evert
New Member
Posts: 6
|
Post by evert on May 21, 2019 8:17:07 GMT
Hello,
Since I have upgraded the front brakediscs and pads (because brake judder issues), the bdw function is noticeble on the car. The car decelerates about 3-4kmh and then shoots of again. Probably because the new brakes have far better bite.
I have tried to deactivated the function in the ABS module channel 55. But it keeps back returning to 1. What do i need to do to? Better was to reduce the applied pressure and keep the functionality, but I believe it is only on or off.
Regards, Evert
|
|
|
Post by vwjap on May 21, 2019 8:23:28 GMT
Strange the golf has 3 options (sorry I know nothing of Audi)
Golf codind
Break Drying System Select Control unit 03 (ABS) Adaptation Select: Disc Drying Options: Weak-Normal-Hard
|
|
evert
New Member
Posts: 6
|
Post by evert on May 21, 2019 9:19:01 GMT
Yes I know, maybe because your Golf is younger. But how do I get the change to stick?
|
|
|
Post by adiwob on May 21, 2019 14:29:20 GMT
Maybe you need a security code or before trying change service to vw or development.
|
|
evert
New Member
Posts: 6
|
Post by evert on May 21, 2019 19:23:53 GMT
Where can I find these security codes, and where do I enter the code? The second part of your answer I don't understand.
|
|
|
Post by adiwob on May 22, 2019 5:59:21 GMT
|
|
evert
New Member
Posts: 6
|
Post by evert on May 22, 2019 9:46:41 GMT
Hello Adiwob,
Thx for your response, my dongle isn't working at the moment (only solid red led). I have already contacted odb11 and waiting for an answer. So I will post the abs nr. when its working.
|
|
|
Post by vwjap on May 22, 2019 11:20:45 GMT
Check your battery isn’t a little low, and also your internet is good
|
|
evert
New Member
Posts: 6
|
Post by evert on May 22, 2019 18:43:37 GMT
Tonight the dongle suddenly worked, don't know why. At secured acces there are some logins provided, one of them is accepted. Tried different services and changed the value and it keeps turning back to 1 (activated).
Softwarenr. 8j0910517a version 0030
Any sugestions?
|
|
|
Post by adiwob on May 23, 2019 6:18:34 GMT
Try with both service mode: vw-development and development mode after that put security code 40168 wait 1 minute then go to adaptation channel 55 and make the changes.
|
|
evert
New Member
Posts: 6
|
Post by evert on May 24, 2019 12:15:22 GMT
Vw mode is not available, probably because it is an Audi. Developmentmode keeps saying, acces denied even after a i put in the code at secured acces.
|
|