|
|
Post by fanfan26 on Jul 22, 2018 8:23:57 GMT
Hello, I didn't manage to activate that feature on my A4 2018 , I have followed the explainatioms given,unsecessfully . Can anyone help please ?
|
|
|
|
Post by Thirsty on Jul 22, 2018 11:47:04 GMT
|
|
|
|
Post by fanfan26 on Jul 22, 2018 14:32:15 GMT
Thanks a lot for your link , but I have just used the apps , I don't no much about coding do thats like reading Chinese lol |
|
|
|
Post by Thirsty on Jul 22, 2018 16:41:56 GMT
Then i'll try to explain this to you  1) Connect your device with your car 2) Run a scan(optional) 3) Click on little blue icon to get a list of all ECUs 4) Select the ECU with the number 52 5) Select Long coding 6) Move to Byte 04 7) Activate Bit 2 and Bit 3 That's it if you have any further questions feel free to ask. |
|
|
|
Post by fanfan26 on Jul 22, 2018 17:44:21 GMT
Then i'll try to explain this to you 1) Connect your device with your car 2) Run a scan(optional) 3) Click on little blue icon to get a list of all ECUs 4) Select the ECU with the number 52 5) Select Long coding 6) Move to Byte 04 7) Activate Bit 2 and Bit 3 That's it if you have any further questions feel free to ask. I managed to do it , but it still not working and I cannot open/close the windows with the key no more :-( |
|
|
|
Post by Thirsty on Jul 22, 2018 17:49:54 GMT
Do you have electrical seats?
|
|
|
|
Post by fanfan26 on Jul 22, 2018 17:59:01 GMT
Do you have electrical seats? No , just manual with electric Lombard |
|
|
|
Post by fanfan26 on Jul 22, 2018 18:04:03 GMT
Do you have electrical seats? No , just manual with electric Lombard Electric lumbar support and heated |
|
|
|
Post by Thirsty on Jul 22, 2018 18:26:03 GMT
Ok because you need memory seats for that feature.
It's working without aswell but not so good.
|
|
|
|
Post by fanfan26 on Jul 22, 2018 18:51:06 GMT
Ok because you need memory seats for that feature. It's working without aswell but not so good. Ok thanks , I won't add it then. Can you help with the windows opening thing please ? Do you think they have been disconnected because I have removed the comfort distance on opening doors ? |
|
|
|
Post by Thirsty on Jul 22, 2018 19:49:20 GMT
What do you mean with "comfort distance on opening doors"?
|
|
|
|
Post by fanfan26 on Jul 22, 2018 20:32:42 GMT
What do you mean with "comfort distance on opening doors"? There is an app called : confort Windows open/close range limitation . I have set it up on, ON |
|
|
|
Post by Thirsty on Jul 22, 2018 20:46:27 GMT
For comfort opening of windows/sunroof:
1) Select ECU 46
2) Coding
3) Byte 2
4) Activate Bit 2
After that check your mmi for settings.
|
|
|
|
Post by fanfan26 on Jul 22, 2018 21:18:30 GMT
For comfort opening of windows/sunroof: 1) Select ECU 46 2) Coding 3) Byte 2 4) Activate Bit 2 After that check your mmi for settings. Thanks , I'll have a look tomorrow.any other coding you can suggest me please ? |
|
|
|
Post by Thirsty on Jul 22, 2018 22:36:04 GMT
That depends on what you like |
|
|
|
Post by fanfan26 on Jul 23, 2018 5:03:11 GMT
For comfort opening of windows/sunroof: 1) Select ECU 46 2) Coding 3) Byte 2 4) Activate Bit 2 After that check your mmi for settings. Thanks , I'll have a look tomorrow.any other coding you can suggest me please ? That didn't work too ,in the mmi the feature is ticked anyway , but does not seem to work anymore .I'm not sure of what can have created this :-( |
|
|
|
Post by Thirsty on Jul 23, 2018 9:10:28 GMT
I think it's because you coded something wrong.
Undo all changes you made to the ECU that isn't working anymore.
|
|
|
|
Post by fanfan26 on Jul 23, 2018 9:23:37 GMT
I think it's because you coded something wrong. Undo all changes you made to the ECU that isn't working anymore. I will but to be honest all I did before talking to you that was installing apps from obdeleven and I did not install much , that's crazy cause I will have to pay now to undo them and do them again :-( |
|
|
|
Post by Thirsty on Jul 23, 2018 11:24:04 GMT
You can undo the changes manually without using the apps.
|
|
|
|
Post by fanfan26 on Jul 23, 2018 12:20:00 GMT
You can undo the changes manually without using the apps. For a newbie it s a bit hard , I didn't even managed to make them work so I'm scared of damaging the unit or getting errors I can't fix. |
|
|
|
Post by krisrock on Sept 26, 2020 9:22:16 GMT
Then i'll try to explain this to you 1) Connect your device with your car 2) Run a scan(optional) 3) Click on little blue icon to get a list of all ECUs 4) Select the ECU with the number 52 5) Select Long coding 6) Move to Byte 04 7) Activate Bit 2 and Bit 3 That's it if you have any further questions feel free to ask. unfortunately it doesn't work with this guide, any other options? |
|
pt16a4
Junior Member
Posts: 83
|
Post by pt16a4 on Oct 25, 2020 21:06:04 GMT
I read that memory mirrors are required, for this feature to work well. By checking live data from the Passenger Door (52), you can verify if you have memory mirrors (something about 250% vs. variable settings).
I do not have power or electric seats, but apparently it should still work.
|
|
pt16a4
Junior Member
Posts: 83
|
Post by pt16a4 on Mar 31, 2021 17:24:48 GMT
Not sure how or why, but my mirror now dips when the vehicle is in reverse, returning to the original position thereafter.
I didn't use the app as I didn't think it would work for me. Don't know what adaptation I have activated that would enable the dip, certainly nothing visible via MMI.
Any ideas?
|
|
deal
New Member
Posts: 8
|
Post by deal on Oct 22, 2023 13:41:20 GMT
I have recently enabled the mirror dip function. My car does not have the memory seat function. I suspect it could depend upon which door control modules are fitted, and possibly the type of mirrors (I had recently fitted power folding mirrors).
Once the OBD one-click app for Mirror dip is activated, follow this:
1) Switch ignition on
2) Engage reverse gear
3) Adjust the passenger side mirror to the desired curb view position
4) Engage neutral gear
5) Switch ignition off
6) Place mirror adjustment control dial to any setting other than the passenger side
Whenever reverse gear is selected, and curb view is required, Place the mirror adjustment dial to select the passenger side mirror, and the mirror will dip to position previously set in line 3 above. For the mirror to return to normal position, turn the mirror adjustment dial away from the passenger mirror selection.
I think some people have assumed the mirror dip function only requires the car to be in reverse, this is not the case, the passenger side mirror must be selected using the mirror adjustment dial.
|
|
