer is shown 3 times but this supports VW, SKODA, SEAT, LAMBO Etc according to which bits that are ticked.
Explanation of the various items you will find when using OBD11 (For MQB Platform does not include older UDS Control units)
Thanks to DV52 once again for this following explanation (which made perfect sense to me):
All modern cars can be considered to be nothing more than a number of control systems connected to an engine and a set of wheels (yes this is a gross simplification, I agree!). Most control systems in a car are what's called "closed-loop systems". And ALL these control systems operate the same- they all perform a very basic task: They have an internal process that produces an output signal based on feedback and an input signal(s) - often feedback comes from a sensor/transducer of some sort.
DV52 Picture (thanks)
In all modules that operate control systems (i.e control modules) and regardless of the vehicle, there are really 3 x aspects that are able to be modified:
1/ Firmware
2/ Adaptation channels
3/ long coding
Firmware is like the heart-beat of the module's life-force: this is the internal software that operates the procedures for controlling some aspect(s) of the car. Firmware determines how the module will operate and the module's firmware relies on "inputs" to tell it about the external world: how the car is physically configured and what"parameters" the module is to use in certain circumstances (like how to turn ON/OFF each of the car's 35 x exterior lights). Some diagnostic cables like VCP can change firmware, but not OBD11, or VCDS.
The "inputs" that the firmware relies upon are "2 (Adaption)" and "3 (Long coding)" above. Now, I'm not sure what particular distinction VW officially uses between "adaptation channels" and "long coding", but my guess from observations is as follows:
Long coding are the software switches that tell the firmware what physical sensors/physical switches are installed in the car. For example, when a light-sensor is installed, a long coding Byte/Bit has to be set to tell the control module firmware to start measuring the sensor output and to do stuff to control the car's lighting.
Adaptation channels are generally different sorts of "inputs" that tell the module how-to-behave. For example, Leuchte programming is done by changing adaptation channels - these channels tell the module what function to allocate to each lamp and what level of illumination to give to that lamp.
I have added to the list Basic Settings
thanks to DV52 for definition
Basic settings are just another form of "input" to the closed-loop system. Speaking generally again, the more sophisticated sensors on a car need a initial set of parameters to to establish a reference point. The module's firmware uses this data as a "starting-point" for the feedback process in later operation.
For example, changing some adaptation channel values in the BCM will lose the level-horizon settings for the range-control motors on the headlights. The Basic settings procedure (for the modules @ address hex55) re-establishes the sensor's setting for level-ground. When these modules are taken from stock at the VW factory - each car goes through this basic setting procedure to establish zero degree tilt - as a reference setting. Once the module knows where zero-tilt is, it can accurately measure +ve/-ve angles.
and Readiness
thanks to DV2 for definition
Readiness is a group of "parameters" (usually 8 x binary Bits) in the engine module which indicate the health of the car's emission systems. A state of 0 means "fail" and 1 means "passed". Whenever you bulk clear DTCs, ALL 8 x bits are set to the "fail" state - if your car doesn't have all 8 x emission test capabilities, those Bits will automatically be reset to 1.
for completeness and have done it in this textual manner rather than excel to make it easier for people who use the search facility to find the relevant information.
Live Data
As the name implies these are just labels that allow you to watch and record (via charts) the live data where it is supported on your car
Explanation of acronyms
As some of these acronyms are in German for non German users its not always easy to work them out so i have listed all the one's I am aware of along with any others just to keep them all in one place. Please add any you want help with or know answers for below.
| Acronym | German Word | English Convertion |
| ACC | Adaptive Cruise Control | |
| ADL | Assistance Driving Lights | |
| AFS | Advanced front lighting system | |
| ASR | Anti Slip Regulation | |
| BAP | Bedien und Anzeigeprotokoll | Operating and display protocol |
| BCM | Body Control Module (Control Unit 09) | |
| CAN | Controller Area Network | |
| DSG | Direct Shift Gearbox | |
| DTC | Diagnostic Trouble Code | |
| DWA | DiebstahlWarnAnlage | Car Alarm |
| EGR | Exhaust Gas Recirculation | |
| ESCL | Electric Steering Coloumn Lock | |
| DWA | Diebstahlwarnanlage | Anti Theft Alarm |
| EOL | End of Line | |
| ESC | Electronic stability control | |
| HTDD | High Traction Drop Down | |
| IMRC | Intake manifold Runner Control | |
| LDS | LichtDrehSchalter | Rotary Light Switch |
| LIN | Local Interconnect Network | |
| MKE | Müdigkeitserkennung | Fatigue detection |
| NSW | Nebelschlusslicht | With fog lights |
| Terminal 15 | Ignition On | |
| UGDO | Universal Garage Door Opener | |
| ZV | ZentralVerriegelung | Central Locking |
Control units in detail below:
| Control unit: 01 Engine |  |
Security Codes
27971
A/C compressor torque
Absolute intake pressure
Absolute load value
ACC variants
ACC variants (coding)
Accelerator pedal, sensor voltage 1
Accelerator pedal, sensor voltage 2
Accelerator position
Accelerator position 2
Activation of fuel pump electronics
Activation of oil pressure switch valve
Activation of oxygen control after main cat
Activation radiator shutter result
Active brake system status
Adapt of angle sensor 1 f throttle valve
Adapt of angle sensor 2 f throttle valve
Adaptation of angle sensor 1 throttle valve, emerg. air gap
Adaptation of angle sensor 2 throttle valve, emerg. air дар
Adaptation of kick-down shifting point
Adaptation of load shift flaps
Adaptation of loss torque
Adaptation of throttle valve
Adaptation status for transmission neutral position sensor
Adaptation val cyl 1 with fast diagnosis
Adaptation val cyl 1 with slow diagnosis
Adaptation val cyl 2 with fast diagnosis
Adaptation val cyl 2 with slow diagnosis
Adaptation val cyl 3 with fast diagnosis
Adaptation val cyl 3 with slow diagnosis
Adaptation val cyl 4 with fast diagnosis
Adaptation val cyl 4 with slow diagnosis
Adaptive long-term value of mix. condition after cat. conv
Air mass, specified value
Allocation of oxygen sensors
Ambient air pressure
Average of ignition timing angle delay adjustment
AVS error status of last switch-over AVS stroke direction
AVS error status of last switch-over standard stroke direction
AVS operating condition
AVS overflow meter for all switch-overs
AVS switch-over meter for reg activation of curr. drive cycle
AVS switch-over meter, total
AVS valve stroke position, current
Brake light switch status
Brake system vacuum pump
Brake test switch status
Calculated oil temperature
Camshaft adaptation exhaust bank 1, phase position
Camshaft adaptation intake bank 1, phase position
Camshaft adjustment intake bank 1, activation
Camshaft adjustment intake bank 1, actual value
Camshaft adjustment intake bank 1, specified value
Camshaft adjustment, exhaust, bank 1, activation
Camshaft adjustment, exhaust, bank 1, actual value
Camshaft adjustment, exhaust, bank 1, specified value
Camshaft speed (RPM)
Cause for cancellation
CCS Switch
Charge air pressure control valve activation pulse duty factor
Charge air pressure control valve adaptation performed
Charge air pressure control valve position, actual value
Charge air pressure control valve position, target value
Charge air pressure control valve uncond voltage sensor
Charge air pressure control valve voltage, position closed
Charge air pressure control valve voltage, position open
Charge air pressure sensor, unconditioned voltage
Charge air pressure specified value
Charge air pressure, actual value
Charge press. ctrl.
Charge press. ctrl., adapt. higher than max. threshold
Charge Pressure Actuator, acknowledgment
Charge pressure actuator, actual position
Charge pressure actuator, adaptation for lower stop
Charge pressure actuator, adaptation for upper stop
Charge pressure actuator, operating status
Charge pressure actuator, specified position
Charge pressure actuator, specified value
Charge pressure control, less than min. threshold adaptation
Chg. press. ctrl. valve, sensor voltage max. value
Close cam shaft angle at quantity control valve
Clutch position sensor
Contact for tank leak test
Control module distance driven
Control module temperature
Coolant circulation pump, activation
Coolant fan 1, activation
Coolant fan 2, activation
Coolant shut-off valve
Coolant temp at radiator output, unconditioned voltage
Coolant temperature
Coolant temperature at engine outlet, specified value
Coolant temperature at engine outlet, unconditioned voltage
Coolant temperature at engine start
Coolant temperature at radiator outlet, actual value
Coolant temperature at radiator output, specified value
Coolant temperature difference between engine and radiator
Counter for fuel entry in oil
Crankshaft speed (RPM)
Cruise control switch actuation
Cruise Control System (CCS), status
Cruise control system, permanent deactivation
Cruise Control System, specified speed
Cruise control system, temporary deactivation
Current of oxygen sensor bank 1 sensor 1 (broadband sensor)
Currently running routine
Dist. driven with exh. Malfunction Indicator Lamp activated
Distance driven since erasing DTC memory
Driver request torque
Driver request torque
Drivetrain coord, cause of shutdown in cruise cntr and ACC mode
Drivetrain coordinator, ACC fault status
Drivetrain coordinator, brake fault status
Drivetrain coordinator, brake function status
Dynamic average of ignition timing angle delay adjustment
Dynamic factor 02 sensors bank 1 or bank 3 before cat. conv.
Engine mount 1
Engine mount 2
Engine oil temperature
Engine reverse rotation recognition
Engine shut-down overrides
Engine speed
Engine starting requirements
Engine status
Engine temp. management actuator, duty cycle activation
Engine temp. management actuator, raw value
Engine temp. mangmt. actuator, actual value of angle
Engine temp. mangmt. actuator, specified value of angle
Engine temper.
managem.actuator adaptation, result adaptation
Engine temperature management actuator
Engine temperature management actuator, after-run stop
Engine temperature management actuator, stop open
Engine torque
Engine-drag torque
Equivalence ratio target value
Error counter bad fuel
Error status for start-stop related sensors
Exhaust flap bank 1
Exhaust flap bank 2, activation
Exhaust flap, activation
Exhaust gas temperature before catalytic converter
Exhaust gas temperature sensor 1
Exhaust temperature 1 bank 1
Fuel consumption
Fuel high pressure sensor, unconditioned voltage
Fuel high pressure, actual value
Fuel low pressure sensor, unconditioned voltage
Fuel low pressure, actual value
Fuel Metering Valve
Fuel Pressure
Fuel temperature
Gear position sensor, current value
Gear position sensor, gear position valid
Gear position sensor, last valid value
Gear position sensor, raw value
Generator, load signal
Heat quantity that was transported via the catalytic converter
Heated oxygen sensor bank 1, sensor 1, activation
Heated oxygen sensor bank 1, sensor 1, resistance
Heated oxygen sensor bank 1, sensor 2, activation
Heated oxygen sensor bank 1, sensor 2, resistance
Heater support pump, spec. value
Hide cylinder
High fuel pressure, control deviation
High fuel pressure, specified value
High pressure pump injection volume
High pressure pump injection volume control deviation
High pressure regulation, adaptation value
Idle speed specified value
Ignition angle of current cylinder, actual value
Ignition timing adjustment cylinder 1
Intake air temperature
Intake air temperature, unconditioned voltage
Intake manifold pressure raw value
Intake manifold pressure, corrected
Intake manifold pressure, target value
Intake manifold Runner Control (IMRC), acknowledgment
Intake manifold Runner Control (IMRC), activation
Intake manifold runner control (IMRC), offset closed
Intake manifold Runner Control (IMRC), unconditioned voltage
Knock sensor, cylinder 1, voltage
Knock sensor, cylinder 2, voltage
Knock sensor, cylinder 3, voltage
Knock sensor, cylinder 4, voltage
Limitation, torque
Limitation, torque of clutch protection
Load shift flaps, actual value
Load shift flaps, specified value
Long term adaptation of mixture formation bank 1
Long term adaptation of oxygen sensor control, bank 1
Long-term adaptation of intake manifold injection
Long-term adaptation of intake manifold injection in idle
Long-term fuel trim bank 1 at idle
Lost torque adaptation A/ C compressor and driving mode
Lost torque adaptation driving mode
Lost torque adaptation,
idle
Low fuel pressure adaptation value for EFP
Low fuel pressure, specified value
Manifold absolute pressure sensor, unconditioned voltage
Mass flow through throttle valve
Mean engine air mass
Mean injection quantity
Median injection timing
Median vehicle speed
Misfire sum counter
Misfires per 1000 revolutions of cyl. 1 intake manif. injection
Misfires per 1000 revolutions of cyl. 2 intake manif. injection
Misfires per 1000 revolutions of cyl. 3 intake manif. injection
Misfires per 1000 revolutions of cyl. 4 intake manif. injection
Misfires per 1000 revolutions of cylinder 1
Misfires per 1000 revolutions of cylinder 2
Misfires per 1000 revolutions of cylinder 3
Misfires per 1000 revolutions of cylinder 4
Mixture adaptation factor at idle speed
Mixture adaptation factor at partial load
Mixture deviation in adapted partial load range
Monitoring status in current driving cycle
Monitoring status of additional Onboard Diagnosis
Monitoring status Onboard Diagnosis camshaft and knock sensor
Monitoring status since erasing DTC memory
Neutral position sensor, adapted transmission angle
Neutral position sensor, current transmission angle
Neutral position sensor, lower adaptation value
Long Coding 1 - Please note where no description is shown at the time of putting this together there were not details, Please add any information you can to help us update.
Byte 00
Bit 0 Manufacturer
Bit 1 Manufacturer
Bit 2 Manufacturer
Bit 3 Body Type - Limousine/Sedan
Bit 4 Body Type
Bit 5 Body Type
Bit 6 Market Europe/Rest of World
Bit 7 Market
Byte 01
Bit 0 Transmission Type - Direct Shift gearbox (DSG)
Bit 1 Transmission Type
Bit 2 Transmission Type
Bit 3 Transmission gear ratio - 6 speed
Bit 4 Transmission gear ratio
Bit 5 Transmission gear ration
Bit 6
Bit 7
Byte 02
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 03
Bit 0
Bit 1 - Climate Control Bidirectional Climate Control
Bit 2 - Climate Control
Bit 3 - Auxiliary Heater - Not Installed
Bit 4 - Airbags - Installed
Bit 5 - Parking Aid - Installed
Bit 6
Bit 7
Byte 04
Bit 0 - Cooling fan - 2 continuously fans
Bit 1 - Cooling fan
Bit 2 - Cooling fan
Bit 3
Bit 4
Bit 5 - water pump - 1 electric water pump
Bit 6 - water pump
Bit 7
Byte 05
Bit 0 - Right hand drive - Not active
Bit 1 - All wheel drive - Not Installed / Installed
Bit 2 - Anti lock breaking system (ABS) - Installed / Not Installed
Bit 3
Bit 4 - Trailer - Installed / Not Installed
Bit 5 - Cruise control system - Adaptive Cruise Control with Front Assist
Bit 6 - Cruise control system
Bit 7
Byte 06
Bit 0 - Stop/Start system installed
Bit 1
Bit 2 - Speed Limiter - Installed / Not Installed
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 07
Bit 0 - Emissions DU6(PR 7MK)
Bit 1 - Emissions
Bit 2 - Emissions
Bit 3 - Flexible Service Interval (Long Life) - Active / Not Active
Bit 4
Bit 5
Bit 6
Bit 7
Byte 08
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4 - Keyless entry system - Installed / Not Installed
Bit 5 - Electronic parking brake - Installed / Not Installed
Bit 6
Bit 7
Byte 09
Bit 0
Bit 1
Bit 2 - Exhaust Valves - Disabled
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Adaptions
use following link to spreadsheet with all adaption channel details LINK
Basic Settings
Adaptation of Fuel Pump (FP)
Automatic test sequence
Automatic test sequence_1
Automatic test sequence_2
Camshaft adjustment test
Catalytic converter regeneration
Checking secondary air system
Clutch engagement point adaptation
Clutch valve calibration
Cooling oil valve calibration
Distance sensor calibration
Drain fuel tank
Engagement point adaptation
Engine shut-down
Engine speed increase (end of line)
Engine temperature management actuator
Erase statistic memory
First adaptation of charge pressure actuator
Initial fuel filling --- PLEASE NOTE YOU NEED TO CHANGE DIAGNOSTIC MODE TO EOL (End Of assemby Line) for this to work.
Main pressure valve calibration
Mixture adaptation and intake manifold injection test
Mixture adaptation partial load
Oxygen sensor after catalytic converter, readiness for oper.
Oxygen sensor aging test bank 1 before catalytic converter
Position test of end stops of charge pressure actuator
Pressure release in rail
Read out system status ctrl module for fuel tank leak diagnost.
Resetting of all adaptation values
Service position
Tank ventilation valve check
Test charge pressure regulation
Test of camshaft adjustment exhaust
Test of camshaft adjustment intake
Test of cat. converter for back pressure
Test of catalytic converter bank 1
Test of cylinder-individual mixture deviation
Test of knock sensors
Test of oil pressure valve change-over
Test of oxygen sensor
Test of oxygen sensor aging after cat bank 1
Test of oxygen sensor control.
Test of oxygen sensor heater in deceleration mode
Test of oxygen sensor in deceleration mode
Test of oxygen sensors bank 1, Delta-Lambda
Test of throttle valve adaptation
Test, charge pressure actuator
Timing chain elongation, correction after other work
Timing chain elongation, reset after chain replacement
Transmission neutral position sensor adaptation
Output test
Exhaust bypass valve
Exhaust camshaft adjustment, bank 1
Exhaust flap
Exhaust flap bank 2
Fan 1 control circuit
Fuel pump electronics
Heater support pump
Inject. valve, intake manifold injection 1
Inject. valve, intake manifold injection 2
Inject. valve, intake manifold injection 3
Inject. valve, intake manifold injection 4
Intake camshaft adjustment, bank 1
Intake Manifold Runner Control (IMRC)
Motronic engine control module power supply relay
Oil pressure regulation valve
Quantity control valve
Radiator bypass change-over valve
Supply relay for engine components
Transmission coolant valve
Turbocharger recirculation valve
Readness
Monitoring status since erasing DTC memory
Number of emission relevant DTC memory entries
Malfunction indicator lamp
Monitoring of ignition misfires
Monitoring of fuel system
Monitoring of entire system
Catalytic converter monitoring
Monitoring of catalytic converter at operating temperature
Monitoring of tank ventilation system
Monitoring of Secondary Air Injection (AIR) System
Monitoring of oxygen sensor
Monitoring of oxygen sensor heater
Monitoring of EGR and camshaft adjustment
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
| Control unit: 02 Transmission |  |
Security Codes
None
Accelerator position
Actual position of gear adjuster B
Actual position of gear positioner A
Actual position of gear positioner C
Actual position of gear positioner D
AD value 1 of actual position of gear positioner
AD value 1 of actual position of gear positioner
AD value 1 of actual position of gear positioner
AD value 1 of actual position of gear positioner
Analysis 1
Analysis 10
Analysis 11
Analysis 12
Analysis 2
Analysis 21
Analysis 22
Analysis 23
Analysis 24
Analysis 25
Analysis 26
Analysis 29
Analysis 3
Analysis 31
Analysis 33
Analysis 34
Analysis 35
Analysis 37
Analysis 39
Analysis 40
Analysis 41
Analysis 42
Analysis 43
Analysis 44
Analysis 5
Analysis 53
Analysis 54
Analysis 55
Analysis 56
Analysis 57
Analysis 58
Analysis 61
Analysis 63
Analysis 65
Analysis 66
Analysis 7
Analysis 71
Analysis 8
Analysis 9
Brake light switch
Brake test switch
CAN bus installation information
Clutch 1 Adaption kiss point part 1 success counter
Clutch 2 Adaption kiss point part 1 success counter
Clutch temperature air / splash oil
Control module temperature
Current of main pressure valve
Current of valve for clutch 1 actual value
Current of valve for clutch 1 specified value
Current of valve for clutch 2 actual value
Current of valve for clutch 2 specified value
Currently running routine
Display of driving mode in instrument panel
Display of gear in instrument panel
Driving direction
Driving profile selection
Driving strategy driving portions in D or S w/ CCS
Driving strategy driving portions in S w/o CCS
Driving strategy driving portions in Tiptronic
Driving strategy transmission mileage
Duty cycle of gear solenoid valve A
Duty cycle of gear solenoid valve D
Engine speed
Engine stop prohibitions
Engine torque, qualification
Kick-down status
Lower adapted coupling point K1 from kiss point adaptation
Lower adapted coupling point K2 from kiss point adaptation
Mechatronics identification DQ250
Number of ignition cycles
Number of prevented stop processes (statistics)
Number of standard trips
Overall software description
Parameter set description
Pressure of clutch 1, actual value
Pressure of clutch 2, actual value
Production data transmission
Pulse duty factor of gear solenoid valve B
Pulse duty factor of gear solenoid valve C
Roller test bench mode, functional
Security Access: number of invalid keys
Selector lever information
Selector lever position
Selector lever position made plausible
Specified torque clutch 1
Specified torque clutch 2
Status of basic setting
Status of selector lever lock
Status of starter lock
Stop process prevented
Tiptronic downshift
Tiptronic upshift
Transmission fluid temperature
Transmission input speed
Transmission input speed (RPM) shaft 1
Transmission input speed (RPM) shaft 2
Transmission output speed (RPM) shaft 1
Transmission output speed (RPM) shaft 2
Transmission specified idle RPM
Upper adapted coupling point K1 from microslip adaptation
Upper adapted coupling point K2 from microslip adaptation
Vehicle speed
Voltage terminal 15
Voltage terminal 30
Long Coding 1
Byte 00
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 01
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Adaptations
Roller test bench mode, functional
Basic Settings
Basic setting of transmission
Calibration of synchro-points
Erase counter for start and stop processes
Reset CAN installation info
Reset clutch characteristic curve
Reset driving percentages per selector level position
Reset gear selector data
Reset logging data for clutch 1
Reset logging data for clutch 2
Resetting of all adaption values
Start double clutch fast adaptation.
Output Test
Gear Shift Lock Solenoid Control Circuit.
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
| Control Unit: 03 Brakes |  |
Security Codes
20103,40168,40304,25004,11966,15081,24990,37202,31857,24435,10815,11122,14108,14451,25377,25757,32304,33776,33777,37201,37203,37483,33799,01138,01295,
01972,02168,75202,75201,74999,27971,02537,02727,02817,02852,02919,03431,03499,04205,04286,04490,04538,04814,05008,05869,06723,07483,09102,09318,09854
All Wheel Drive (AWD)
Analysis 101
Analysis 102
Analysis 103
Analysis 104
Analysis 105
AUTO HOLD
Bleed brake system (rework bleeding)
Brake disk drying
Brake system button
Brake system sensor
CAN input signal(s) status
CAN output signal(s) status
CAN signals
Communication status of data bus 1
Counter steer support
Data logger triggering
Dynamic starting assist
Electromechanical parking brake
Electromechanical parking brake, parking brake motors
Electronic Differential Lock
Hardware version for suppliers
Hill descent control
Hill-start assistant
Hydraulic brake booster
Indicator light in the button for electromech. parking brake
indicator lights
Internal measured values
Left front ABS wheel speed sensor
Left rear ABS wheel speed sensor
Mode
Number of prevented stop processes
Number of requested start processes
Parking brake
Prevented stop processes (ring memory)
Pump load counter
Requested start processes (ring memory)
Right front ABS wheel speed sensor
Right rear ABS wheel speed sensor
Roll-over protection
Security Access: number of invalid keys
Sensor for roof rack recognition
Start process requested
Start-stop
Start-stop conditions
Start-stop enabling
Start-stop function, coding information
Stop process prevented
Supply voltages
Text display in instrument panel insert
Tire pressure monitoring display
Traction control system sensor
Vacuum sensor
Vehicle and trailer stabilization
Long Coding 1
There are 30 Byte's (0 - 29) but currently non of them have any narrative.
Adaptations
use following link to spreadsheet with all adaption channel details LINK
Basic Settings
ASR and ESP function deactivation
Basic setting for brake pressure sensor
Basic setting for inlet/cut-out valves
Basic setting of ESP sensor unit
Bleed brakes
Clutch pedal threshold (search for kiss point)
Deactivate dynamometer mode
Electro-mechanical parking brake function test
End lining change mode
Engage Haldex clutch
Erase counter for start and stop processes
Fill/bleed brake system
Hydraulic connection replacement check
Open Haldex clutch
Reset tire pressure monitoring display warnings
Reset to factory setting
Reset to factory setting of tire pressure monitory display
Resetting of all adaptation values
Roller test bench mode
Shut off longitudinal acceleration monitoring
Start lining change mode
Test of emergency brake warning display
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
Diagnosis mode for safety-related systems
End of assembly line mode (EOL)
IO Test Session
Development mode
| Control unit: 08 Air Conditioning |  |
Security Codes
none
A/C clutch
Actual value for fresh air/ recirculation air flow flap
Air quality status
Auxiliary heater, controlled
Auxiliary heater, in stages
Blower current
Blower reduction
Blower status
Blower voltage, actual value
Blower voltage, specified value
CAN input signal(s) status
CAN output signal(s) status
Center push-and-rotary knob counter
Compressor current, actual value
Compressor current, specified value
Compressor load
Compressor shut-off condition, last
Compressor shut-off requirement
Compressor shutoff requirement, antepenultimate
Compressor shut-off requirement, penultimate
Compressor speed
Compressor status, global
Compressor status, internal
Compressor, energy monitor
Convertible top status
Coolant change-over valve
Coolant change-over valve
Coolant change-over valve
Coolant circulation pump
Coolant circulation pump
Coolant circulation pump
Coolant fan activation, actual value
Coolant fan activation, specified value
Coolant temperature
Counter of compressor switch-offs
Data logger triggering
Defroster flap, actual value
Defroster flap, specified value
Defroster flap, stop closed
Defroster flap, stop open
Driving profile selection
Driving time remaining for basic setting of compressor run in
Engine speed
Engine start using startstop function
Engine stop using startstop function
External humidity sensor
Footwell vent temperature
Fresh air stop for fresh air/ recirculation air flow flap
Front air distribution flap, actual value
Front air distribution flap, air outlet stop
Front air distribution flap, footwell air outlet stop
Front air distribution flap, specified value
Humidity sensor, internal
HV heater shut-off condition
HV heater status, global
HV heater status, internal
HV heater temperature
Interior temperature
Left front vent temperature
Left heated seat stage
Left push-and-rotary knob counter
Left rear seat heater
Left temperature flap - actual value
Left temperature flap - specified value
Left temperature flap, cold stop
Left temperature flap, warm stop
No. of unscheduled ECU resets
Number of prevented stop processes
Number of requested start processes
Outside air temperature
Outside air temperature internally calculated
Potentiometer for rear vent temperature
Pressing a button
Prevented stop processes (ring memory)
Rear temperature flap, actual value
Rear temperature flap, cold stop
Rear temperature flap, specified value
Rear temperature flap, warm stop
Rear vent temperature
Recirculated air stop for fresh air/recirc air flow flap
Refrigerant cut-off valve 1
Refrigerant cut-off valve 2
Refrigerant pressure
Relay for standstill A/C, status
Remaining time of parking heater/ventilation operation
Requested start processes (ring memory)
Right front vent temperature
Right heated seat stage
Right push-and-rotary knob counter
Right rear seat heater
Right temperature flap, actual value
Right temperature flap, cold stop
Right temperature flap, specified value
Right temperature flap, warm stop
Specified value for fresh air/recirc air flow flap
Standard - ambient data 1
Start process requested
Start-stop conditions
Start-stop enabling
Start-stop function, coding information
Status of actuator test
Status of basic setting
Status of recirculation air
Stop process prevented
Sun intensity left
Sun intensity right
Supply voltage for external components
System run time
Temp sensor 1
Temp sensor 2
Temp sensor 3
Temp sensor 4
Temp sensor 5
Temperature after evaporator
Terminal 58xd dimmer
Terminal 58xs dimmer
Time since ignition off
Vehicle speed
Voltage terminal 30
Long Coding 0
===========
| Field Name | Possible Values | LC1 Mapping |
| Vehicle variant | Short rear (multivan), Sedan, Wagon, Fastback, Coupe, Convertible, OFFROAD, City van, pickup, MPV | Byte 00 Bit 0 - 3 |
| Chassis version | A - Platform, B - Platform, Reserved | |
| Roof | Standard, Sunroof, Panoramic roof, Convertible, Reserved, Solar roof | Byte 03 Bit 4 - 7 |
| Steering side of vehicle | Left-hand drive, Right-hand drive, Reserved | |
| Type of Fuel | Petrol, Diesel, Reserved, not necessary | Byte 02 Bit 0 - 3 |
| Number of cylinders | Electric drive, Reserved, Reserved, 3 cylinder, 4 cylinder, 5 cylinder, 6 cylinder, Reserved, 8 cylinder | Byte 03 Bit 0 - 3 |
| Glass | Standard, Green glass, Blue glass, Anti-reflection, Reserved, A/C comfort window | Byte 05 Bit 0 -3 |
| Drive type | Drive by combustion engine, Powertrain hybrid, Driver by electric motor, Reserved | |
| Auxiliary heater | Not installed, Elect. 600W auxiliary heater (PTC 3-stage via motor CM (CAN), Elect. Auxiliary heater (PTC) controlled (LIN), Fuel heater (parking heater installed), Elect. Auxilliary heater (PTC) 3-stage via ULR (univ. LIN relay), Reserved, Elect. 1000W auxiliary heater (PTC) 3-stage via motoer CM (CAN) | Byte 05 Bit 4 - 7 |
| Parking heater | not installed, installed, Reserved, Parking ventilation | Byte 06 Bit 0 |
| Coolant | R134a, HF01234yf, Reserved, R744 | Byte 06 Bit 4 |
| Coolant shut-off valve | not installed, Reserved, installed | |
| Camera heating | not installed, Reserved, installed | |
| Activation of start-stop function | not active, Reserved, active, Start/stop, seat venting prevention, Outside air temperature | |
| Air quality sensor, external | not installed, installed, Reserved | |
| Brand | Seat, Skoda, VW, VW - utility vehicles, Reserved, FAW Volkswagen, SVW | |
| Store re circulation air setting for terminal 15 off | Do not store, Save, Service life-dependent store, Reserved | |
| Humidity sensor, Internal | not installed, installed, Reserved | Byte 09, bit 2 & 3 |
| A/C heater function via remote control | not installed, installed, Reserved | |
| Display and control unit,rear | not installed, installed, Reserved, airtemperature_airvoluem_airdistribution | |
| Indirect ventilation | not installed, installed, reserved, installed_old | |
| Windshield defogger | ||
| Credit recirculated air | Not activated, activated, Reserved | |
| Climate modes | No display, Display, Reserved | Byte 07, Bit 0 |
| steering wheel heater | not installed, installed | |
| Frequency shift of blower control unit | Not activated, activated, Reserved | |
| Blower display in auto operation | Not activated, activated, Reserved | |
| Blower adjustment | normal tuning, Tuning with little air, Reserved, Tuning with more air in cooling operation | |
| Temperature tuning | normal tuning, colder tuning cooling operation, reserved | |
| Amplified overshoots heater operation | Not activated, activated, Reserved | |
| Compressor switch-on reduction | Not activated, activated, Reserved | |
| maxAC function | Version 1, Version 2, Reserved | |
| Window condensation exterior reduction at high humidity | not active, Close via characteristic curve, Reserved, Matching glass temperature model | |
| Blower logic for manual adjustment | Monual offset, Fan setting, absolute, Reserved | |
| Steering wheel heater levels | One-stage, Multi-level | |
| Steering wheel heater auto mode | not installed, Steering wheel temp, Outside air temperature, Reserved | |
| Rear seat heater | not installed, installed, Reserved | |
| Compressor magnetic clutch | not installed, installed | |
| External humidity sensor | Byte 09, bit 4 & 5 | |
| Heat pump control module | ||
| Seat menu | No display, Display | |
| Personalization | Not activated, activated, Reserved | |
| Climate_zones_second_seat _row | According to function requirements, one_zone, Two_zones, not installed | |
| HV heater | not installed, Reserved, hig_voltage_ptc, high_voltage_resistance_eater | |
| filtering_interior_air | not installed, Reserved, installed | |
| seat_ventilation_rear | not installed, Reserved, installed | |
| Sunlight Sensor | via CAN, installed | |
| Fresh air blower, front | According to function requirements, Small, Reserved, Large |
Long Coding 1
==========
Byte 00
Bit 0 - Body Type
Bit 1 - Body Type
Bit 2 - Body Type
Bit 3 - Body Type
Bit 4
Bit 5
Bit 6
Bit 7
Byte 01
Bit 0 - Vehicle manufacturer
Bit 1 - Vehicle manufacturer
Bit 2 - Vehicle manufacturer
Bit 3 - Vehicle manufacturer
Bit 4 - Steering
Bit 5 - Steering
Bit 6 - Steering
Bit 7 - Steering
Byte 02
Bit 0 - Fuel Type
Bit 1 - Fuel Type
Bit 2 - Fuel Type
Bit 3 - Fuel Type
Bit 4 - Engine type
Bit 5 - Engine type
Bit 6 - Engine type
Bit 7 - Engine type
Byte 03
Bit 0 - Number of cylinders
Bit 1 - Number of cylinders
Bit 2 - Number of cylinders
Bit 3 - Number of cylinders
Bit 4 - Roof Type
Bit 5 - Roof Type
Bit 6 - Roof Type
Bit 7 - Roof Type
Byte 04
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4 - Re circulation air settings after ignition cycle
Bit 5 - Re circulation air settings after ignition cycle
Bit 6 - Air circulation type
Bit 7 - Air circulation type
Byte 05
Bit 0 - Glass type
Bit 1 - Glass type
Bit 2 - Glass type
Bit 3 - Glass type
Bit 4 - Auxiliary heater
Bit 5 - Auxiliary heater
Bit 6 - Auxiliary heater
Bit 7 - Auxiliary heater
Byte 06
Bit 0 - Parking heater
Bit 1
Bit 2
Bit 3
Bit 4 - Coolant type
Bit 5
Bit 6
Bit 7
Byte 07
Bit 0 - Climate modes - Active, Not Active
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 08
Bit 0 - Front sensor camera heating - Installed, Not Installed
Bit 1
Bit 2
Bit 3
Bit 4, 5, 6 & 7 Start/Stop function - Installed
Byte 09
Bit 0, 1 - Air quality sensor - External air quality sensor installed
Bit 2, 3 - Internal humidity sensor - Installed
Bit 4, 5 - External humidity sensor - Installed, Not Installed
Bit 6
Bit 7
Byte 10
Bit 0 - 7 No description
Byte 11
Bit 0,1 - Windshield heating - Installed,Not Installed
Bit 2,3 - Steering wheel heater - Installed, Not Installed
Bit 4 - Frequency sift for blower control module - Installed, Not Installed
Bit 5
Bit 6 - Blower status display in auto mode - Active, Not Active
Bit 7
Byte 12
Bit 0 - 3 Air distribution/Blower adjustment - Normal
Bit 4 - 7 Temperature adjustment - Normal, Cold (Hot Countries)
Byte 13
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4 - 5 - C02 compressor activation reduction - Activated
Bit 6
Bit 7
Byte 14
Bit 0
Bit 1
Bit 3 - 4 - Window condensation reduction - Not Active
Bit 5 - 7 - Blower control for manual adjustment - Fan Setting.
Byte 15
Bit 0 - 7 No descriptions
Adaptations
use following link to spreadsheet with all adaption channel details LINK
Basic Settings
Adapt flap end stops
Compressor run in, automatic start
Compressor run in, manual start
Erase counter for start and stop processes
Reset to factory setting
Resetting of all adaptation values
Resetting of all adaptations
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
| Control Unit: 09 Central Electrics |  |
Sub Systems
WWS370 131124
RLFS
Security Codes
31347,27971,20103,40304,48396
Long Coding
========
Byte 00
Bit 0 - 7 - No Descriptions
Byte 01
Bit 0 - 7 - No Descriptions
Byte 02
Bit 0 - 7 - No Descriptions
Sensor, DWA
Sirene, DWA
Live data
Access and start authorization
Activation current
Activation for signal horn
Alarm horn for anti-theft warning system
Ambience lighting
Ambient lighting
Anti-theft warning system, history data
Back-up light
Brake light
Brake light switch
Button in center console
Central locking button
Central locking history
data
Comfort function history data
Convertible top status
Counter of component protection malfunctions
Data logger triggering
Daytime running lights
Daytime running lights
Door status, driver side rear
Door status, frt. pass. side rear
Driver info
DWA History data for alarm triggering
DWA Interior monitoring
DWA Interior monitoring/ vehicle inclination sensor button
DWA Number of alarms triggered in anti-theft warn.system sensor
DWA Sirens / alarm horn for anti-theft warning system
DWA Vehicle inclination sensor
DWA Vehicle inclination sensor, angle
Emergency flasher button
Energy management
Fog light
Footwell light
Front driver side door status
Front passenger side door status
Front windshield wiper module
Garage door opener, country code
Garage door opener, last programming
Garage door opener, programming channel 1
Garage door opener, programming channel 10
Garage door opener, programming channel 11
Garage door opener, programming channel 12
Garage door opener, programming channel 13
Garage door opener, programming channel 14
Garage door opener, programming channel 15
Garage door opener, programming channel 2
Garage door opener, programming channel 3
Garage door opener, programming channel 4
Garage door opener, programming channel 5
Garage door opener, programming channel 6
Garage door opener, programming channel 7
Garage door opener, programming channel 8
Garage door opener, programming channel 9
Garage door opener, reset counter
Garage door opener, second-to-last progr.
Garage door opener, supply voltage
Garage door opener, thirdto-last progr.
Head area heater
High beam
Humidity sensor, internal
Identification of parameterization
Interior light
Interior lighting
LED bar LIN master
LED bar LIN slave
Left cabin heater
Left front heated seat, status
Left seat backrest fan 1
Left seat cushion fan 1
Light recognition sensor
Light sensor
Light switch position
Low beam
Luggage compartment light
Multicontour seat frt.pass. side
Multicontour seat, driver's side
Operating current, light driver
Outside air temperature
Parking light
Parking light
Personalized settings
Play protection for central locking
Rain recognition sensor
Rear entry light
Rear fog light
Rear spoiler
Rear spoiler history data
Rear window defogger
Rear Window Wiper
Reversing light switch
Right cabin heater
Right front heated seat, status
Right seat backrest fan 1
Right seat cushion fan 1
Search lights
Security Access: number of invalid keys
Spray nozzle heater
Static AFS light
Status of actuator test
Status of basic setting
Sunroof
Sunroof front closed position switch
Sunroof shade
Sunroof shade switches
Supply voltage, terminal 30
Switch for engine hood
Tailgate condition
Tank cap lock
Terminal signals and start release
Turn signal
Vehicle key with remote control
Vehicle positioning system
Vehicle speed
Window washer system
Windshield defogger
Cycle_Protection_Counter
Ecu_Intern_Measurement_ Values_2
Entwicklermesswerte CONTI
Kopfraumheizung_Entwick lung
Lichtsensorparameter
LIN-Aktivitaet
Misc_wiper_values_1
misc_wiper_values_2
Mitsuba Wischermesswerte 1
Mitsuba Wischermesswerte 3
Monitor 1
Monitor 10
Monitor 2
Monitor 3
Monitor 4
Monitor 5
Monitor 6
Monitor 7
Monitor 8
Monitor 9
Parametermonitor_1
Parametermonitor_2
Parametermonitor_3
Parametermonitor_4
Parametermonitor_5
Parametermonitor_6
Parametermonitor_7
Parametermonitor_FF
Power up historie
Regensensorparameter
Resetcounter_EMW
RLS_Incidence_Counter
RLS_Rain_Sensor_Off_Just age
shadow_error_table
steuergeraetinterne Messwert (Zulieferer)
Temperaturen
UGDO_Control_Button
UGDO_Control Switchboar
values_motorloads
Versorgungspannungshistorie
Long Coding 0
==========
| Field Name | Possible Values | Mapping to LC1 / INFO |
| Lenkungsanordnung | steering assembly | |
| Verkehrsseite | traffic page | |
| Brand | ||
| Kessy | not installed, installed | Keyless entry system |
| Anhaengeranschlussgeraet | not installed, installed | Trailer connection unit |
| UGDO | not installed, installed | Universal Garage Door Opener |
| Schiebedachmodul_MD_1 | not installed, installed | Sunroof Module 1 |
| Schiebedachmodul_MD_3 | not installed, installed | Sunroof Module 3 |
| Schiebedachmodul_MD_Rollo | not installed, installed | Sunroof module MD roller blind |
| Erweiterte_Fernlichtsteuerung | Extended high beam control | |
| Bremsen_Steuergeraet | not installed, installed | Brakes control unit |
| Getriebesteuergeraet | not installed, installed | Transmission control unit |
| tt_spoiler | not installed, installed | |
| Klimaelektronik | not installed, installed | Climate Control |
| Sitzheitzung_CAN | Seat Heating | |
| Sitzheizungsfreigabe | not installed, installed | |
| Heizbare_Frontscheibe | not installed, installed | Heated Front Screen |
| Heizbare Heckscheibe | not installed, installed | Heated Rear Screen |
| Hybridfahrzeug | Hybrid Vehicle | |
| Recuperation | not active, active | |
| Carsharingfunktion | not installed, installed | Car Sharing Function |
| Sonderfunktionen 1 | not installed, installed | Special Function 1 |
| Remotestart | not installed, installed | Remote Start |
| Aussentemperatursensor | not installed, installed | Outside temperature sensor |
| Brake pad wear | not installed, installed | |
| Bedien_und_Anzeigeprotokoll | not active, active | Operating and display protocol |
| Lock_Unlock_Taster_direkt | not installed, installed | |
| Tausch_Tank_Hecktreiberausgang | No, Yes | |
| Schnittstelle_Tracking System | not active, active | Interface_Tracking System |
| elektrischer_Fensterheber_hinten | No, Yes | electric window rear |
| LED_bar | not installed, installed | |
| Regen_Lichtsensor | Rain light sensor | |
| Abblendlicht_Leuchtentyp | Low beam Light type | |
| Bremslicht_ist_auch_Blinklicht | No, Yes | Brake light is also flashing light |
| Eingabemedium_Suchbeleuchtung | Input medium search lighting | |
| Lichtdrehschalter (LDS) | Rotary Light Switch | |
| LDS_mit_Nebellicht | No, Yes | Rotary Light Switch with Fog lights |
| LDS_mit_Nebel_Schlusslicht | No, Yes | Rotary Light Switch with Tail Fogs |
| LDS_mit_AFL | No, Yes | Rotary Light Switch with AFL |
| LDS_mit_Standlichtstellung | No, Yes | Rotary Light Switch with Parking Light |
| Feuchtesensor | not installed, installed | humidity sensor |
| Funkfrequenz | radio frequency | |
| Personalisierung_Profilfunkion | Personalization profile function | |
| Heckschloss_Steuerung | Rear lock control | |
| ZV_ohne_Safe_Funktion | not installed, installed | Central Locking without safe function |
| ZV_Heck_Schlosstyp | Central Locking rear lock type | |
| Heckschloss_mit_Vorraste | No, Yes | Rear lock with pre-catch |
| Tankschloss | ||
| Fond_Schloss | rear lock | |
| Schlosstyp_NAR | No, Yes | |
| Viertuerer | No, Yes | |
| Schiebetuer_links | No, Yes | |
| Schiebetuer_rechts | No, Yes | |
| Zweiteilige_Heckklappe | not installed, installed | |
| Status_Tankdeckelverriegelung | Tank cap lock status | |
| Umgreifende_Heckklappe | not installed, installed | |
| Kontaktschalter_fuer_Motorhaube | not installed, installed | |
| IRUE_NGS_Deaktivierungstaster_direkt_am BCM_verdrahtet | No, Yes | |
| Diebstahlwarnanlage | ||
| Heckscheibenbruchsensor | not installed, installed | |
| DWA_Einfachhorn_oder_Sounder | ||
| tilt_sensor | No, Yes | |
| Schliesszylinder in_Richtung Oeffnen_aktiv (Thatcham inaktiv) | No, Yes | |
| Sensor_fuer_Innenraumueberwachung | No, Yes | |
| Frontwischertyp | ||
| Heckwischer | ||
| Scheinwerferreinigungsanlage | not installed, installed | |
| Waschduesenheizung | not installed, installed | |
| Insufficient brake fluid | not installed, installed | |
| Insufficient coolant | not installed, installed | |
| Insufficient washer fluid | not installed, installed | |
| trunk_lid_conrol_unit | not installed, installed | |
| Elektrische_Laderaumabdeckung | not installed, installed | |
| elektrische_Zuziehilfe_Heckdeckel | not installed, installed | |
| Virtuelles_Pedal | not installed, installed | |
| Hybrid_StartStopp_Deaktivierungstaster | not installed, installed | |
| Eis_Offroadtaster | not installed, installed | |
| ECO-Taster | not installed, installed | |
| PDC_Deaktivierungstaster | not installed, installed | |
| Cabrio_Verdeck | not installed, installed | |
| Parking heater | not installed, installed | |
| Elektische_Lenkradverriegelung | not installed, installed | |
| Personalisierungsuebernahme | not installed, installed | |
| Heckdeckelentriegelung_HDF_Innentaster | not installed, installed | |
| Codierungsabsicherung | ||
| Kopfraumheizung | not installed, installed | |
| Lock_Unlock_Toggle_Taster | not installed, installed | |
| Allwetterlicht | not installed, installed | |
| Zusatzcodierung Fahrprofiltaster hat keine LED | ||
| Frontscheibenheizungsansteuerung direkt von externem Algorithmus | not installed, installed | |
| Verortung Schiebedachmodule | ||
| KI.30G nicht weckfähig wegen Verbrauchern mit Stützkondensator | not installed, installed | |
| Sitzlueftung | not installed, installed | |
| Sitzpneumatik | not installed, installed | |
| Druckklappe | not installed, installed | |
| OCU | not installed, installed | |
| Fahrgeschwindigkeit_aus_ESP_21 | ||
| Energiemanagement Abschaltung |
Long Coding 1
==========
Byte 00
Bit 0 - 1 Steering (which side)
Bit 2 - 3 Manufacturer (Seat, VW, Skoda, Audi)
Bit 4 - 7 No description
Byte 01
Bit 0 - Keyless entry system (KESSY)
Bit 1 - Trailer hitc control module
Bit 2 - 3 No description
Bit 4 - Roof control module
Bit 5 - 7 No description
Byte 02
Bit 0 - 2 Lighting
Bit 3 - High traction drop downs (HTDD)
Bit 4 - Automatic transmission installed
Bit 5 - 7 no description
Byte 03
Bit 0 - No description
Bit 1 - Climate control
Bit 2 - 4 Seat Heating
Bit 5 - 7 Window Heating
Byte 04
Bit 0 - No description
Bit 1 - Start/Stop function
Bit 2 - 5 no description
Bit 6 - Ambient temperature sensor installed
Bit 7 - Brake pad wear sensor
Byte 05
Bit 0 - Operating and display protocol (BAP)
Bit 1 - Lock/unlock button directly connected to body control module (BCM)
Bit 2 - Lock/unlock toggle button
Bit 3 - 5 No description
Bit 6 - Rear power windows
Bit 7 - Footwell lights
Byte 06
Bit 0 - 1 Light sensor
Bit 2 - 4 no description
Bit 5 - 6 Xenon shutter
Bit 7 - no description
Byte 07
Bit 0 - 1 no description
Bit 2 - Light switch via LIN databus
Bit 3 - Light switch with front fog lights
Bit 4 - Light switch with rear fog lights
Bit 5 - Light switch with assistance driving light (ADL)
Bit 6 - Light switch with position lights
Bit 7 - Humidity sensor
Byte 08
Bit 0 - 1 - Market / country
Bit 2 - Personalization profiles active
Bit 3 - 5 no description
Bit 6 - Central locking without safe function
Bit 7 - no description
Byte 09
Bit 0 - 1 no description
Bit 2 - Rear lid lock with prelatch
Bit 3 - 5 no description
Bit 6 - Door locks without safe function for North American region
Bit 7 - Rear passenger doors
Byte 10
Bit 0 - 5 no description
Bit 6 - Hood switch
Bit 7 - no description
Byte 11
Bit 0 - 1 no description
Bit 2 - Rear lid remote button directly connected to body control module (BCM)
Bit 3 - 6 no description
Bit 7 - Anti theft system deactivatoin button directly connected to body control module (BCM)
Byte 12
Bit 0 - Anti theft system-system installed/active
Bit 1 - Anti theft system rear window/glass monitoring
Bit 2 - 3 no descriptionBit 4 - Anti theft system alarm horn/sounder
Bit 5 - Anti theft system inclination sensor
Bit 6 - Start anti theft alarm delay with mechanical door opening
Bit 7 - Anti theft system interior monitoring
Byte 13
Bit 0 - 1 no description
Bit 2 - Rear wiper Installed
Bit 3 - Headlight washers Not Supported by this control unit
Bit 4 - Heated front washer jets
Bit 5 - 7 no description
Byte 14
Bit 0 - Coolant fluid level sensor installed
Bit 1 - Brake fluid level sensor installed
Bit 2 - Washer fluid level sensor installed
Bit 3 - 7 no description
Byte 15
Bit 0 - 2 no description
Bit 3 - Start stop system deactivation button installed
Bit 4 - no description
Bit 5 - Drive select button
Bit 6 - no description
Bit 7 - Drive select button without function light - This turns off the Cupra mode button going yellow when in cupra mode.
Byte 16
Bit 0 - 1 no description
Bit 2 - Auxiliary/Parking heater
Bit 3 - Electric steering column lock (ESCL) Installed
Bit 4 - External consumer via terminal 30g
Bit 5 - 7 no description
Byte 17
Bit 0 no description
Bit 1 - Ambient door panel lights installed
Bit 2 - Ambient cup holder lights installed
Bit 3 - Ambient footwell lights installed
Bit 4 - Ambient speaker lights installed
Bit 5 - 6 no description
Bit 7 - Drive Profiles
Byte 18 - Hex 00
Bit 0 - 7 no description
Byte 19 - Hex 00
Bit 0 - 7 no description
Byte 20 - Hex 00
Bit 0 - 7 no description
Byte 21 - Hex 00
Bit 0 - 7 no description
Byte 22 - Hex 00
Bit 0 - 7 no description
Byte 23 - Hex 00
Bit 0 - 7 no description
Byte 24 - Hex 00
Bit 0 - 7 no description
Byte 25 - Hex 00
Bit 0 - 7 no description
Byte 26 - Hex 00
Bit 0 - 7 no description
Byte 27 - Hex 00
Bit 0 - 7 no description
Byte 28 - Hex 00
Bit 0 - 7 no description
Byte 29 - Hex 00
Bit 0 - 7 no description
Adaptations:
use following link to spreadsheet with all adaption channel details LINK
Basic Settings:
Automatic test sequence
Energy management
Rear windo defogger
Resetting of all adaptation values
Sunroof
Sunroof shade
Windshield defogger
Output Test:
Alarm horn for anthi-theft warning system
Ambience lighting
Ambient lighting
Back-up light
Brake light
Central locking rear
Component protectin
Compressor for multicontour seat drvr.side
Compressor for multicontour seat frt.pass.side
Consumer switch-off
Daytime running lights
Daytime running lights
DWA Interior monitoring indicator lamp
Emergency flasher indicator lamp
Fog light
Footwel light
Front windshield wiper module
Headlamp washer system
High beam
Indicator light for central locking
Indicator light in switch
Interior light
Left cabin heater
Left front heated seat
Left seat cushion fan 1
Lock unit for central locking in rear lid
Low beam
Luggage compartment light
Multicontour seat driver's side. syst. function test
Multicontour seat frt. pass. side. syst.function test
Output DTM LED bar
Parking Light
Parking light
Rear entry light
Rear fog light
Rear spoiler
Rear spoiler display
Rear window defogger
Rear window defogger indicator lamp
Rear window washer system
Rear window wiper module
Right cabin heater
Right front heated seat
Rightseat backrest fan 2
Search lights
Seat heater enabling
Signal horn activation
Spray nozzle heater
Static AFS Light
Sunroof
Sunroof shade
Tank flap
Turn signal
Windshield defogger
Windshield defogger indicator lamp
Windshield washer system
Ansteuerung KL_30G
Remotestart KL_15 Anforderung von FFB einschalten (HIGH-Pegal)
Window_Wiper_Front_Test
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
| Control Unit: 13 Adaptive Cruise Control |  |
Security Codes
14117,20103,91153,24085
Acceleration
Cause for prevention of activation at standstill
Cause for prevention of activation during travel
Cause of quick shutdown
Cause of soft shutdown
Control module temperature
Counter for internal faults
Counter of component protection malfunctions
Driving profile selection
Horizontal angle deviation
Individualization characteristic
Misalignment angle
Misalignment angle, fast algorithm
Public key for SWaP function
Radar status
Release code for a SWap function
Roller test bench mode, functional
Security Access: number of invalid keys
Status of all SWaP functions
Transport mode
Vehicle speed
Vertical angle deviation
Vertical deadjustment
Voltage terminal 15
ATB_Ausloesedokumentati on_Ereignis_0
ATB_Ausloesedokumentati on_Ereignis_1
Number_of_ACC_brakings _into_standstill
Number_of_ANB-CM
Number_of_ANB_partial_br akings
number_of_ANB_target_br eakings
Number_of_autonomous_ driveaways
Number_of_AWV1_prefills
Number_of_AWV2_brake_j olts
Number_of_AWV2_prewarnings
Number_of_driveaways_af ter_short_stop
Number_of_driver_intende d_driveaways
Operating_time_ACC
Operating_time_ACC_activ
Operating_time_ACC_activ e_in_standstill
Operating_time_AWV1_prefil
Operating_time_AWV3_EC
Operating_time_ECD_activ
Status ACC System
ZBR_Ausloesedokumentati on_Ereignis_0
ZBR_Ausloesedokumentati on_Ereignis_1
Long Coding 0
===========
| Field Name | Possible Values | Information / mapping LC1 |
| Country coding | rdw, nar_china, jpn | rdw = Rest of the World (UK, Europe) Byte 0 Bit 0 - 1 |
| boost_function | active, not active | |
| Automatic_driveaway_by_pretrigger | active, not active | Byte 01, Bit 02 |
| Automatic_driveaway_after_short_stop | active, not active | Byte 01, Bit 03 |
| Driveaway_by_triggerleaver | active, not active | |
| Operation_mode | operation_mode_1, operation_mode_2 | |
| Transmission | Man.trans, Automatic, E load drive | |
| Towing recognition control module | No, Yes | |
| camera | No, Yes | |
| Driving profile selection | No, Yes | |
| Parking brake | No, Yes | Byte 02, Bit 0 |
| Display mode | VW, Audi | |
| autonomous_partial_braking_pre_stage | active, not active | |
| target_braking | active, not active | |
| distance_warning | active, not active | |
| break_jolt | active, not active | |
| AWV2_optics_acoustics | active, not active | |
| AWV1_HBA_threshold_switch | active, not active | |
| AWV1_prefil | active, not active | |
| AWV_overall_default_value | Default, Last setting | |
| advance_warning_default_value | Default, Last setting | |
| urban_autonomouse_emergency_braking | active, not active | |
| autonomous_partial_braking_main_stage | active, not active | |
| response_AWV_to_moving_obstacles | active, not active | |
| response_AMW_to_stopped_obstacles | active, not active | |
| response_AMV_to_standing_obstacles | active, not active | |
| PreCrash_function | active, not active | |
| response_CityANB_to_standing_obstacles | active, not active |
Long Coding 1
===========
Byte 00
Bit 0 to 1 - Market, Rest of world is unticked.
Bit 2 to 7 - No Description
Byte 01
Bit 0 to 1 - Adaptive cruise control - installed or not installed
Bit 2 - Automatic drive away triggered by driver - Active, not active
Bit 3 - Automatic drive away after short stop - Active, not active
Bit 4 - 7 - No Description
Byte 02
Bit 0 - Electric parking brake - Installed, Not installed
Bit 1 - Drive select - Installed, Not Installed
Bit 2 - Front assist camera - Installed, Not Installed
Bit 3 - Trailer recognition control module - Installed, Not Installed,
Bit 4 - Automatic transmission - Installed, not installed
Bit 5 - 7
Byte 03
Bit 0 - 1 Display variant - Volkswagen, Audi
Bit 2 - 7
Byte 04
Bit 0 - 7 Stopping distance reduction - Standard
Byte 05
Bit 0 - 3 - Stopping distance reduction and city automatic Emergency brake assist - Standard
Bit 4 - 7 - No description
Byte 06
Bit 0 - 3 - Stopping distance reduction and city automatic Emergency brake assist
Bit 4 7 - No Description.
Adaptations:
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
Deletion of a SWaP function
Reactivation following multiple activation's emergency braking
Release of SWaP function
Reset Misalignment angle.
Output Test
Alignment procedure
Component protection
Heted Lens.
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
Diagnosis mode for safety-related systems
End of assembly line mode (EOL)
IO Test Session
Development mode
| Control Unit: 14 Wheel Dampening Electronics |  |
Security Codes
none
Adapted VIN
Adapting with deflected wheels
Analysis 1
Analysis 10
Analysis 11
Analysis 12
Analysis 13
Analysis 14
Analysis 15
Analysis 16
Analysis 17
Analysis 18
Analysis 19
Analysis 2
Analysis 20
Analysis 21
Analysis 22
Analysis 23
Analysis 24
Analysis 25
Analysis 26
Analysis 27
Analysis 4
Analysis 6
Analysis 7
Analysis 8
Analysis 9
Driving profile selection
Front left chassis acceleration sensor
Front right chassis accelerator
Initialization status
Internal damper mode
Left front dampening adjustment valve
Left front level control system sensor, raw value
Left front level ctrl sys sensor, adaptation value (deflected)
Left front level ctrl sys sensor, limit 1 (deflected)
Left front level ctrl sys sensor, limit 2 (deflected)
Left rear dampening adjustment valve
Left rear level control system sensor, raw value
Left rear level ctrl sys sensor, adaptation value (deflected)
Left rear level ctrl sys sensor, limit 1 (deflected)
Left rear level ctrl sys sensor, limit 2 (deflected)
Rear body acceleration sensor
Right front dampening adjustment valve
Right front level control system sensor, raw value
Right front level ctrl sys sensor, adaptation value (deflected)
Right front level ctrl sys sensor, limit 1 (deflected)
Right front level ctrl sys sensor, limit 2 (deflected)
Right rear dampening adjustment valve
Right rear level control system sensor, limit 1 (deflected)
Right rear level control system sensor, limit 2 (deflected)
Right rear level control system sensor, raw value
Right rear level ctrl sys sensor, adaptation value (deflected)
Security Access: number of invalid keys
Status of actuator test
Status of basic setting
Vehicle speed
Voltage supply for left sensor for level control system
Voltage supply for right sensor for level control system
Voltage terminal 30
Long Coding
Please note this control unit has no Long Coding function.
Adaptations
use following link to spreadsheet with all adaptations channel details and description of the possible options for each adaptation - LINK
Basic settings
Adapting with deflected wheels
Reset to as-delivered condition of control module manufacturer
Restore vehicle-specific data
Output test
Left front shock absorber hard
Left front shock absorber soft
Left rear shock absorber hard
Left rear shock absorber soft
Right front shock absorber hard
Right front shock absorber soft
Right rear shock absorber hard
Right rear shock absorber soft
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
Diagnosis mode for safety-related systems
End of assembly line mode (EOL)
IO Test Session
Development mode
| Control Unit: 15 Airbag |  |
Security Codes
None
Subsystems
SideSensor_Df
SideSensor_Pf
SideSensor_Dr
SideSornsor_Pr
FrontSensor_D
Security Codes
None
Airbag deactivation status
ass. side airbag igniter 2 ohm value
ass. side airbag igniter ohm value
ass. side rear belt tensioner igniter ohm value
ass. side side airbag igniter ohm value
assenger side 3rd row seat belt switch
Battery open circuit igniter ohm value
Counter of component protection malfunctions
Data logger triggering
Driver airbag igniter
Driver belt tensioner ohm value
Driver head curtain airbag igniter
Driver knee airbag igniter
Driver seat belt switch
Driver seat belt tensioner igniter 2
Driver seat position sensor current value
Driver side 3rd row seat belt switch
Driver side airbag igniter ohm value
Driver side belt force limiter igniter
Driver side belt force limiter igniter ohm value
Driver side belt tensioner igniter 2 ohm value
Driver side belt tensioner igniter ohm value
Driver side head curtain airbag igniter ohm value
Driver side knee airbag igniter ohm value
Driver side rear safety belt tension igniter
Driver side rear thorax airbag igniter
Driver side seat belt tension igniter
Driver thorax airbag igniter
Driver's side airbag igniter ohm value
Driving profile selection
Front passenger airbag igniter 2
Front passenger head curtain airbag igniter
Front passenger knee airbag igniter
Front passenger rear thorax airbag igniter
Front passenger side airbag igniter
Front passenger side belt force limiter igniter
Front passenger side safety belt switch
Front passenger side seat belt tension igniter
Front passenger side seat belt tensioner igniter 2
Frt.pass. belt tensioner ohm value
Frt.pass. seat position sensor current value
Frt.pass. side belt tensioner igniter 2 ohm value
Frt.pass. side belt tensioner igniter ohm value
Frt.pass. side head curtain airbag igniter ohm value
Frt.pass. side knee airbag igniter ohm value
Ft. pass.side rear airbag igniter ohm value
Igniter for batt. interrupt, high volt. batt. ohm value
Igniter for battery interrupt
Igniter for battery interrupt, high voltage battery
Key switch contact 1 ohm value
Key switch contact 2 ohm value
Key switch terminal 1
Key switch terminal 2
Left belt tensioner current consumption
Left belt tensioner supply voltage
Left belt tensioner temperature
Left belt tensioner tensioning cycles charac. curve 1
Left belt tensioner tensioning cycles charac. curve 2
Left belt tensioner terminal 15
Number of activations of pedestrian protection
Number of frontal crashes
Number of rear crashes
Number of rollover bar deployments
Number of rollover crashes
Number of side crashes driver side
Number of side crashes frt.pass. side
Occupation status, frt.passenger seat
Passenger airbag igniter
Passenger side rear safety belt tension igniter
Pedestrian protection trigger, driver side
Pedestrian protection trigger, driver side ohmic value
Pedestrian protection trigger, frt.pass. side
Pedestrian protection trigger, frt.pass. side ohmic value
Right belt tensioner current consumption
Right belt tensioner supply voltage
Right belt tensioner temperature
Right belt tensioner tensioning cycles charac. curve 1
Right belt tensioner tensioning cycles charac. curve 2
Right belt tensioner terminal 15
river side rear airbag igniter ohm value
river side rear belt tensioner igniter ohm value
Rollover protection trigger, driver side
Rollover protection trigger, driver side ohm value
Rollover protection trigger, frt.pass. side
Rollover protection trigger, frt.pass. side ohm value
Safety belt switch 2nd row center
Safety belt switch 2nd row driver side
Safety belt switch 2nd row driver side ohm value
Safety belt switch 2nd row frt.pass. side ohm value
Safety belt switch 2nd row frt.passenger side
Safety belt switch center 2nd row ohm value
Seat belt switch 3rd row driver side ohm value
Seat belt switch 3rd row frt.pass. side ohm value
Seat occupied recognition
Seat occupied recognition malfunction status
Seat occupied recognition ohm value
Seat position sensor, driver side
Seat position sensor, front passenger side
Security Access: number of invalid keys
side belt force limiter igniter ohm value
Supply voltage
Supply voltage, terminal 15
Workshop code for last rollover bar deployment
Long coding 1
Byte 00
Bit 0 - 7 No Description
Default Hex 98
Byte 01
Bit 0 - 7 No Description
Default Hex CC
Byte 02
Bit 0 - 7 No Description
Default Hex C0
Byte 03
Bit 0 - 7 No Description
Default Hex 00
Byte 04
Bit 0 - 7 No Description
Default Hex 00
Byte 05
Bit 0 - 7 No Description
Default Hex 00
Byte 06
Bit 0 - 7 No Description
Default Hex 00
Byte 07
Bit 0 - 7 No Description
Default Hex 00
Byte 08
Bit 0 - 7 No Description
Default Hex 5C
Byte 09
Bit 0 - 7 No Description
Default Hex 54
Byte 10
Bit 0 - 7 No Description
Default Hex 00
Byte 11
Bit 0 - 7 No Description
Default Hex CC
Byte 12
Bit 0 - 7 No Description
Default Hex 00
Byte 13
Bit 0 - 7 No Description
Default Hex 88
Byte 14
Bit 0 - 7 No Description
Default Hex 00
Byte 15
Bit 0 - 7 No Description
Default Hex 00
Byte 16
Bit 0 - 7 No Description
Default Hex 00
Byte 17
Bit 0 - 7 No Description
Default Hex 65
Adaptations
use following link to spreadsheet with all adaptations channel details including the settings on my car and if you download the spreadsheet you can also see all the possible options in column F by using the list button LINK
Basic Settings
Left belt tensioner serial number
Reset rollover bar deployments
Resetting seat occupied recognition
Right belt tensioner serial number
Seat occupied recognition serial number
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
Diagnosis mode for safety-related systems
End of assembly line mode (EOL)
IO Test Session
Development mode
| Control Unit: 16 Steering Column Electronics |  |
Security Codes
none
Buttons for multi-function display
Cruise Control System (CCS), switch position
Data logger triggering
Driver assistance systems button
Front wiping, front washing
High beam
Rear wiping, rear washing
Security Access: number of invalid keys
Signal horn activation
SMLS p locked
steering wheel heater
Terminal signals and start release
Turn signals and parking lights
GRA_im_Blinkerhebel
GRA_im_dritten_Hebel
LRH
Long Coding 0
==========
| Field Name | Possible Values | LC1 Mapping / info |
| Buttons for multi-function display | ||
| Rear Window Wiper | Byte 0 Bit 2 | |
| Driver assistance systems button | Byte 0 Bit 3 | |
| CCS on turn signal switch | ||
| CCS Switch | ||
| Distance Regulation | ||
| Signal horn activation | ||
| Contact bounce suppression for signal horn | ||
| not used | ||
| Diagnosis | ||
| reading P locked | Byte 1 Bit 4 |
Long Coding 1
==========
Byte 00
Bit 0 - no description
Bit 1 - Button for mutli function display/board computer
Bit 2 - Rear Wiper
Bit 3 - Button for driver assist systems
Bit 4 - 7 - Cruise control - Controlled via adaptive cruise control
Byte 01
Bit 0 - No description
Bit 1 - No description
Bit 2 - Speed limiter
Bit 3 - Button/leer diagnosis
Bit 4 - Selector lever locked in P
Bit 5 - 7 No description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
Resetting of all adaptation values
Output test
steering wheel heater
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
| Control unit: 17 Dash Board |  |
Security Codes
20103,25327
Calculated volume
Cause for cancellation
Charge air pressure, actual value
Control button in instrument cluster
Coolant temperature
Counter of component protection malfunctions
Data logger triggering
Date
Day counter
Distance
Distance, high resolution
Engine oil temperature
Engine speed
FAZIT identification test sum
FIX: Distance covered since last mileagedependent inspection
Fix: Max. distance until next mileage-related inspection
FIX: Maximum time until next time-dependent inspection
FIX: Reset value for next mileage-dependent inspection
FIX: Reset value for next mileage-dependent inspections
FIX: Time since last timedependent inspection
Fuel level gasoline
Fuel tank sens
GPS time
Key identification MOST address
MOST transfer malfunction
Outside air temperature
Outside temp., displayed value
Parking brake status
Phototransistor
Ring break diagnostic line status
Security Access: number of invalid keys
Service -interval- display, history 1
Service -interval- display, history 2
Service -interval- display. history 3
Service -interval- display, history 4
SIA: maximum value of distance to service
SIA: maximum value of time to service
SIE: distance driven from inspection
SIE: maximum value km-driving distance/ inspection
SIE: maximum value of time between inspections
SIE: minimum value km-driving distance/ inspection
SIE: oil quality
SIE: remaining distance
SIE: remaining running time
SIE: service exceedance in days
SIE: service exceedance in km
SIE: soot entry
SIE: thermal load
SIE: time from inspection
Starting impulse recognized
temporary VIN
Terminal 58 status
Time
Time since ignition off
Vehicle configuration
Vehicle configuration 2
Vehicle speed
Voltage terminal 30
Volume after refueling
Wheel circ.
WIV: minimum value of time between inspections
WIV: Theoretical service interval
Adapted_transponders_ch ecksum
dimming_channels_instru ment_cluster
ESI_active_warning
ESI_mileage_per_day
Immobilizer - Challenge
Instrument_recorder
onboard_computer
onboard_computer_cng
outside_temperature_algor ithm_group
n read_out_measurement_value_block
Service_Key_current_data
Service_Key_Data_Current _Page
Service_Key_data_previous _page
Service_Key_Master_Coun ter
Service_Key_Mileage_Date
Service_Key_Pointer
State Blocking Time
State of Immobilizer
State of Immobilizer Slaves
Transponder ID current
Кеу
Transponder ID Key 1
Transponder ID Key 2
Transponder ID Key 3
Transponder ID Key 4
Transponder ID Key 5
Transponder ID Key 6
Transponder ID Key 7
Transponder ID Key 8
Long coding 0
===========
| Field Name | Possible Values | Information |
| Speed warning | Off, On | Please note on this car you have 3 separate speed warnings possible this one is fixed at 75 mph, Winter Tires and also under adaptions there is speed warning that you can set to your own defined speed limit. |
| Steering side of vehicle | Left-hand drive, Right-hand drive | |
| Daytime lights (pointer) | No, Yes | |
| Daytime lights (dial) | No, Yes | |
| Ignition key warning device | no warning, Warning | |
| Lap counter | No, Yes | |
| Configuration of driver information system | No display, Display depiction | |
| Staging | No, Yes | |
| Vehicle variant | Version 0, 1, 2, 3, 4, 5, 6, 7, 8 | |
| Tank characteristic curve | Version 1, 2, 3, 4, 5, 6, 7, 8 | |
| Wheel circ. | Version 1, 2, 3, 4, 5, 6, 7, 8 | |
| All Wheel Drive (AWD) | No, Yes | |
| Lane assistant | No, Yes | |
| Electrical steering | No, Yes | |
| Wheel dampening electronics | No, Yes | |
| Dynamic AFS Light | No, Yes | Adaptive Front Lighting System |
| Automatic distance regulation | No, Yes | |
| Electro-Mechanical Parking Brake Control Module | No, Yes | |
| Tire pressure monitoring display | No, Yes | |
| Time format | 24h, 12 AM_PM | |
| Volume | Liter, gallons (US), gallons (UK) | This is Fuel Volume |
| Pressure | Bar, PSI, kPa | What measure used to store tire pressure |
| Speed | Kilometers per hour, Miles per hour | |
| Distance | Kilometers, Miles | |
| Tepmerature | Degrees Celsius, Degrees Fahrenheit | |
| Consumption gasoline/diesel - LPG(Liquefied petroleum gas) | Miles per gallon (UK), Miles per gallon (US), Litres per 100 km, Kilometers per liter | |
| Date | dd_mm_yy, mm_dd_yy, yy_mm_dd | |
| Language version | German, English, US English, French, Italian, Spanish and many more. | |
| Cruise control display | No, Yes | |
| Start screen | Version 1, 2, 3, 4, 5, 6, 7, 8 | |
| Seat belt warning | Off, Version 2, Version 1 | |
| Break lining wear indicator with brake system indicator light | No, Yes | |
| Road sign detection | No, Yes | Please note you need to have the correct camera for this to work |
| Body computer with efficiency program | No, Yes | |
| Electrical steering column lock control module | No, Yes | |
| Transmission | Man.trans, Automated manual transmission | Automated manual transmission - DSG |
| Lane change assistance | No, Yes | |
| Lock electronics | No, Yes | |
| Parallel parking assistance | No, Yes | |
| Powertrain hybrid | No, Yes | |
| Audio | No, Yes | |
| Reducing stopping distance, install | No, Yes | |
| Acceleration display | No, Yes | As on the golf this is set to Yes but does not show anything. |
| Outside air temperature | No, Yes | |
| Volume to be replenished | No, Yes | |
| Telephone | No, Yes | |
| Navigation/compass | No, Yes | |
| Favorites button for multi-function display | No, Yes | |
| Operating range consumption, CNG(Compressed natural gas) | kg per 100 km, km per kg, m3 per 100 km, km per m3 | |
| Tire Pressure Monitoring | No, Yes | |
| Reducing stopping distance, BAP Distance | No, Yes | |
| Lane retention assistant, BAP distance | No, Yes | |
| Tire Pressure monitoring, BAP distance | No, Yes | |
| Hybrid drive, BAP distance | No, Yes | |
| Lane change assistant, BAP distance | No, Yes | |
| Compass display | Position top, Position bottom | |
| Oil temperature display | No, Yes | |
| Electronic brake booster | No, Yes | |
| Internal noise sound actuator | Yes, No | This is the horrible generator for sound when in Cupra Mode. |
| Dimming | Terminal 58xt dimmer, Terminal 58xd dimmer | |
| Average consumption, electric drive | kWh per 100 km, km per kWh, kWh per mile, Miles per kWh | |
| Radio list | Station name or frequency, Station name & frequency | |
| Exit warning | No, Yes | |
| Trailer positioning assistant | No, Yes | |
| Blind spot detection | No, Yes | For this to work you need to have blind spot (eg side) sensors fitted |
| Pedestrian protection, BAP distance | No, Yes |
Long coding 1
==========
Byte 00
Bit 0
Bit 1 - 1
Bit 2 - 1
Bit 3
Bit 4
Bit 5 Right-and-Drive (RHD)
Bit 6 Speed Warning at 120 kph (75 mph)
Byte 01
Bit 0
Bit 1 - Gauge Test/Needle Sweep (Staging)
Bit 2
Bit 3 - Lap Timer
Bit 4 - Key Ignition Warning
Bit 5 - Cruise Control System
Bit 6
Bit 7 Efficiency Program for Board Computer.
Byte 02
Bit 0 - 7 no description
Byte 03
Bit 0 - 7 no description
Byte 04
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6 - Lane Assist pt1 (Enabled, Not Enabled)
Bit 7
Byte 05
Bit 0
Bit 1
Bit 2 - Activated
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 06
Bit 0 - 7 no description
Byte 07
Bit 0 - 7 no description
Byte 08
Bit 0 - 7 no description
Byte 09
Bit 0
Bit 1
Bit 2
Bit 3 - Compass Display Position - Bottom, Top
Bit 4
Bit 5
Bit 6
Bit 7
Byte 10
Bit 0
Bit 1 - Display oil temperature
Bit 2 - Display Acceleration - No, Yes
Bit 3 - Display ambient temperature - activate
Bit 4 - Refueling gasoline amount in DIS - activate
Bit 5 - Display telephone Menu - Activated
Bit 6 - Display Nav/compas
Bit 7
Byte 11
Bit 0
Bit 1 - Lane Assist pt2 - Enabled
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Byte 12
Bit 0 - 7 no description
Byte 13
Bit 0 - 7 no description
Byte 14
Bit 0 - 7 no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
| Field Name | Details |
| Complete tank calibration | Routine Control Option 4 (Value 0 - 255), Complete tank calibration L (New Value), Routine Control Option_2 (0 - 255) |
| Immobilizer-Kessy key search | Routine Control Option (00) values 00 - FF |
| Resetting of the counter for MOST transfer malfunction | Routine Control Option - 400000 Values 00 - FF |
| Wet dry tank calibration | Volume after refueling (L) , Dead Volume (L) , Routine Control Option (4) Values 0 - 255 |
Output test
Analog displays
Component protection
Gong
indicator lights
Lighting
More functions lights
Segment test
Test picture in center display
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assemblyline mode (EOL)
Development mode
| Control unit: 19 Gateway |  |
Security Codes
20103
J367-BDMHella
E221_MFL-PR6
Live data
adapted battery capacity
Adapting for energy management
Allocation data bus identifier
Allocation LIN system number
Analysis of start voltage behavior
Auxiliary heater activation restriction request
Battery cell analysis
Battery charge condition
Battery current
Battery degradation for start/stop - operation
Battery internal resistance
Battery internal resistance not normed
Battery model
Battery temperature
Battery terminal recognition
Battery total charging throughput
Battery voltage
Battery voltage at rest
Break recommend., last message
Bus communication
Bus identification
Closed-circuit current of last LIN sleep phase
Comp. protect participant occasionally wrongly authent.
Component protection participant currently wrongly authent.
Control module reference number
Cruise Control System (CCS), switch position
Current charge contingent for feedback
Data bus defect error
Data bus single wire err.
Data bus TimeOut error
Driving profile history data
Driving profile history data
Driving profile history data
Driving profile history data
Driving profile selection button
Driving profile selection statistics
Driving profile selection, system status
Energy management heat output control status
Energy reclamation request
Engine running status
Engine start using startstop function
Engine stop using startstop function
FAZIT identification test sum
FPA enabled profiles
Generator Analysis
Generator current
Generator DF signal
Generator exciter current
Generator limitation
Generator regulator variant
Generator specified voltage value
Generator status
Generator variant
History data 1
History data 10
History data 11
History data 12
History data 13
History data 16
History data 2
History data 21
History data 22
History data 3
History data 30
History data 37
History data 4
History data 5
History data 6
History data 7
History data 8
History data 9
Increase idle speed request
Individualization characteristic
Installation list, additional installations
Installation list, current installations
Methods for support of high voltage side
MFL button for freely assignable function
Multifunction steering wheel control module
Number of prevented stop processes
Number of requested start processes
Open-circuit voltage gateway
Pause recommendation
Play protection status
Prevented stop processes (ring memory)
Previous journey duration
Previous journey energy summary
Public key for SWaP function
Range extension counter, stage 2
Readiness for bus sleep mode
Reduce internal fan request
Release code for a SWaP function
Requested start processes (ring memory)
Security Access: number of invalid keys
Selected driving profile
Standard - ambient data 1
Start process requested
Start-stop conditions
Start-stop enabling
Start/stop starting voltage prediction
Static current measurement, result
Static current measurement, status
Static current shutdown level
Status condition determin. ready for idle
Status hybrid DC/DC converter
Status LIN user
Status of all SWaP functions
Status of event memory
Status power receptacle
Status, driv prof.select.for corn.light & headlamp range ctrl
Status, driv. profile selec. for ctr. differential
Status, driv. profile selec. for rear spoiler
Status, driv.profile select. for front axle differential lock
Status, drive profile for area view
Status, driving profile selec. for hill descent control
Status, driving profile select. for brake ctrl. sys.
Status, driving profile selection for A/C
Status, driving profile selection for adaptive cruise control
Status, driving profile selection for ambient lighting
Status, driving profile selection for belt tensioner
Status, driving profile selection for damping adjustment
Status, driving profile selection for engine
Status, driving profile selection for external noise actuator
Status, driving profile selection for free-running hub
Status, driving profile selection for power steering
Status, driving profile selection for start-stop function
Status, driving profile selection for structureborne noise
Status, driving profile selection for transmission
Stop process prevented
Stored key for component protection participants
System malfunctions for active participants start/ stop
Temperature of battery sensor
Terminal 15 status
Terminal 15 status via CAN
Usable battery charge
Voltage terminal 30
Calibration_Value_Cyclic_V oltage_Measurement
Driving_Profile_Selection_C oordinator_BAP_State
Driving_Profile_Selection_C oordinator_Retry_State
Driving_Profile_Selection_D river_Operations
Driving_Profile_Selection_F unctions_Master_Preliminary
Driving_Profile_Selection_S ystem_Substate
eASS_operation_status
EM_battery_analog_monit oring
EM_blAlternator On
EM_blAlternator Valid
EM_Current_Control_Reku
EM_IAlternatorReserve
EM_LoadResponse Time
EM_PAltMechanical
EM_prcSoh
EM_Recuperation_Precond ition
EM_Recuperation_Restriction
EM_RekuMode_Engine
Gateway Applikation Software Identifikation
MKE_HFC_filtrated
Long coding 0
| Field Name | Possible Values | LC1 X Ref / info |
| Sollverbau_Generator | not installed, installed | |
| Sollverbau_BDM | not installed, installed | |
| Sollverbau_DCAC | not installed, installed | |
| Sollverbau_MFL | not installed, installed | |
| Sollverbau_Analoguhr | not installed, installed | |
| Sollverbau_Fahrprofildrehschalter | not installed, installed | |
| EM_Elektro_Fahrzeug | not active, active | |
| EM_Hybrid_Fahrzeug | not active, active | |
| EM_Ref_Spannungsmessung_Inaktiv | No, Yes | |
| EM_Zyklische_Spannungsmessung | not active, active | |
| EM_Batterie Architektur | ||
| EM_Start_Stopp | not active, active | |
| EM_Rekuperation | not active, active | |
| EM_KI_15_Abschaltempfehlung | not active, active | |
| EM_Tiefer Zug | not active, active | |
| EM_Luefter Mikroschalter | not active, active | |
| EM_Leerlauf_Spannungsabsenkung | not active, active | |
| EM_Ladestromempfehlung | not active, active | |
| EM_Erweitertes_NV_HV_EM | not active, active | |
| EM_Batterie Verbauort | ||
| EM_Autarkes_Nachladen | not active, active | |
| EM_Batterie_Ab_Anzeige | not active, active | |
| EM_Erweiterte_Batteriewarnung | not active, active | |
| EM_Empfehlung_Batterieservice | not active, active | |
| EM_Generator_Uebersetzung | ||
| EM_Autarker_LIN_DCAC | not active, active | |
| EM_FMA_Activ | not active, active | |
| EM_Batterieservice_temperaturunabhaengig | not active, active | |
| EM_Variant_MHEV | ||
| FPA_Funktion | not active, active | |
| FPA_Personalisierung | not active, active | |
| FPA_Spielschutz | not active, active | |
| FPA_BAP_Display | not active, active | |
| FPA_Kombi_Anzeige | not active, active | |
| FPA Taster_Auswertung | ||
| FPA_BAP_Start_aktiv | not active, active | |
| FPA_Funktion_EDS | not active, active | |
| FPA_Funktion_HHC | not active, active | |
| FPA_Funktion_PDC | not active, active | |
| FPA_Funktion_FMA | not active, active | |
| FPA_Funktion_29 | not active, active | |
| FPA_Funktion_30 | not active, active | |
| FPA Funktion_31 | not active, active | |
| FPA_Funktion_32 | not active, active | |
| FPA_Funktion_IVB | not active, active | |
| FPA_Funktion_KL | not active, active | |
| FPA_Funktion_HSP | not active, active | |
| FPA_Funktion_AV | not active, active | |
| FPA_Funktion_RWB | not active, active | |
| FPA_Funktion_HDC | not active, active | |
| FPA_Funktion_eBKV | not active, active | |
| FPA_Funktion_AGK | not active, active | |
| FPA_Funktion_VAQ | not active, active | |
| FPA_Funktion_AFS | not active, active | |
| FPA_Funktion_RGS | not active, active | |
| FPA Funktion_EPS | not active, active | |
| FPA_Funktion_ACC | not active, active | |
| FPA Funktion_SAK | not active, active | |
| FPA Funktion_MO_StSt | not active, active | |
| FPA_Funktion_AMB | not active, active | |
| FPA_Funktion_AGA | not active, active | |
| FPA_Funktion_ESP | not active, active | |
| FPA_Funktion_Freilauf | not active, active | |
| FPA_Funktion_MO | not active, active | |
| FPA_Funktion_GE | not active, active | |
| FPA_Funktion_ALR | not active, active | |
| FPA_Funktion_MO_BZS | not active, active | |
| FPA_Funktion_DR | not active, active | |
| BCmE_Live_Tipp | not active, active | |
| BCmE_Komfort_Verbrauch | ||
| BCmE_Standheizungsberechnung | not active, active | |
| BCME_LED_Filter | not active, active | |
| BCmE_Komfort_Reichweite | not active, active | |
| PASS_Funktion | not active, active | |
| MKE Funktion | not active, active | |
| MKE Variante | not active, active | |
| RWB_Funktion | not active, active | |
| HV-EM_Funktion | not active, active | |
| HV-EM_Reichweiten_Verlaengerung | not active, active | |
| HV-EM_Reichweiten_Verlaengerung_NV | not active, active | |
| HV-EM_Autonomes_Nachladen_NV | not active, active | |
| HV-EM_Anforderungsart_Autonomes_Nachladen | not active, active | |
| HV-EM_Funktion_5 | not active, active | |
| HV-EM_Funktion_6 | not active, active | |
| HV-EM_Funktion_7 | not active, active | |
| HV-EM_Klima_Codierung | ||
| AGW_Funktion | not active, active | |
| AGW_Input_Signal_Fussgaengerwarnung_Kamera | not active, active | |
| AGW_Input_Signal_Kollisionswarnung_Radar | not active, active | |
| EHR_Funktion | not active, active | |
| EHRLEHRPsd15ProviderVerbaut_CO | not installed, installed |
long coding 1
Byte 00
Bit 0 - Generator via LIN databause 1 (PR 7L3/7L6)
Bit 1 Battery data module via LIN databus 1 (PR7L6)
Bit 2 - 7 no description
Byte 01
Bit 0 Multi fnction steering wheel via LIN databus 2 (PR 1XW/1XX/2PF/2PK/2ZQ/2ZS)
Bit 1 - 7 no description
Byte 02
Bit 0 - 7 no description
Byte 03
Bit 0 - 1 no description
Bit 2 - 3 Start/Stop system
Bit 4 - 7 no description
Byte 04
Bit 0 - Start/Stop system
Bit 1 - Recuperation
Bit 2 - Shut off recommendation ignition/terminal
Bit 3 - Enabling for deep recuperation (PR 7L6)
Bit 4 - no description
Bit 5 - Voltage depression in idele (gasoline engines only)
Bit 6 - 7 no description
Byte 05
Bit 0 - 4 Battery location
Bit 4 - 7 no description
Byte 06
Bit 0 - 7 Engine type
Byte 07
Bit 0 - 7 no description
Byte 08
Bit 0 - dRIVE PROGRAM FUNCTIONS
Bit 1 - Personalization for driver program functions
Bit 2 - Play protection for drive program functions
Bit 3 - Display messages for drive program functions via bap
Bit 4 - Display for drive program functions in instrument cluster
Bit 5 - No description
Bit 6 - Button for drive program functions with interpretation via high side
Bit 7 - Missing data
Byte 09
Bit 0 - 7 no description
Byte 10
Bit 0 - 7 no description
Byte 11
Bit 0 - no description
Bit 1 - Drive program function 'advanced front lighting system (AFS)
Bit 2 - 7 no description
Byte 12
Bit 0 - 1 - no description
Bit 2 - Drive program function 'free wheel/clutch (PR EF1+gOr/g1a/g1c)
Bit 3 - 7 - no description
Byte 13
Bit 0 - Board computer with efficiency display function live tip
Bit 1 - Board computer with efficiency display function comfort consumption
Bit 2 - Board computer with efficiency dispaly function auxiliary heater calculation
Bit 3 - Board computer with efficiency display function LED Filter
Bit 4 - 6 - no description
Bit 7 missing data update please
Byte 14
Bit 0 - 7 - no description
Byte 15
Bit 0 - EASS function
Bit 1 - 7 - no description
Byte 16
Bit 0 - 7 - no description
Byte 17
Bit 0 - Fatigue detection (MKE)
Bit 1 - 7 - no description
Byte 18
Bit 0 - 7 Fatigue detection (MKE) - Variant
Byte 19
Bit 0 - 7 - no description
Byte 20
Bit 0 - 7 - no description
Byte 21
Bit 0 - 7 - no description
Byte 22
Bit 0 - 7 - no description
Byte 23
Bit 0 - 7 - no description
Byte 24
Bit 0 - 7 - no description
Byte 25
Bit 0 - 7 - no description
Byte 26
Bit 0 - 7 - no description
Byte 27
Bit 0 - 7 - no description
Byte 28
Bit 0 - 7 - no description
Byte 29
Bit 0 - 7 - no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
48V-System, Sperrung nach Crash aufheben
Deletion of a SWaP function
Erase counter for start and stop processes
Release of SWaP function
Reset of reversible crash shut off
Reset of the adaptations of the WakeUp-Monitor
Reset of the historical data for the WakeUp-Monitor
Resetting history memory
(IDE13058) Electrical_system_r eset_configuration
Output test
Analog clock test
Battery cell analysis
Component protection
Driving profile selection
Generator specified voltage value variable
Pause recommendation
Start valid authentication round
Static current analysis
Target generator voltage value 15V
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assemblyline mode (EOL)
Development mode
Control unit: 32 Lock Electronics |  |
Security Codes
none
Analysis 3
Analysis 4
Can output signal(s) status
Checksum calculations
Clutch temperature
Control module temperature
Cooling fin temperature
Data logger triggering
Difference front axle speed
Driving profile selection
Duration of overtemperature
Front left wheel speed
Front right wheel speed
Haldex clutch pump current
Haldex clutch pump PWM signal
Haldex clutch pump voltage
Haldex clutch status
Left rear wheel speed
Reset counter
Right rear wheel speed
Roller test bench mode, functinal
Security Access: number of invalid keys
Standard - ambient data 1
Status of actuator test
Status of basic setting
Voltage terminal 30
Pump_Calibration_Values
Upper Limit of Temperature Duration.
Long Coding 0
| Field Name | Possible Values | Information / Mapping LC1 |
| Activating and deactivating all development messages | not active, active | |
| Diff. lock | not installed, installed | |
| Vehicle_Chassis | Vehicle_Chassis_A_Class, Vehicle_Chassis_A_Class_Short, Vehicle_Chassis_A0_Class, Vehicle_Chassis_B_Class, Vehicle_Chassis_B_Class_Long, Vehicle_Chassis_D_Class, Vehicle_Chassis_Reserved, Vehicle_Chassis_Reserved_2 | |
| Final drive ration | Flixible, Ratio_3_0, Ratio_3_2, Ratio_3_4, Ratio_3_6, Ratio_3_8, Ratio_4_0, Ration_4_2 |
Long Coding 1
Byte 00
Bit 0 - 7 - No Description
Byte 01
Bit 0 - 7 - No Description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
Open 4 motion coupling for ignition cycle
Pump motor
Resetting of all adaptation values
Output test
Haldex clutch actuation
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
Diagnosis ode for safety-related systems
End of assemblyline mode (EOL)
IO Test Session
Development mode
| Control unit: 42 Door Electronics Driver Side |  |
Security Codes
20103
Long coding
Live data
Ambient illumination for speaker
Ambient light
Central window regulator switch
Child safety
Child safety lock button 2
Child Safety Lock Switch
Comfort function for front window regulator, driver side
Comfort function for rear window regulator, driver side
Dimming for interior ambient lighting
Dimming of inside door handle lighting
Distance impulses
Driver power window button
Driver side rear power window button
DWA Interior monitoring/vehicle inclination sensor button
Enable driver front window regulatory relay
Enable driver-side rear window regulator
Excess.temp.disconnect, rear window regulator, driver side
Excessive temper.disconnect, front window regulator, driv.side
Front driver side door status
Front window regulator relay, driver side
Front window regulator, reversing position, driver side.
Front window regulator status, driver side
Fule filler door release button
Function lighting child safety
Ident. of rear window regulator programming, driver side
Memory seat adjustment control head
Mirror adjustment (X/Y-direction)
Mirror adjustment switch
Mirror fold-in activation
Mirror fold-in, current consumption
Mirror folding position
Mirror heater
Mirror memory
Number of driving cycles without opening door
Outside air temperature
Play protection, mirror fold-in
Rear lid remote release button
Rear window regulator child lock, driver side
Rear window regulator relay, driver side
Rear window regulator reversing position, driver side
Rear window regulator status, driver side
Recognition of motor variant for window regul,
Security Access: number of invalid keys
Standard - ambient data 1
Status of actuator test
Status of basic setting
Supply voltage for door control module, front, driver side
Supply voltage for door control module, rear, left
Switch for inside door handle
Switch for outside door handle
synchronous mirror adjustment
Terminal 58xd dimmer
Terminal 58xs dimmer
Turn signal in exterior rear view mirror
Vehicle speed
Window lift, switch-over from front to rear
Window regulator child lock, driver side
Window regulator control unit, driver side
control_event_memory_driver_side_rear
Driver_Rear_VW_FAZIT_Identification_String
Status_of_Input_Output_Control_Subsystem_1
Status_of_Input_Output_Control_Subsystem_2
Window_Regulator_Driver_Side_Rear_Sleep_Indication
Window_Regulator_Driver_Side_Rear_VW_Workshop_System_Name
Long Coding 0
| Field Name | Possible Values | Cross Ref LC1 |
| Reserved | reserved_1, reserved_2 | |
| front_field_light | not_active, active | |
| ambient_light | not_active, active | |
| door_exit_light | not_active, active | |
| inside_door_handle_light | not_active, active | |
| turn_signal_repeater | not_active, active | |
| turn_off_front_field_light_with_folded_mirror | not_active, active | |
| loudspeaker_gate_illumination | not_active, active | |
| lock_without_safe_motor | not_active, active | |
| lock_unlock_switch | not_active, active | |
| flap_ulock | not_installed, installed | |
| trunk_lid_unlock | not_installed, installed | |
| keyless_entry | not_active, active | |
| sliding_door | not_active, active | |
| inside_outside_door_handle | not_active, active | |
| Electric_childproof_Lock | not_active, active | |
| sun_glas | not_installed, installed | |
| short_drop | not_active, active | |
| hall_sensor_positioning | not_active, active | |
| window_lifter_automatic | not_active, active | |
| electrical_folding_roof_control | not_installed, installed | |
| shortened_block_time | not_active, active | |
| pre_short_drop | not_active, active | |
| force_limitation | force_limitation_active, force_limitation_not_active | |
| mirror_heating | not_installed, installed | |
| memory_mirror | not_active, active | |
| mirror_lowering_with_rear_gear | not_active, active | |
| position_memory_with_rear_gear | not_active, active | |
| mirror_folding | not_installed, installed | |
| PTC_mirror_heating | resistance_heating, PTC_heating | |
| mirror_comfort_folding | not_active, active | |
| Mirror_Synchronous_Adjustment | not_active, active | |
| steering | left_steering_car, right_steering_car | |
| light_tank | not_active, active | |
| special_function_vehicle | not_active, active | |
| convertible_car | not_active, active | |
| Window_Regulator_Motor_Type_Recognition | Dataset_auto, Dataset_1, Dataset_2, Dataset_3, reserved_1, reserved_2, reserved_3, reserved_4, reserved_5, reserved_6 | |
| LIN_bus | not_active, active | |
| passenger_seat_memory | not_installed, installed | |
| seatbelt_feeder | not_active, active | |
| glove_compartment_locking | not_active, active | |
| switch_resistance_coding | not_active, active | |
| reversible_seat_belt_tightener | not_installed, installed | |
| electro_chromatic_mirror | not_active, active | |
| mirror_heater_single_trigger | not_active, active | |
| rear_window_heater_trigger | not_active, active | |
| speed_threshold_mirror_folding | not_active, active | |
| speed_threshold_window_lifter | not_active, active | |
| central_window_regulator switch | not_active, active | |
| inverted_short_drop | not_active, active | |
| window_regulator_front_back_switch | not_active, active | |
| window_regulator_automatic_delay | not_active, active | |
| ACC_door_contact | not_active, active | |
| inner_room_and_car_gradient_alarm_switch | not_active, active | |
| fond_window_regulator_multiblock | not_active, active | |
| fond_control_panel_seat_adjustment | not_active, active |
Long Coding 1
Byte 00
Bit 0 - 7 no description
Byte 01
Bit 0 - Door entry lights
Bit 1 - Ambient lighting
Bit 2 - Door exit light
Bit 3 - Interior door handle ilumination
Bit 4 - Mirror turn signals
Bit 5 - Door entry lights not active while mirrors folded
Bit 6 - Mirror/door handle/speaker lights
Bit 7
Byte 02
Bit 0 - Safe motor
Bit 1 - Lock/unlock button
Bit 2 - Fuel lid unlock button
Bit 3 - Rear lid unlock button
Bit 4 - Keyless entry system
Bit 5 - 6 no description
Bit 7 Child lock/protection
Byte 03
Bit 0 - 4 no description
Bit 5 Reduced blocking time
Bit 6 - 7 no description
Byte 04
Bit 0 - Heated mirrors
Bit 1 - no description
Bit 2 - Reverse gear mirror dipping
Bit 3 - Position memory for reverse gear mirror dipping
Bit 4 - Foldable mirrors
Bit 5 - PTC Mirror heating
Bit 6 - Comfort mirror folding
Bit 7 Synchronous mirror adjustment
Byte 05
Bit 0 - Right Hand Drive
Bit 1 - 7 no description
Byte 06
Bit 0 -3 - Window motor type (Variant 5 = Bit 2 ticked)
Bit 4 - 7 - no description
Byte 07
Bit 0 - LIN Databus
Bit 1 - 6 - no description
Bit 7 Presafe system
Byte 08
Bit 0 - 7 no description
Byte 09
missed this one
Byte 10
Bit 0 - Seat ejection system
Bit 1 - 3 - no description
Bit 4 Window motor post run (Except NA Region)
Bit 5 - 7 - no description
Byte 11
Bit 0 - Adaptive cruise control
Bit 1 - Interior monitor and inclination sensor button conbined
Bit 2 - 7 - no description
Adaptations
use following link to spreadsheet with all adaptations channel details link
Basic Settings
Adapt front window regulator, driver side
Adapt rear window regulator, driver side
Front window regulator, driver side
Front window regulator, driver side, reset adaptation
Rear window regulator, driver side
Rear window regulator, driver side, reset adaptation
Recognition of motor variant for window regul
Reset standardization, front window regulator, driver side
Reset standardization, rear window regulator, driver side
Test sequence for central locking
Output Test
Central locking
Front window regulator, driver side
lighting
Mirror adjustment (X/Y - direction)
Mirror fold-in
Mirror heater
Rear window regulator, driver side
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
| Control unit: 44 Steering Assistance |  |
Security Codes
28183,44595,19249,40304,20103,40168,25004,11966,15081,24990,37202,31857,24435,10815,11122,14108,14451,25377,25757,32304,33776,33777,37201,37203,37483,
33799,01138,01295,01972,02168
Active reset
Battery terminal recognition
Control module temperature
Counter
Counter steer support
Data logger triggering
Development messages
Driving profile selection
Long Coding 0
| Field Name | Possible Values | Cross Ref LC1 / Info |
| Counter steer support | not active, active | Byte 0 - Bit 2 & 3 |
| Parallel parking assistance | not active, active | Byte 0 - Bit 1 |
| Pull compensation | not active, active | Byte 0 - Bit 2 & 3 |
| Lane assist | not active, active | Byte 0 - Bit 4 |
| Steering angle sensor | ||
| Powertrain hybrid | not installed, installed | |
| Driving profile selection | not active, active | Byte 0, Bit 7 |
| Rampenverhalten bei Motorstop | not active, active | Ramp behavior at engine stop |
| Electronic Stability Program | not active, active |
Long Coding 1
Byte 00
Bit 0 - Driver steering recommendations
Bit 1 - Park steer assist
Bit 2 - 3 - Torque steer compensation
Bit 4 - Lane assist
Bit 5 - External steering angle sensor
Bit 6 - no description
Bit 7 - Driving profile selection
Byte 01
Bit 0 - 7 no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic settings
Reset to factory setting
Resetting of all adaptation values
Resetting of all adaptations
Software end-stop reset
Steering angle sensor
Steering angle sensor, initialization
Steering angle sensor, move to mechanical center
Steering angle sensor, zero calibration w/steer. wheel scales
Output test
Reserved
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
Control unit: 52 Door Electronics Passenger Side |  |
Security Codes
none
Long coding
Live data
Ambient illumination for speaker
Ambient light
Comfort function for front window regulator, frt.pass.side
Comfort function for rear window regulator, frt.pass.side
Dimming for interior ambient lighting
Dimming of inside door handle lighting
Distance impulses
Enable front passenger window regulator relay
Enable frt.pass.-side rear window regulator
Excess.temp.disconnect, front window regulator, frt.pass. side
Excess temp.disconnect for rear window regulator, frt.pass.side
Front passenger power window button
Front passenger side door status
Front passenger side rear power window button
Front window regulator relay, frt.pass. side
Front window regulator reersing position, frt.pass. side
Front window regulator status, frt.pass. side
Ident. of rear window regulator programming, frt.pass. side
Memory seat adjustment control head
Mirror adjustment (X/Y-direction)
Mirror fold-in activation
Mirror fold-in, current consumption
Mirror folding position
Mirror heater
Mirror memory
Outside air temperature
Play protection, mirror fold-in
Rear window regulator child lock, frt.pass. side
Rear window regulator reversing position, frt.pass. side
Rear window regulator status, frt.pass side
Recognition of motor variant for window regul,
Security Access: number of invalid keys
Standard - ambient data 1
Status of actuator test
Status of basic setting
Supply voltage for door control module, front, frt.pass side
Supply voltage for door control module, rear, frt.pass. side
Switch for inside door handle
Switch for outside door handle
Terminal 58xd dimmer
Terminal 58xs dimmer
Turn signal in exterior rear view mirror
Vehicle speed
Window regulator child lock, frt.pass. side
control_event_memory_passenger_side_rear
Passenger_Rear_VW_FAZIT_Identification_String
Status_of_Input_Output_Control_Subsystem_1
Status_of_Input_Output_Control_Subsystem_2
Window_Regulator_Passenger_Side_Rear_Sleep_Indication
Window_Regulator_Passenger_Side_Rear_VW_Workshop_System_Name
Long Coding 0
| Field Name | Possible Values | Mapping to LC1 / Details |
| Reserved | reserved_1, reserved_2 | |
| front_field_light | not_active, active | |
| ambient_light | not_active, active | |
| door_exit_light | not_active, active | |
| inside_door_handle_light | not_active, active | |
| turn_signal_repeater | not_active, active | |
| turn_off_front_field_light_with_folded_mirror | not_active, active | |
| loudspeaker_gate_illumination | not_active, active | |
| lock_without_safe_motor | not_active, active | |
| lock_unlock_switch | not_active, active | |
| flap_unlock | not_installed, installed | |
| trunk_lid_unlock | not_installed, installed | |
| keyless_entry | not_active, active | |
| sliding_door | not_active, active | |
| inside_outside_door_handle | not_active, active | |
| Electric_Childproof_Lock | not_active, active | |
| sun_glas | not_installed, installed | |
| short_drop | not_active, active | |
| hall_sensor_positioning | not_active, active | |
| window_lifter_automatic | not_active, active | |
| electrical_folding_roof_control | not_installed, installed | |
| shortened_block_time | not_active, active | |
| pre_short_drop | not_active, active | |
| force_limitation | force_limitation_active, force_limitation_not_active | |
| mirror_heating | not_installed, installed | |
| memory_mirror | not_active, active | |
| mirror_lowering_with_rear_gear | not_active, active | |
| position_memory_with_rear_gear | not_active, active | |
| mirror_folding | not_installed, installed | |
| PTC_mirror_heating | resistance_heating, PTC_heating | |
| mirror_comfort_folding | not_active, active | |
| Mirror_Synchronous_Adjustment | not_active, active | |
| steering | left_steering_car, right_steering_car | |
| light_tank | not_active, active | |
| special_function_vehicle | not_active, active | |
| convertible_car | not_active, active | |
| Window_Regulator_Motor_Type_Recognition | Dataset_auto, Dataset_1, Dataset_2, Dataset_3, reserved_1, reserved_2, reserved_3, reserved_4, reserved_5, reserved_6 | |
| LIN_bus | not_active, active | |
| passenger_seat_memory | not_installed, installed | |
| seatbelt_feeder | not_active, active | |
| glove_compartment_locking | not_active, active | |
| switch_resistance_coding | not_active, active | |
| reversible+seat_belt_tightener | not_active, active | |
| electro_chromatic_mirror | not_active, active | |
| mirror_heater_single_triger | not_active, active | |
| rear_window_heater_trigger | not_active, active | |
| speed_threshold_mirror_folding | not_active, active | |
| speed_threshold_window_lifter | not_active, active | |
| central_window_regulator_switch | not_active, active | |
| inverted_short_drop | not_active, active | |
| window_regulator_front_back_switch | not_active, active | |
| window_regulator_automatic_delay | not_active, active | |
| ACC_door_contact | not_active, active | |
| inner_room_and_car_gradient_alarm_switch | not_active, active | |
| fond_window_regulator_multiblock | not_active, active | |
| fond_control_panel_seat_adjustment | not_active, active |
Long Coding 1
Byte 00
Bit 0 - 7 no description
Byte 01
Bit 0 - Door entry lights
Bit 1 - Ambient lighting
Bit 2 - Door exit light
Bit 3 - Interior door handle ilumination
Bit 4 - Mirror turn signals
Bit 5 - Door entry lights not active while mirrors folded
Bit 6 - Mirror/door handle/speaker lights
Bit 7
Byte 02
Bit 0 - Safe motor
Bit 1 - Lock/unlock button
Bit 2
Bit 3
Bit 4 - Keyless entry system
Bit 5 - 6 no description
Bit 7
Byte 03
Bit 0 - 4 no description
Bit 5 Reduced blocking time
Bit 6 - 7 no description
Byte 04
Bit 0 - Heated mirrors
Bit 1 - Mirror memory function (with memory seats)
Bit 2 - Reverse gear mirror dipping
Bit 3 - Position memory for reverse gear mirror dipping
Bit 4 - Foldable mirrors
Bit 5 - PTC Mirror heating
Bit 6 - Comfort mirror folding
Bit 7 - Synchronous mirror adjustment
Byte 05
Bit 0 - Right Hand Drive
Bit 1 - 7 no description
Byte 06
Bit 0 -3 - Window motor type (Variant 5 = Bit 2 ticked)
Bit 4 - 7 - no description
Byte 07
Bit 0 - LIN Databus
Bit 1 - 6 - no description
Bit 7 - Presafe system
Byte 08
Bit 0 - 7 no description
Byte 09
Bit 0 - 7 no description
Byte 10
Bit 0 - Seat ejection system
Bit 1 - 3 - no description
Bit 4 - Window motor post run (Except NA Region)
Bit 5 - 7 - no description
Byte 11
Bit 0 - Adaptive cruise control
Bit 1 - Interior monitor and inclination sensor button conbined
Bit 2 - 7 - no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic Settings
Adapt front window regulator, frt.pass. side
Adapt rear window regulator, frt.pass.side
Front window regulator, frt.pass. side, reset adaptation
Rear window regulator, front passenger side
Rear window regulator,frt.pass. side, reset adaptation
Recognition of motor variant for window regul.
Reset standardization, front window regulator, frt.pass side
Reset standardization, rear window regulator, frt.pass. side
Test sequence for central locking
Window regulator front passenger side.
Output test
Central locking
Lighting
Mirror adjustment (X/Y - direction)
Mirror fold-in
Mirror heater
Rear window regulator, front passenger side
Window regulator front passenger side
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
| Control unit: 55 Headlight Regulation |  |
Security Codes
20103
Ambient brightness
Analysis 1
Data logger triggering
Driving profile selection
Engine start using start stop function
Engine stop using start stop function
Front jounce travel
Left front level control system sensor
Left front level ctrl sys sensor, adaptation value (zero pos)
Left headlight beam adjusting motor, specified value
Left headlight beam adjusting motor, status
Left rear level control system sensor
Left rear level ctrl sys sensor, adaptation value (zero pos)
Left-/right hand driving switch-over
Low beam
Motor status
Rear jounce travel
Right headlight beam adjusting motor, specified value
Right headlight beam adjusting motor, status
Security Access: number of invalid keys
Status of basic headlamp setting
Status of basic setting
Status reverse gear
Steering wheel angle
Supply voltage for external components
Vehicle speed
Voltage terminal 15
Headlight levelling control state
Left headlight levelling control value
Right headlight levelling control value
Long Coding 0
| Field Name | Possible Values | LC1 Mapping / Info |
| vehicletype | enter new value | |
| rain_light_sensor | installed, not installed | |
| Left-/right hand driving switch-over | right_traffic, left_traffic | |
| source_leveling_information | source_leveling_information_can, source_leveling_information_sensor | |
| chassis_unit | Verbundlenkerhinterachse, Mehrlenkerhinterachse Frontantrieb, Mehrlenkerhinterachse 4-Motion, Reserve | |
| start_stop | Not support, Supported | |
| steering_curve | normal, mqb_direct_steering | |
| lwr_sensors | 1_sensor, 2_sensors | |
| lwr_activation | enabled, not enabled | |
| highway light | enabled, not enabled |
Long Coding 1
Byte 00
Bit 0 - 4 - Model
Bit 5 - 7 - no description
Byte 01
Bit 0 - no description
Bit 1 - Rain/Light sensor
Bit 2 - Left hand drive
Bit 3 - no descriptin
Bit 4 - 5 - Rear axle type
Bit 6 - no description
Bit 7 - Start/stop function
Byte 02
Bit 0 - 7 - no description
Byte 03
Bit 0 - 7 - no description
Byte 04
Bit 0 - Headlight regulation
Bit 1 - 7 no description
Byte 05
Bit 0 - 7 - no description
Byte 06
Bit 0 - 7 - no description
Byte 07
Bit 0 - 7 - no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic Settings
Acknowledge basic setting
Basic headlamp setting
Resetting of all adaptations
Output test
Move headlamp vertically to the left
Move headlamp vertically to the right
Yellow warning lamp
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
| Control unit: 5F Information Control Unit |  |
Security Codes
20103
ABTiminStdNvHG
ECE 2014
Live Data
Activation for housing fan
Angle of turn sensor for navigation
BAP
Bluetooth
Bluetooth device address
Bluetooth: connected device 1
Bluetooth: connected device 2
Bluetooth: connected device 3
Bluetooth: connected device 4
Bluetooth: connected device 5
Bluetooth: Paired device 1
Bluetooth: Paired device 2
Bluetooth: Paired device 3
Bluetooth: Paired device 4
Bluetooth: Paired device 5
Bluetooth: visibility
Card reader
Card reader 2
Control head button operation
Data logger triggering
Engine speed
External multimedia device interface
GPS Almanac
GPS position
GPS signal strength
GPS time
Individualization characteristic
Last wake-up cause
Malfunction status
Mechanics of display unit 1 for multimedia systems
Media type in optical drive
Microphone current consumption
Microphone override meter
MOST address
Multimedia display unit 1
Mute
Navigation calibration
Navigation corrected position
Network diagnosis
No. of unscheduled ECU resets
Over-temperature protection for amplifier
Pressing a button
Proximity detection for touchscreen 1
Public key for SWaP function
Radio tuner 1
Radio tuner 2
Release code for a SWaP function
Ring break diagnostic line status
Ring break diagnostic results
Roller test bench mode functional
Satellite radio tuner status
Security Access number of invalid keys
Speaker status
Speed-dependent volume adjustment
Standard - ambient data 1
Status GPS reception
Status of active media source at output 1
Status of all SWaP functions
Status of antenna 1 for radio
Status of antenna 2 for radio
Status of digital radio antenna 1
Status of GPS antenna
Status of telephone
Status of tune for digital radio (DAB)
Status terminal S
System run time
Temperature of MMX PC boards
Temperature of MOST transceiver
Temperature of processor circuit board
Temperature, audio amplifier
Temperature, optical drive
Terminal 15 status
Terminal 50 status
Terminal 58xd dimmer
Terminal 58xs dimmer
Terminal 75 status
Total system run time
Traffic information
Update software via medium
USB connection
Vehicle speed
Vehicle state
Video input status
Voice operation last detected command
Voltage terminal 30
Wake-up cause
Byte-Coding-cONDITION
DAB_FM_linking
GPS_Count_Satellite_Phase_Lock_Counter
GPS_Satellite_Code_Loce_Counter
Last_System_Operating_Time
Last_System_Starting_Time
Navigation_Calculated_Direction
SDARS_module_information
SDARS_Service
SDARS_subscription_status
Status_Position_Touchscreen_1
Theft_protection_error_counter.
Long Coding 0
| Field Name | Possible Values | Mapping to LC1 |
| byte_0_brand | no_brand, VW, SKODA, SEAT, BENTLEY, AUDI, VW-NFZ, reserved_text, PORSCHE, MAN, LAMBORGHINI | |
| byte_1_Car_Class | 0 - 9 | |
| byte_1_Car_Generation | 0 - 9 | |
| byte_2_Car_Derivate | 0 - 9 | |
| byte_2_Car_Derivate_Supplement | 0 - 9 | |
| byte_3_Country_Navigation | no_country, EU, NAR, MSA, Korea, China, Japan, AsiaPasific, Australia, South_Africa, NEAST, NMAfrica, MEAST, CentralAsia, India, Israel, reserved_text, Taiwan, Chile, China_2, China_3 | |
| byte_4_Channel_1_HT | not installed, installed | |
| byte_4_Channel_2_TT | not installed, installed | |
| byte_4_Channel_3_HT | not installed, installed | |
| byte_4_Channel_3_TT | not installed, installed | |
| byte_4_Channel_4_HT | not installed, installed | |
| byte_4_Channel_4_TT | not installed, installed | |
| byte_5_Channel_5_HT | not installed, installed | |
| byte_5_Channel_5_TT | not installed, installed | |
| byte_5_Channel_6_HT | not installed, installed | |
| byte_5_Channel_6_TT | not installed, installed | |
| byte_5_Channel_7_HT | not installed, installed | |
| byte_5_Channel_7_TT | not installed, installed | |
| byte_5_Channel_8_HT | not installed, installed | |
| byte_5_Channel_8_TT | not installed, installed | |
| byte_6_Channel_9_HT | not installed, installed | |
| byte_6_Channel_9_TT | not installed, installed | |
| byte_6_Channel_10_HT | not installed, installed | |
| byte_6_Channel_10_TT | not installed, installed | |
| byte_6_Channel_11_HT | not installed, installed | |
| byte_6_Channel_11_TT | not installed, installed | |
| byte_6_Channel_12_HT | not installed, installed | |
| byte_6_Channel_12_TT | not installed, installed | |
| byte_7_Channel_13_HT | not installed, installed | |
| byte_7_Channel_13_TT | not installed, installed | |
| byte_7_Channel_14_HT | not installed, installed | |
| byte_7_Channel_14_TT | not installed, installed | |
| byte_7_Channel_15_HT | not installed, installed | |
| byte_7_Channel_15_TT | not installed, installed | |
| byte_7_Channel_16_HT | not installed, installed | |
| byte_7_Channel_16_TT | not installed, installed | |
| byte_8_Microphone_1 | not installed, installed | |
| byte_8_Microphone_2 | not installed, installed | |
| byte_8_Headphones_Output_1 | not installed, installed | |
| byte_8_Headphones_Output_2 | not installed, installed | |
| byte_8_AUX_IN | Off, On | |
| byte_8_AMI | Off, On | |
| byte_8_VDA-NF_IN | Off, On | |
| byte_9_Band_Settings_FM_Tuner | EU_RdW, NAR, JP, KOR, no_set, reserved_text, CN, BRA, KOR_2, JP_2 | |
| byte_10_Band_Settings_DAB_Tuner_Band_1 | EU_Band_III-N, EU_Band_III, Canada_1_Band, Korea_Band_111, China_Band_111, Download_Table_1, Off, New_Zealand_Band_111, reserved_text. | |
| byte_10_Band_Settings_DAB_Tuner_Band_2 | L_Band, Download_Table_2, Off, reserved_text | |
| byte_11_Sound_System | Sound_System_no_Allocation, Spimd_System_Internal, Sound_Stystem_external_MOST, reserved_text, Soud_System_external_BAP, Sound_System_Internal_individual, Sound_System,external_BOOSTER, Sound_System_external_BAP_with_presets. | |
| byte_12_FM_Antenna | available, Not available | |
| byte_12_HD_FM_Antenna_Mode | AM_FM_ANT, Switching, FM_ANT, MRC, Testmode | |
| byte_13_RDS | not_deactivated, deactivated | |
| byte_13_AF | persistent, temporary | |
| byte_13_hd_radio_coding | Not activated, activated | |
| byte_13_Radio_Text_Plus | Not activated, activated | |
| byte_13_PI_Ignore | On, Off | |
| byte_13_BWS | BWS_restricted, BWS_unrestricted, BWS_restricted_unrestricted, no_BWS | |
| byte_13_dab_Alarm_Annoucement | Not activated, activated | |
| byte_14_FM_PTY31_Alarm | On, Off | |
| byte_14_AM_disable | Not activated, activated | |
| byte_14_multiple_entry_switch | On, Off | |
| byte_14_RDS_deactivation | No, Yes | |
| byte_14_AF_deactivation | No, Yes | |
| byte_15_Baseplate | Installed, Not Installed | |
| byte_15_Antenna_Baseplate | Installed, Not Installed | |
| byte_15_Cradle_Force | Yes, No | |
| byte_15_Handy_in_Cradle_Force | Yes, No | |
| byte_15_Phone_NAD | On, Off | |
| byte_16_Bluetooth_Availability | Not available, available | |
| byte_16_Bluetooth_Multimedia_Functionality | Not available, available | |
| byte_16_Bluetooth_Phone | Not available, available | |
| byte_16_Bluetooth_Audio | Not available, available | |
| byte_16_Bluetooth_Visibility | On, Off | |
| byte_16_Bluetooth_Headphones | On, Off | |
| byte_17_Skinning | no_Skin, Skin_1, Skin_2, Skin_3, Skin_4, Skin_5, Skin_6, Skin_7, Skin_8, reserved_text | |
| byte_18_Screenings | 0 - 255 | |
| byte_19_Log_Book | not_displayed, displayed | |
| byte_19_Suspension_Arm_Side | left_hand_drive, right_hand_drive | |
| byte_19_Kombi_Track_Station_Info | long_info, short_info, Not available, reserved_text | |
| byte_19_Rear_View_Low | Not activated, activated | |
| byte_19_Most | Off, On | |
| byte_19_USB | Off, charge, full, usb_ipod | |
| byte_20_display_1 | not connected, connected | |
| byte_20_display_2 | not connected, connected | |
| byte_20_display_3 | not connected, connected | |
| byte_20_display_4 | not connected, connected | |
| byte_20_dashboard_audio_slide | Off, On | |
| byte_20_dashboard_phone_slide | Off, On | |
| byte_20_dashboard_navigation_slide | Off, On | |
| byte_20_dashboard_communication | BAP, DDP2 | |
| byte_21_Scrolling | Off, On | |
| byte_21_Messaging_via_MAP | Off, On | |
| byte_21_Pagewise_scrolling | Off, On | |
| byte_22_Dashboard_Graphic_Variant | MOST, via CAN | |
| byte_22_Dashboard_Text_Replacement | Off, On | |
| byte_22_wheel_drive | front, rear, all, reserved_text | |
| byte_23_Speller | Off, On | |
| byte_23_initial_Disclaimer | Off, On | |
| byte_23_Display_Turn_Out_Speed | normal, fast | |
| byte_24_Emergency_Call | Off, On | |
| byte_24_Voice_Control_System. | Not activated, activated | |
| byte_24_Navigation_System | Not activated, activated | |
| byte_24_WLAN_Module | Not activated, activated | |
| byte_24_Import_Media_Data | Not activated, activated | |
| byte_24_vza | Not activated, activated | |
| byte_24_psd | Not activated, activated | |
| byte_14_hd_radio_coding_am | Not activated, activated | |
| byte_21_viwi | Off, On | |
| byte_22_Keypad_Rear_Keys | Not available, available | |
| byte_15_Wireless_Charging_Availability | Installed, Not Installed | |
| byte_15_Media_Player_1 | not_connected, connected_without_USB_hub, connected_with_USB_hub | |
| byte_22_bap_sds_sd | Off, On | |
| byte_12_Microphone_3 | not connected, connected | |
| byte_12_Microphone_4 | not connected, connected | |
| byte_16_legal_rvc | Yes, No | |
| byte_22_bap_online_function_secondary_display | Off, On | |
| byte_8_Wake_Up_Over_ECL | Not activated, activated | |
| byte_21_gps_antenna_Availability | Not activated, activated | |
| byte_12_DAB_antenna_1 | Not activated, activated | |
| byte_12_AM_FM_DAB_antenna | Not activated, activated | |
| byte_22_Touch_Screen_Remote | Off, On | |
Long Coding 1 - please note it appears that all descriptions are in list above
Byte 00
Bit 0 - 7 no description
Byte 01
Bit 0 - 7 no description
Byte 02
Bit 0 - 7 no description
Byte 03
Bit 0 - 7 no description
Byte 04
Bit 0 - 7 no description
Byte 05
Bit 0 - 7 no description
Byte 06
Bit 0 - 7 no description
Byte 07
Bit 0 - 7 no description
Byte 08
Bit 0 - 7 no description
Byte 09
Bit 0 - 7 no description
Byte 10
Bit 0 - 7 no description
Byte 11
Bit 0 - 7 no description
Byte 12
Bit 0 - 7 no description
Byte 13
Bit 0 - 7 no description
Byte 14
Bit 0 - 7 no description
Byte 15
Bit 0 - 7 no description
Byte 16
Bit 0 - 7 no description
Byte 17
Bit 0 - 7 no description
Byte 18
Bit 0 - 7 no description
Byte 19
Bit 0 - 7 no description
Byte 20
Bit 0 - 7 no description
Byte 21
Bit 0 - 7 no description
Byte 22
Bit 0 - 7 no description
Byte 23
Bit 0 - 7 no description
Byte 24
Bit 0 - 7 no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic Settings
Bluetooth:delete coupled device
Deletion of a SWaP function
Infotainment recorder
Release of SWaP function
Reset navigation calibration
Reset to factory setting
Start ring break diagnostic
Frequency_Seek_AM
Frequency_Seek_FM
Service_Seek_DAB
Output test
Acoustic check of loudspeakers
Activation for housing fan
Component protection
Diagnostic connection for external audio sources
Eject optical medium\(CD/DVD Eject)
Electrical test of loudspeakers
Establish connection to last Bluetooth device
Mechanics of display unit 1 for multimedia system
Remote control for AM frequency selection
Remote control for digital radio service selection (DSB)
Remote control for fader
Remote control for FM frequency selection
Remote control for satellite radio station selection
Remote control for selecting the audio source
Remote control for voice operation
Remote control for volume
Remote control frequency selection digital radio (band 111)
Remote control frequency selection digital radio (band L)
Search for Bluetooth devices
Status remote control
Test image display unit 1 for multimedia system
Operation_Unit_Simulation_Control_Knob
Operating_Unit_Simulation_Keys
Operating_Unit_Simulation_Volume
Remote_Seek_Activation
Remote_Set_AF
Remote_Set_AUX_Sensitivity
Remote_Set_Concealment_Level
Remote_Set_DAB_Announcement
Remote_Set_DAB_Default
Remote_Set_DAB_Linking
Remote_Set_DAB_Mute
Remote_Set_DRC
Remote_Set_dyn_ZF
Remote_Set_GALA
Remote_Set_Hidden_Tune
Remote_Set_Highcut
Remote_Set_IBOC_Service
Remote_Set_LBand
Remote_Set_Loudness
Remote_Set_Mute
Remote_Set_Phase_Diversity
Remote_Set_Sound_Settings
Remote_Set_TP
Remote_Shift_Frequency_AM_Activation
Remote_Shift_Frequency_DAB_Activation
Remote_Shift_Frequency_FM_Activation
Rremote_Volume_Potentiometer_Control
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assembly line mode (EOL)
Development mode
| Control unit: 76 Parking Assistance |  |
Security Codes
71679
Audio reduction factory setting
Audio reduction request
Cause of park assist switching off
Convertible factory setting offset for volume level 1
Data logger triggering
Decay time for left front center park assist sensor
Decay time for left front park assist sensor
Decay time for right front center park assist sensors
Decay tie for right front park assist sensors
Diagnostic mode
Direct distance of left front center park assist sensor
Direct distance of left front park assist sensor
Direct distance of left rear center park assist sensor
Direct distance of left rear park assist sensor
Direct distance of right front center park assist sensor
Direct distance of right front park assist sensor
Direct distance of right rear center park assist sensor
Direct distance of right rear park assist sensor
Distance of left rear center park assist sensors
Distance of left rear park assist sensor
Distance of right front park assist sensors
Distance of right rear center park assist sensors
Distance of right rear park assist sensor
Distance sensor for left front center park assist
Distance sensor for right front center park assist
Driving direction
Factory setting for increment for cenvertible volume levels
Factory setting for park assist volume/frequencies
Increment for convertible volume levels
Indir. distance left front center to right fr. center sensor
Indir. distance left rear center to right rr.center sensor
Indir. distance fright front center to left fr.center sensor
Indir. distance right rear center to left rr. center sensor
Indirect distance of left front to left front center sensors
Indirect distance of left rear center to left rear sensors
Indirect distance of left rear to left rear center sensors
Indirect distance of right front center to right front sensors
Indirect distance of right front to right front center sensors
Indirect distance of right rear to right rear center sensors
No. of unscheduled ECU resets
Number of prevented stop processes
Oscillating time of left rear center park assist sensors
Oscillating time of left rear park assist sensors
Oscillation time of right rear center park assist sensors
Oscillating time of right rear park assist sensors
Outside air temperature
Outside air temperature internally calculated
Park assist activation tone
Park assist button
Parking aid input signal
Personalization 1 for park assist
Personalization 2 for park assist
Personalization 3 for park assist
Personalization 4 for park assist
Prevented stop processes (ring memory)
Resulting distance of front sensors
Resulting distance of rear sensors
Security Access: number of invalid keys
Sound output for park assist in selector lever position P
Speaker frequency for front park assist
Speaker frequency for rear park assist
Speaker volume for front park assist
Speaker volume for rear park assist
Standard - ambient data 1
Start-stop conditions
Status of actuator test
Status of basic setting
Stop process prevented
Supply voltage for park assist sensor
Switch-off speed for parking assist
System condition of park assist
Temporary function limita-tion due to environmental influences
Vehicle speed
Voltage terminal 15
Dimming_Signal_Terminal_58xd_pdc_pla
Long Coding 0
| Field Name | Possible Values | Mapping to LC1 |
| Transmission | Man. trans. , Automatic | |
| Start-stop function, coding information | Start-stop function in control module not active, Start-stop function in control module active | |
| Trailer | without trailer hitch, Trailer hitch (manually removable), Pivoting trailer hitch | |
| Distance regulation | Not activated, activated | |
| Activation of park assist | Manual, automatic | |
| Directional stabilization assist w. power steering assistance | not installed, installed | |
| Visual display for park assist | not installed, OPS display | |
| BAP | Not activated, activated | |
| Camera type | not installed, Rearview camera, Environmental camera, Camera system, Japan version | |
| Mute | Not activated, activated | |
| Limited operation | Not available, available | |
| Vehicle path display | without vehicle path display, with vehicle path display | |
| Wheels sensors with detection of direction of rotation | not installed, installed | |
| Coding information | Not coded, coded | |
| Hybrid/electric drive | not installed, Hybrid drive, Electric drive | |
| Parking assistant | not installed, installed- |
Long Coding 1
Byte 00
Bit 0 - 7 no description
Byte 01
Bit 0 - 7 no description
Byte 02
Bit 0 - 7 no description
Byte 03
Bit 0 - 7 no description
Byte 04
Bit 0 - 7 no description
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Basic Settings
Erase counter for start and stop processes
Resetting of all adaptations
Output Test
Activation of park assist
Front park assist speaker
Park assist speaker
Parking Aid Indicator Light
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assemblyline mode (EOL)
Development mode
| Control unit: A5 Front Sensors Driver Assistance System |  |
Security Code
20103,63522
Long coding 0
==========| Field Name | Possible Values | Mapping to Long Coding 1 |
| coding_HCA | Not coded, coded, reserved | |
| coding_VZE | Not coded, coded, reserved | |
| coding_Light_Assist | no_Light_Assist, High_Beam_Assist, Dynamic_Light_Assist, Adaaptive_Headlight_Range_Control, Matrixbeam, reserved | |
| FLA_Additional_High_Beam | Not coded, coded, reserved | |
| VZE_RSR_region | no_information, Westeurope, reserved | |
| VZE_Brand | no_information, Audi, VW, Skoda, Seat, Porsche, reserved | |
| VZE_Cam_type | ||
| VZE_Navigationtype | no Navigation, reserved, reserved, MIB1 High, MIB1 Std, MIB2 High PSD 1.4, MIB2 Std, reserved, MIB2 High PSD 1.5 | |
| windshield kind (transmissions) | Heat-insulating glass (green), clear glass (clear), Laminated glass (IRR), reserved | |
| FLA_Headinglight_type | Halogen, Halogen-AFS, Xenon, Bi-Xenon, Bi-Xenon-AFS, LED, reserved | |
| HCA_Mobility_Char | without, with, reserved | |
| HCA_LaneChangeassist | without, with, reserved | |
| ACC_installed | no, yes, reserved | |
| HCA_country_coding | RDW, Japan, reserved | |
| Steeringside of vehicle | Left-hand drive, Right-hand drive, reserved | |
| Windscreen_heater | Not coded, coded, reserved | |
| trailer_control_module | not installed, installed, reserved |
Long coding 1
Byte 00
Bit 0 - 7 - Lane Assist
Byte 01
Bit 0 - 7 - Traffic sign recognition
Byte 02
Bit 0 - Light/High beam assist - Mode 1 - Light Assist
Bit 1 - 7 - Light/High beam assist
Byte 03
Bit 0 - High beam assist additional high beams
Bit 1 - 7 no description
Byte 04
Bit 0 - Traffic sign recognition region - Western Europe
Bit 1 - 7 Traffic sign recognition region
Byte 05
Bit 0 - 1 Vehicle manufacturer
Bit 2 - Vehicle manufacturer - Seat
Bit 3 - 7 Vehicle manufacturere
Byte 06
Bit 0 - 7 Camera type
Byte 07
Bit 0 - 7 - Navigation system type
Byte 08
Bit 0 - 7 - Windshield type
Byte 09
Bit 0 - 7 - Headlight type
Byte 10
Bit 0 - 7 - Lane Assist - Bit 0 = Active
Byte 11
Bit 0 - 7 - Lane change assist - Bit 0 = Installed
Byte 12
Bit 0 - 7 - Adaptive cruise control - Bit 0 = installed
Byte 13
Bit 0 - 7 - Lane assist country (no ticks = Rest of the World)
Byte 14
Bit 0 - 7 - Steering type - Bit 0 = Right hand drive
Byte 15
Bit 0 - 7 - Windscreen heater for lane assist - Bit 0 = Installed
Byte 16
Bit 0 - 7 - Trailer recognition control module - No ticks = Not Installed
Live Data
Adaptations
use following link to spreadsheet with all adaptations channel details LINK
Live Data
Blindness detection
Calibration marks
Control module temperature
Current static calibration status
Current static calibration, details
Data logger triggering
Driving axis angle
Dynamic calibration, camera height offset
Dynamic calibration, details
Dynamic calibration, pitch angle offset
Dynamic calibration, roll angle offset
Dynamic calibration, status
Dynamic calibration, yaw angle offset
Existence probability of object
Front axle transverse position
High beam assistant, status
High beam recommendation
High beam, reason for shut-off
Highest recorded control module temperature
Last static calibrations, details
lowest recorded control module temperature
Object distance in x-direction
Object distance in y-direction
Outside air temperature
Rear axle transverse position
Search calibration target
Security Access: number of invalid keys
Standard - ambient data 1
Status of actuator test
Status of basic setting
Steering wheel angle
Street illumination
System run time
Vehicle detection during darkness
Vehicle speed
Visibility
Voltage terminal 15
Windshield heater for directional stabilization assistance
Yaw rate
() basic_value_spe
() Camera_information
() EH_Additional_In_Town
() EH_Additional_lanes
() EH_Additional_Ramp
() EH_Additional_Street_Class
() EH_Additional_Street_Class_Extended
() EH_Additional_Street_Situation
() EH_Additional_Structural_Separation
() EH_Additional_Toll
() EH_GPS_Altitude
() EH_GPS_Latitude
() EH_GPS_Latitude_Sign
() EH_GPS_Longitude
() EH_GPS_Longitude_Sign
() EH_No_Overtaking
() EH_Position_Position_Definite
() EH_Speed_Limit_Common
() EH_Speed_Limit_Restricted_Array
() EH_Speed_Limit_Time_Restricted
() EH_Speed_Limit_Type
() EH_Sys_Country_Code
() EH_Time_Restricted_Days
() EH_Time_Restricted_Hour_End_1
() EH_Time_Restricted_Hour_End_2
() EH_Time_Restricted_Hours_Start_1
() EH_Time_Restricted_Hours_Start_2
() EH_Variable_Message_Signs
() EHR_Position_Segment_ID
() FDD_reason_for_passive
() Fog_detected
() hca-Parameter_APP31_APP40
() HCA_Crashspeicher_Datensatz_0
() HCA_Crashspeicher_Datensatz_1
| Control unit: A9 Actuator For Structure-Borne Sound |  |
Just turn it off, that is what most people do.
Security Code
None
use following link to spreadsheet with all adaptations chanel details LINK
Output Test
Structure-borne sound actuator
Live Data
Driving profile selection
Security Access: number of invalid keys
This control module supports the following diagnostic sessions
OBD-diagnostic mode
VW-diagnostic mode
End of assemblyline mode (EOL)
Development mode