|
Post by damian1984 on Jun 2, 2019 11:53:00 GMT
Witam. Jestem nowym na forum i zarazem szczesliqym posiadaczem a3 z 2009r.Dolozylem navi.i niestety nie dziala wyjscie aux moze ktos zna kody dzieki ktorym zlikwiduje problem... dodam ze zakupilem obdwlwn pro do rozwiazywania takich trudnosci. Za pomoc zgory dziekuje.
|
|
|
Post by damian1984 on Jun 3, 2019 21:37:22 GMT
Hello. I am new to the forum and at the same time I have been a3 owner of 2009.kupilem navi.i unfortunately, there is no way out someone can know the codes thanks to which he will solve the problem ... I will add obdeleven pro to solve such difficulties. Thank you for your help.
|
|
|
Post by adiwob on Jun 4, 2019 5:56:31 GMT
Hello. I am new to the forum and at the same time I have been a3 owner of 2009.kupilem navi.i unfortunately, there is no way out someone can know the codes thanks to which he will solve the problem ... I will add obdeleven pro to solve such difficulties. Thank you for your help. Go to navi->info->post your software number to find the coding
|
|
|
Post by damian1984 on Jun 4, 2019 6:15:54 GMT
Przejdź do navi-> info-> opublikuj swój numer oprogramowania, aby znaleźć kod
niestety nie chodzi mi o kod do radia ale jak moge aktywowac wyjscie aux. Dodam ze z wczesniejszym radiem dzialo ale po dolozeniu radio navi. mmi przestalo...
|
|
|
Post by damian1984 on Jun 4, 2019 9:30:31 GMT
Unfortunately, I do not mean the code for the radio but how can I activate the aux output. I will add with the earlier radio works but after adding the navi radio. mmi it stopped ...
|
|
|
Post by Thirsty on Jun 4, 2019 9:46:49 GMT
Unlock RNS-E Aux-INAfter retrofitting the clinch plug at the connection of the RNS-E (back-quadblock), you can select the AUX-IN under source. Coding: 1) ECU 37(Navigation) 2) Coding 3) xxxxx?x 4) Increase value with +4 SourceUnlock Aux-IN for RadioWith the radios of Generation II + Concert, Chorus and Symphony you have the opportunity to unlock the AUX IN interface with the Audi A3 8P Coding: 1) ECU 56(Radio) 2) Coding 3) # 0?x0xxx 4) +1 = Analog Input(Aux) +2 = Multifunction Steering Wheel +4 = Telephone Source
|
|
|
Post by damian1984 on Jun 4, 2019 21:47:50 GMT
Unlock RNS-E Aux-INAfter retrofitting the clinch plug at the connection of the RNS-E (back-quadblock), you can select the AUX-IN under source. Coding: 1) ECU 37(Navigation) 2) Coding 3) xxxxx?x 4) Increase value with +4 SourceUnlock Aux-IN for RadioWith the radios of Generation II + Concert, Chorus and Symphony you have the opportunity to unlock the AUX IN interface with the Audi A3 8P Coding: 1) ECU 56(Radio) 2) Coding 3) # 0?x0xxx 4) +1 = Analog Input(Aux) +2 = Multifunction Steering Wheel +4 = Telephone Hello. I tried to change the code according to the instructions but unfortunately, some other ideas could not help solving the problem ...
|
|