|
Post by cosa001 on Sept 28, 2019 20:44:27 GMT
Can someone.help me to find turbo boost live data, I went into engine and into Live data and imported all the options it gave me and still cant find Live boost data in Bar or Psi. Thanks for help...
|
|
|
Post by dv52 (Australia) on Sept 28, 2019 21:41:56 GMT
^^^ cosa001: From memory, I believe that the relevant parameters are Charge air pressure specified value and Charge air pressure: actual value - the measurement units are PSI (as they should be).
But please be aware that the values are above atmospheric pressure - so if you want absolute measurement. you will need to subtract ambient (which is also measured in Live data).
Don
|
|
|
Post by cosa001 on Sept 29, 2019 4:18:26 GMT
Yea I have found that info online but the problem.is that I dont have that on my obd(pro)😟, how is that posible...
|
|
|
Post by dv52 (Australia) on Sept 29, 2019 5:23:34 GMT
Yea I have found that info online but the problem.is that I dont have that on my obd(pro)😟, how is that posible... Well ....... it's possible because anything is possible!! Works perfectly OK on my car- see below
It's done like this:
- Start engine - start OBD11 software - connect to dongle
- Select the Engine module @ address hex01
- Select Live data
- Search for "Charge" (note: on ODB11, search vectors are case sensitive - so use Capitol "C")
- Select parameters shown in picture - and Ambient Pressure if you want (because Boost pressure is measured above ambient pressure)
Don
PS: I lied - clearly the pressures are measured in Pascals
|
|
|
Post by cosa001 on Sept 29, 2019 8:05:29 GMT
I dont know how can it be posible? An obd device is all the same, if I have it and my car has a turbocharger then why doesnt it have that option? Right? And No I dont have that options, just some others but dont know how to post pic here...
|
|
|
Post by dv52 (Australia) on Sept 29, 2019 8:21:52 GMT
I don't know how can it be possible? An obd device is all the same, if I have it and my car has a turbocharger then why doeskin it have that option? Right? And No I don't have that options, just some others but don't know how to post pic here... Us mere mortals (like you and me) can't actually post pictures on this forum -only the OBD11 deities can do that! What you need to do is to load your picture onto a 3rd party hosting site (like imgur, dropbox etc). Then you post a link to the picture here by clicking on this . button at the top of the create post
If you are going to post a picture, scroll down the Live data list until you see the other entries in my picture (I want to see which options you have missing near my entries)
Don
PS: Did you remember that the search is case sensitive?
|
|
|
Post by cosa001 on Sept 29, 2019 9:39:35 GMT
|
|
|
Post by dv52 (Australia) on Sept 29, 2019 19:50:16 GMT
^^^^ so you have at least one of the parameters in your pictures - the other one must be there as well, somewhere\ Don
|
|