|
|
Post by Carolco on Aug 8, 2019 17:43:23 GMT
Hello to all.
Someone has removed the battery from the car. I need to run a cable from the engine into the car through the cable glands and I am concerned about the issue of errors after connection.
can anyone advise me?
thank you
|
|
|
|
Post by vwjap on Aug 8, 2019 19:51:41 GMT
Presume it would be just like after a flat battery, drive it to clear some errors then clear the rest with obdeleven
|
|
|
|
Post by Carolco on Aug 8, 2019 21:09:26 GMT
Turn off the negative first or it is the same?
|
|
|
|
Post by dv52 (Australia) on Aug 8, 2019 23:58:26 GMT
^^^ to add to the sage advice that you have already received, depending on whether your car has a battery monitor control module (J367), you might want to update the battery details in the Gateway module (@ address hex19) - that way, the new battery will be recognized by energy management facility in the car and charging profiles will be appropriately tailored.
Don
|
|
|
|
Post by Carolco on Aug 9, 2019 23:39:58 GMT
The battery will be the same. I need plug off the battery for pass a wire of the parking assist by the firewall to the unit of the parking assist.
with the battery in his position is imposible pass the wire to the firewall
|
|
