|
Post by valdimar on Jul 30, 2018 5:48:51 GMT
As in the subject - Audi A3 1.6 BSE 2008-09 , for some days the car "greets" me info on the FIS about the need for service inspection and oil change, if the info about the oil I deleted using a combination of keys is a message about the necessary review I can not delete. I found a video on this topic on YouTube - I am connecting to Adaptations - I can not do anything - when I try to enter 3 (undo) I get "31 not available" what is going on? Of course, the application in the Pro version. How do I change these values? Regards
|
|
|
Post by Thirsty on Jul 30, 2018 6:00:12 GMT
For service reset do this: For oil service it's the same but you have to stay on the oil service reminder. However here's a video of resetting it: I hope this will fix your issue
|
|
|
Post by valdimar on Jul 30, 2018 9:36:05 GMT
Unfortunately, it's not that easy, or I'm doing something wrong or my A3 is immune to these actions. After connecting to the car, I entered the Indicator Set - Adaptations (channel 002) where the value was "1", after entering "0" I received information that "adaptation was accepted" after logging out and disconnecting OBDeleven, switching off the ignition and turning it back on again information about the remaining time to the site without any change. Is it possible that the OBDeleven bluetooth interface will not revoke the service on this AUDI model? Thirsty (Germany) - I saw this video, but first of all I do not want to inspect oil - I've deleted it a long time ago - I want to revoke the service review to be in about 22 days and the car is after replacing everything that belongs to him (I care for "her" )
|
|
|
Post by Thirsty on Jul 30, 2018 10:33:58 GMT
Just to make things clear: You want to reset your service reminder and oil service reminder right?
|
|
|
Post by valdimar on Jul 30, 2018 10:46:33 GMT
Yes, I would like to reset the indication of the remaining time to the service review because I have already deleted the info about the need to change the oil. I would like it to count this time from the beginning. All reset methods using a combination of buttons found on the network do not work in the event of a service inspection reset. Regards.
|
|
|
Post by Thirsty on Jul 30, 2018 11:33:31 GMT
That's strange... I did some research and other users are having this issue aswell. This Thread could help you aswell: forum.obdeleven.com/thread/205/service-resetHere's a list of all Channels with service info that i found: 1) ECU 17 1.1) Channel 002(Service interval) Description: Reset the service intervals. Displayed values: 0 - no service due 1 - service due Adjustment value: 0 - delete service 1.2) Channel 40(driven distance since last service) Description: The input of the respective setpoint is only possible in steps of 10 km, thus the display is also shown. 1.3) Channel 41(Time since last service) Description: The input of the respective setpoint is only possible in steps of days, thus the indication in the display takes place in days. 1.4) Channel 47(soot ingress) Description: The specified value represents a comparison value (0 - 600) for the service display. The displayed value is a calculated value for the soot content in engine oil, based on a distance of 100 km. 1.5) Channel 48(thermal load) Description: The specified value represents a comparison value (0 - 600) for the service indicator. The displayed value is a calculated value for the thermal load in the engine oil, based on a distance of 100 km. I would say there's no need to change values in 1.4 & 1.5. 1.1-1.3 should be values to change. But no guarantee that it works and don't reset channels that you don't know what they're for!
|
|
|
Post by valdimar on Jul 30, 2018 14:35:05 GMT
I was also in the part of my search for these channel lists, but I do not know much about these matters too much. I read a little about ready applications for changes in different parameters (one click app) where there is something to my model, I have to try it in my free time, I hope I will not ruin it. Regard.
|
|
|
Post by Thirsty on Jul 30, 2018 15:38:40 GMT
Keep us updated
|
|
|
Post by valdimar on Aug 3, 2018 14:44:25 GMT
Thanks for your help, I used the One Click App option, although I read on the net that not everyone works, I succeeded and counts everything from scratch. Now I will recommend OBDeleven Bluetooth to everyone, it was a really good purchase. Regards.
|
|