|
|
Post by johnnycass on Mar 21, 2018 17:43:09 GMT
Has anyone know how to activate tilting passenger door mirror when engaging reverse.
|
|
|
|
Post by ciscoinla on Mar 22, 2018 5:24:31 GMT
This YouTube video made it easy:
|
|
deevo
New Member
Posts: 4
|
Post by deevo on Mar 22, 2018 12:59:44 GMT
I think the op means enabling it via love g coding. I have tried the various codes that are kicking about but none work.
In theory it should just be a case of enabling the dipping rear view mirror and activating rear view memory position in the passenger door module and something in the central electronics (can't remember exactly what) but this does not work.
You need to make sure you have the memory module though. You can do this by going to the live data for the passenger door and make sure you are getting data from the memory, if you are not and therefore don't have the memory module I think you are going to be out of luck.
I'm still working on this myself though so will let you know if I have any luck.
Steve
|
|
|
|
Post by johnnycass on Mar 22, 2018 22:51:20 GMT
I tried yesterday enabling mirror_lowering_with_rear_gear
position_memory_with_rear_gear
The result was the mirror wouldn't move at all until I unabled. Thanks Steve let me know if you find anything.
|
|
muton
New Member
Posts: 6
|
Post by muton on Mar 24, 2018 7:23:32 GMT
52 passenger door---> Coding 07 ---> BYTE 4 ---> Bit 2 change from 0 to 1
52 passenger door---> Coding 07 ---> BYTE 4 ---> Bit 3 change from 0 to 1
MCE 09 ---> Security Acces 16 (31347) ---> Adaptatio 10 ---> pozs 17 activation 2
I tried this coding without success<- you need seat memory module to activate this function
|
|
deevo
New Member
Posts: 4
|
Post by deevo on Mar 24, 2018 9:01:22 GMT
Hi,
You do dot need the seat memory for this to work. However you do (I think) need the mirror memory module which you can look for in the live data.
|
|
|
|
Post by piupiu on Oct 3, 2022 15:05:37 GMT
52 passenger door---> Coding 07 ---> BYTE 4 ---> Bit 2 change from 0 to 1 52 passenger door---> Coding 07 ---> BYTE 4 ---> Bit 3 change from 0 to 1 MCE 09 ---> Security Acces 16 (31347) ---> Adaptatio 10 ---> pozs 17 activation 2 I tried this coding without success<- you need seat memory module to activate this function would you happen to be able to put this code in HEX? |
|
mat66
New Member
Posts: 1
|
Post by mat66 on Oct 15, 2022 16:57:51 GMT
It's pretty crazy that the b9 can't do this, my 2010 Golf did it without issues and that didn't have folding mirrors or fancy electric seats
|
|
deal
New Member
Posts: 8
|
Post by deal on Oct 22, 2023 13:40:00 GMT
I have recently enabled the mirror dip function. My car does not have the memory seat function. I suspect it could depend upon which door control modules are fitted, and possibly the type of mirrors (I had recently fitted power folding mirrors).
Once the OBD one-click app for Mirror dip is activated, follow this:
1) Switch ignition on
2) Engage reverse gear
3) Adjust the passenger side mirror to the desired curb view position
4) Engage neutral gear
5) Switch ignition off
6) Place mirror adjustment control dial to any setting other than the passenger side
Whenever reverse gear is selected, and curb view is required, Place the mirror adjustment dial to select the passenger side mirror, and the mirror will dip to position previously set in line 3 above. For the mirror to return to normal position, turn the mirror adjustment dial away from the passenger mirror selection.
I think some people have assumed the mirror dip function only requires the car to be in reverse, this is not the case, the passenger side mirror must be selected using the mirror adjustment dial.
|
|
